disGRUNTled
Well-Known Member
Super sour diesel drinking a Southern Swells Not The Gumdrop Buttons Beerliner Weisse .And Rangers preseason hockey.
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
muunch
hotboxing the cockpit
... both?
You need to put it on top of herbs though, if you're putting it down there. Or have a screen/pad for concentrates. It would just melt and pull through otherwise. The herbs give it something to melt into rather than just falling into the water.
You can dab it up top too, though. It vaporizes as a concentrate would, I find capping to really help catch all the vapor though, so showercap is pretty much necessary if you're dabbing CBD if you ask me.
It works great either way, dabbed or vaped with herbs. Really great.
Last edited:
Here is a little user 'clip' tip for anyone getting the new NewVape stand and debowler. One of the things I had an initial problem with is that my old favorite dabbers did not fit in the custom NewVape dabber holes. NewVape dabbers work perfectly, but two old favorite dabbers were too small in diameter to fit the hole and would just fall over. This cheap little fix got my favorite dabbers to work with this fantastic stand.
All it takes is a little file clip and any dabber you put in it won't fall over.
"I'm not a fanboy!"
*Puts NewVape stickers on everything*
;P
Ooooh, those clips are a great idea! I've got one of those stands on the way so nice one, thanks for the idea!
muunch
hotboxing the cockpit
@disGRUNTled taking a page from @ataxian book I see btw 
goes without saying but (a very large) +1
I wanna get that new stand, but how is it getting the abv out of that dish afterwards? I like to have my FP on 24/7 so might be difficult unless wearing oven mitts
goes without saying but (a very large) +1
I wanna get that new stand, but how is it getting the abv out of that dish afterwards? I like to have my FP on 24/7 so might be difficult unless wearing oven mitts
hey @emmdeemo buddy, I admitted practicing fanboyism a while back so be nice to me
Let us never speak of it again
lazylathe
Almost there...
Here is a little user 'clip' tip for anyone getting the new NewVape stand and debowler. One of the things I had an initial problem with is that my old favorite dabbers did not fit in the custom NewVape dabber holes. NewVape dabbers work perfectly, but two old favorite dabbers were too small in diameter to fit the hole and would just fall over. This cheap little fix got my favorite dabbers to work with this fantastic stand.
All it takes is a little file clip and any dabber you put in it won't fall over.
Stoner engineering at it's finest ladies and gents!!
Love that you even used the silver ones to match!
muunch
hotboxing the cockpit
I guess I can try this if you want btw
not that it requires much effort... but I want to at least pretend I'm doing something productive over here, rather than "just" getting stoned off my ass tonight.How much do you use in the SV3 and do you break them down after drying it out? I definitely think there's too much airflow to really decimate full nugs but maybe I'm wrong. I know that taking a hit off a fat nug, then using a poker to break it down in the bowl would absolutely work however.
edit:
what is this scuff you're on about? lol
FlowerPot Discovery #37
A dear friend shared some of his scruff. Normally I would not even try to vape this stuff, but what the hell? Filled the fine grind, loaded the showerhead and capped from the start. Mid hit removed cap and voila, milk city. Milk city from scruff. Amazing.
You just gotta love the FlowerPot. The more I use it the more I love it.
This is another reason I love the FP/SH. One of the things I loved about the volcano was that the bowl was so big that I could put absolute crap in it and still manage to get an effect after a few crazy full bowls, turned up to full power. Same with the fantastic bowl size on the FP/SH, and its temp setttings.
Volcano could, in an emergency, deal with fresh material too. Same with the FH/SH, but it deals with it so much better than the volcano (at least one bag, maybe two, would just be full of moisture and me cough like fuck).
lazylathe
Almost there...
I guess I can try this if you want btw
How much do you use in the SV3 and do you break them down after drying it out? I definitely think there's too much airflow to really decimate full nugs but maybe I'm wrong. I know that taking a hit off a fat nug, then using a poker to break it down in the bowl would absolutely work however.
edit:
what is this scuff you're on about? lol
The S3 has the ability to decimate a whole nug without any problems at all.
Lots of different types of heating going on that makes it so potent!
I found the same as you with the FP!
Awesome flavor on whole nugs then you break it up for milk city!
Gotta love the versatility!
Same. This is how I use my basket screen, whole nug chunk, then break up after a few hits.
goodpunk6
Well-Known Member
@disGRUNTled taking a page from @ataxian book I see btw
goes without saying but (a very large) +1
I wanna get that new stand, but how is it getting the abv out of that dish afterwards? I like to have my FP on 24/7 so might be difficult unless wearing oven mitts
Would love to know this myself. I currently have the kickstand and leave mine on for hours at a time and it gets pretty hot. Not unbearably hot but I'm not going to touch the part closest to where the coil rests. I bet the debowler gets just as hot if not a touch less. Its bigger than the kickstand and should be able to absorb and dissipate heat better because of its larger surface area. We will certainly find out after I order my stuff next friday. I'll be more than happy to buy a laser thermometer and try it out.
You're speaking my language. The Volcano has the power to transform the most dead of dead herbs into a vapor bag. Awesome if you're somewhere like Mexico. A great vape that served its purpose for me for a long time, but ultimately too harsh and too much hot air.
Showerhead inserts would be awfully tempting, for me it was really a tough choice over the D-Nail Halo wraparound. I figured I have a bunch of other concentrate devices though, plus I really like dabbing off my little 10mm mini tube. Without using the regular Flowerpot I have no idea what the right move was, but all the talk about the Showerhead sold me. I figure if it extracts flowers as well as folks say I might not even feel like dabbing so much.
muunch
hotboxing the cockpit
@invertedisdead you definitely made the right move getting the showerhead over the other option. really. can't stress it enough. the taste of the ti really isn't all that terrible and passes with flying colors over here since I sure as shit am not changing out heads, and torch+banger dabbing wasn't my favorite way of consumption.
i'll stand by my earlier statement about the flowerpot+showerhead being the best cannabis-related purchase i've made
i'll stand by my earlier statement about the flowerpot+showerhead being the best cannabis-related purchase i've made
ataxian
PALE BLUE DOT
I use a MOD with a GOON 24cm tank with tank coils with Organic cotton for wicking.@disGRUNTled taking a page from @ataxian book I see btw
goes without saying but (a very large) +1
I wanna get that new stand, but how is it getting the abv out of that dish afterwards? I like to have my FP on 24/7 so might be difficult unless wearing oven mitts
I cover the coil's with ejuice 0 NIC & KIEF with a 5/3 ratio.
I was going to get a FLOWER POT however I heard there not for MEDICAL NEED'S!
They seem CIVILIZED actually?
I only do about .2 grams ROSIN per day so?
@invertedisdead I never tried a bag?
Where I live that would be wrong to do.
1970 I smoked pot for the first time so I'm a rookie actually!
1972 HONEY OIL $10/gram was what we used to wipe our ZIG ZAG'S to roll a joint?
We used ALUMINUM FOIL, STICK MATCH and a FAST FOOD straw at the bathroom on the beach!
THAI STICK'S were the fashion at the time. They tasted like PEPPER MINT so we thought maybe they were laced with something? (they seemed strong)
Before BRICK WEED MEXICO OAXACA had these large COLA'S (in SPANISH TAIL'S).
When we surfed Puerto ESCONDIDO we smoked COLAS.
Last edited:
Bro this quality made in America product is definitely for medical needs, and was a large influence in my buying decision. I like that I actually can SEE what is in the vapor path instead of just what marketing directors SAY. Also the owner shows pride of ownership and actually uses vaporizers. I get the impression most of these other brands do not even use herb, they are just looking to capitalize on a trending profitable industry. Newvape is the real deal.
Another thing that sold me is that all of the electronics for the Flowerpot are self contained and not proprietary. When my Volcano broke, my only option was to pay S&B their extortion fees for repair.
For the same price I am getting a whole new vaporizer instead.
I think the flowerpot represents quite an evolution from the old knife hits of yesteryear! Almost CIVILIZED?
muunch
hotboxing the cockpit
@ataxian FP is definitely for medical needs my friend. it gets me medicated beyond belief!
this thing is definitely as safe as it gets as far as materials. I do wish one day for all glass/quartz but this thing is more than sufficient for a desktop herb-pulverizing machine, and like demonstrated, it sure looks great by a poolside!
enjoying some purple og terpsauce dipped in cbd crystals
hope everyone has/had a great night
this thing is definitely as safe as it gets as far as materials. I do wish one day for all glass/quartz but this thing is more than sufficient for a desktop herb-pulverizing machine, and like demonstrated, it sure looks great by a poolside!
enjoying some purple og terpsauce dipped in cbd crystals
hope everyone has/had a great night
ataxian
PALE BLUE DOT
I'll check it out?@ataxian FP is definitely for medical needs my friend. it gets me medicated beyond belief!
this thing is definitely as safe as it gets as far as materials. I do wish one day for all glass/quartz but this thing is more than sufficient for a desktop herb-pulverizing machine, and like demonstrated, it sure looks great by a poolside!
enjoying some purple og terpsauce dipped in cbd crystals
hope everyone has/had a great night
Grifo
Well-Known Member
Wheres the beef?
I use about .1g-.15g in the sv3 and never, ever break them down because it's absolutely not required. The sv3 obliterates whatever you put in it, and other than the herbalaire and vapolution, I can't think of any vape that is as good and efficient with unground material. But, different strengths for different vapes. The FP is convection, so should more than likely require somewhat of a shred (like you do), and stir has been recommended by some, and not by others. I just hope that this vape doesn't turn out like my lsv, nano, vhw, etc...convection vapes that annoyed me with hotspots and stirring, yet this one seems to not share those same issues @lazylathe you were mentioning?
One of the biggest reasons I want this bad boy is due to all the feedback from the sv3 and FP fanboys! But thanks to everyone, this thread has such a similar vibe to the sv3 thread!
Just curious about that ti taste claim? Is it really noticeable? Something i've never ever tasted with the sv3...only taste the tasty herbs, never the metal!
I think it refers to low quality herbal essences. But I could be wrong!
Last edited:
muunch
hotboxing the cockpit
Def no hotspots no matter how fast you pull. Stirring is not required either, except with the unground nuggies. I think maybe those that are stirring are either trying to get every last bit of material, or haven't upgraded to the SH. I get barely a puff after I stir my bowls when I think they're "done."
I don't notice any ti taste and still get blown away by how good the taste is, since I really wasn't expecting it to give decent taste...through water and all that shit.
I don't notice any ti taste and still get blown away by how good the taste is, since I really wasn't expecting it to give decent taste...through water and all that shit.
Last edited:
If it has a metallic taste I'll let you know. I don't even drink out of metal cans or cups because I don't like the metallic taste, though they are typically stainless steel or aluminum. Don't think I've ever drank from a titanium cup, but I imagine they have them at the outdoor store for lightweight backpacking. I don't like drinking out of plastic either.
anasrzi
Well-Known Member
I find it hard to go above 675f with my flowerpot and dnail SiC dish, the flavour goes down hill to much for my liking when using herb. Been experimenting once more this week end and think I'm closing in on what my ideal temp is.
I think between 630-640f is going to be around about ideal for me for flavour it's just the extraction at these low temps that sucks a bit, perhaps a little time sat on the bowl will help with that, little bit of conduction to help that out?
I'm eager to get more uses out of my SiC dish now. Tired some high end bubble in it last night, good flavour and cleaned ok with a qtip but I find the taste suffers after a qtip clean, anyone else find this? So I'm going back to pressing some bubble hash rosin and dab I think from there.
Trying to find a sweet spot for both oil and herb is tricky without sacrificing flavour.
I think between 630-640f is going to be around about ideal for me for flavour it's just the extraction at these low temps that sucks a bit, perhaps a little time sat on the bowl will help with that, little bit of conduction to help that out?
I'm eager to get more uses out of my SiC dish now. Tired some high end bubble in it last night, good flavour and cleaned ok with a qtip but I find the taste suffers after a qtip clean, anyone else find this? So I'm going back to pressing some bubble hash rosin and dab I think from there.
Trying to find a sweet spot for both oil and herb is tricky without sacrificing flavour.