Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

little maggie

Well-Known Member
I blame @steama for this question. Sorry if it's already posted somewhere. What is the absolute minimum for only using flowers. I tried to figure that out but, in spite of comments about its simplicity, that was too complicated for me. Possibly a sign that this vape is too complicated as well but I'm curious.
 

muunch

hotboxing the cockpit
@little maggie

get what @SoDelicious just posted, except replace 2951 with 3004. (edit: and the bowl with whatever size bowl your main glass piece uses)

you COULD theoretically skip the showercap carb cap as well, unless you planned on doing concentrates, but that's up to you. others like the carb cap for flowers, but i don't need it at all.
 
Last edited:

little maggie

Well-Known Member
@little maggie

get what @SoDelicious just posted, except replace 2951 with 3004. (edit: and the bowl with whatever size bowl your main glass piece uses)

you COULD theoretically skip the showercap carb cap as well, unless you planned on doing concentrates, but that's up to you. others like the carb cap for flowers, but i don't need it at all.
Is an enail controller needed for just flowers?
 

muunch

hotboxing the cockpit
The showerhead is an all in one unit. As of right now, there are no inserts for it, you dab on the Ti ring around the inlet hole.

That's why the temps we use are so high. The bowl where the flower sits is well below the coil... which is what we are controlling the temp of. The dabbing surface rests above the coil, and the flowers sit in a bowl below it. You put the bowl with the flowers onto your glass piece, and then put the showerhead+coil on top.

It is much simpler once you have it all in front of you.

I think this vape and its wide open draw... and the fact it's used 90% of the time thru water (cept for some crazy ones using it thru a jhook:freak:) will be less harsh on your lungs than a lot of other vapes. None of us sensitive folk have issues. The flavor is much better than I expected, and it has no issues with microdosing either.

In fact, I think getting it all in one puff makes microdosing a bit easier to manage... Not that I'm doing it much... just theorizing about it :myday:

Anyway, I'm starting to sound like a fanboy now... :tinfoil: ...
 
Last edited:

EmDeemo

ACCOUNT INACTIVE
The showerhead is an all in one unit. As of right now, there are no inserts for it, you dab on the Ti ring around the inlet hole.

That's why the temps we use are so high. The bowl where the flower sits is well below the coil... which is what we are controlling the temp of. The dabbing surface rests above the coil, and the flowers sit in a bowl below it. You put the bowl with the flowers onto your glass piece, and then put the showerhead+coil on top.

It is much simpler once you have it all in front of you.

I think this vape and its wide open draw... and the fact it's used 90% of the time thru water (cept for some crazy ones using it thru a jhook:freak:) will be good for your lungs. None of us sensitive folk have issues. The flavor is much better than I expected, and it has no issues with microdosing either.

In fact, I think getting it all in one puff makes microdosing a bit easier to manage... Not that I'm doing it much... just theorizing about it :myday:

Anyway, I'm starting to sound like a fanboy now... :tinfoil: ...

I've been basket screen micro dosing (micro is a debatable term I guess), which means the flower is even further away from the heat, keeps all the flower in one location, it cant fly around or have the heat fly passed and miss any bits of flower. Means micro dosing in one hits is a breeze.

I'm only doing this to try and get my fucking usage down after two months of hitting the FP stupidly hard every day :D
 
I've been following this thread for awhile now and made the jump late August. I really can't wait to try this thing and see for myself how it performs.

I thought I'd be joining the club this week..My flowerpot shipped on September 6, arrived in Canada on the 14th, cleared customs in Montreal an hour away from me on the 19th and now the last 2 scans are back in Florida! Wtf is going on?
I'm really hoping not to have to wait another 2 weeks +. I wish I could have bought it through a Canadian retailer and avoided this, but I looked everywhere and no one seems to have it. It's very surprising considering how big the market is over here especially with weed on the verge of being legalized.
 

stoneleopard

Well-Known Member
I've been following this thread for awhile now and made the jump late August. I really can't wait to try this thing and see for myself how it performs.

I thought I'd be joining the club this week..My flowerpot shipped on September 6, arrived in Canada on the 14th, cleared customs in Montreal an hour away from me on the 19th and now the last 2 scans are back in Florida! Wtf is going on?
I'm really hoping not to have to wait another 2 weeks +. I wish I could have bought it through a Canadian retailer and avoided this, but I looked everywhere and no one seems to have it. It's very surprising considering how big the market is over here especially with weed on the verge of being legalized.
A Canadian retailer for NV would be sweet
 

EmDeemo

ACCOUNT INACTIVE
I've been following this thread for awhile now and made the jump late August. I really can't wait to try this thing and see for myself how it performs.

I thought I'd be joining the club this week..My flowerpot shipped on September 6, arrived in Canada on the 14th, cleared customs in Montreal an hour away from me on the 19th and now the last 2 scans are back in Florida! Wtf is going on?
I'm really hoping not to have to wait another 2 weeks +. I wish I could have bought it through a Canadian retailer and avoided this, but I looked everywhere and no one seems to have it. It's very surprising considering how big the market is over here especially with weed on the verge of being legalized.

A Canadian retailer for NV would be sweet

Email/call/visit your favourite retailer and tell them you want to buy it through them.
 
Email/call/visit your favourite retailer and tell them you want to buy it through them.

For sure, and I have asked around, but when the shower head was released I just couldn't resist any longer.
I still don't understand why the supposed best desktop isn't readily available, maybe it's all the options that makes their brains hurt and give up? Can you guys in the U.S buy a flowerpot at a local store or online? Or mostly directly from newvapes site?
 

EmDeemo

ACCOUNT INACTIVE
For sure, and I have asked around, but when the shower head was released I just couldn't resist any longer.
I still don't understand why the supposed best desktop isn't readily available, maybe it's all the options that makes their brains hurt and give up? Can you guys in the U.S buy a flowerpot at a local store or online? Or mostly directly from newvapes site?

Sorry, I was just parroting my FP mantra!

I dont think its been out that long, relatively speaking, tbh. I'm pretty sure we've all bought direct from NV, hence attempts to get it stocked locally.

Didnt mean to include your postage issues into my mantra! Apologies, that postage thing you're going thru would drive me crazy.
 

Doktor Dub

Well-Known Member
I blame @steama for this question. Sorry if it's already posted somewhere. What is the absolute minimum for only using flowers. I tried to figure that out but, in spite of comments about its simplicity, that was too complicated for me. Possibly a sign that this vape is too complicated as well but I'm curious.

I do not own the FP now but i think i can answer you question:

You need definitly:
  • an e-nail controller and a coil (Newvape or something of your choice, without there is no heat to Vape..)
  • showerhead combo (the heart of this vape)
  • a bowl, choose according to the glass pieces you wish to use (male/female, 14 or 18 mm)
you should probably buy:
  • a stand (cheapest one / kickstand is 10$ i think, you could also build something yourself or use the stand for a solderung iron)
  • the showercap (for dabs and many people like it for flower also, makes for bigger clouds)
the rest is optional, perhaps you want a nicer stand or something...
 

biohacker

Well-Known Member
I'm only doing this to try and get my fucking usage down after two months of hitting the FP stupidly hard every day :D

I know someone that will be in your shoes in about two months! :rofl:

I just wanted to say that all of you guys are incredible, and so very helpful! I wish I pulled the trigger on this one WAY back when it was just released!

@SoDelicious it makes me feel good that you bought one again! Our lineups and tastes are so similar dude! And after having the sv3, and you decided to go with a showerhead, speaks volumes!

thanks @emmdeemo !

Sounds like this community is similar to the Supreme v3! Nothing but love! :love:
 

EmDeemo

ACCOUNT INACTIVE
I know someone that will be in your shoes in about two months! :rofl:

I just wanted to say that all of you guys are incredible, and so very helpful! I wish I pulled the trigger on this one WAY back when it was just released!

@SoDelicious it makes me feel good that you bought one again! Our lineups and tastes are so similar dude! And after having the sv3, and you decided to go with a showerhead, speaks volumes!

thanks @emmdeemo !

Sounds like this community is similar to the Supreme v3! Nothing but love! :love:

Welcome! Welcome! Welcome one and all!

 

muunch

hotboxing the cockpit
welcome @biohacker :D

glad we have a vape to chat at the watercooler about now! this thing is awesome. will look forward to hearing your thoughts and comparisons. i suspect this thing will have no problem contending with any other you've tried;)

if you have the balls to use it with a claisen, let me know. i'm still too afraid... maybe this weekend though.

tubo + fp... ? :hmm::science:
 

lazylathe

Almost there...
Here is a pic of my little NV FlowerPot vape shrine. As you can see I am sporting the new stand which is exceptional. It keeps all the pieces I use in one place and it is very secure and stable. One other thing, I have been dying to use the NewVape box/stand as my special stash box to keep special things. Yes, it is expensive for a box but it has the NV logo on top and who do you know that has a box as cool as this NewVape Box?

I have been trying to come to terms with the fact I have became a fanboy. When I looked at myself in the mirror this morning I peered into my eyes and called myself a fanboy. After about thirty seconds of contemplation I realized this is true. I might as well enjoy it.

shrine.jpg


:cheers:

:peace:

Bravo!!! Well said!
I have vape station envy bro!!
And you are most definitely correct, that New Vape stash box is sweet!

I think when my Showerhead arrives, i will join you in fanboyism!
 
I've been following this thread for awhile now and made the jump late August. I really can't wait to try this thing and see for myself how it performs.

I thought I'd be joining the club this week..My flowerpot shipped on September 6, arrived in Canada on the 14th, cleared customs in Montreal an hour away from me on the 19th and now the last 2 scans are back in Florida! Wtf is going on?
I'm really hoping not to have to wait another 2 weeks +. I wish I could have bought it through a Canadian retailer and avoided this, but I looked everywhere and no one seems to have it. It's very surprising considering how big the market is over here especially with weed on the verge of being legalized.

Update: it looks like it was a glitch on usps tracking. The flowerpot is sitting just 1 hour away. I can feel it calling to me begging me to fuck combustion for good. If I'm lucky hopefully that'll be early next week. I'll be reporting back with my first thoughts then. Wish me luck!
 

Grifo

Well-Known Member
Here is a pic of my little NV FlowerPot vape shrine. As you can see I am sporting the new stand which is exceptional. It keeps all the pieces I use in one place and it is very secure and stable. One other thing, I have been dying to use the NewVape box/stand as my special stash box to keep special things. Yes, it is expensive for a box but it has the NV logo on top and who do you know that has a box as cool as this NewVape Box?

I have been trying to come to terms with the fact I have became a fanboy. When I looked at myself in the mirror this morning I peered into my eyes and called myself a fanboy. After about thirty seconds of contemplation I realized this is true. I might as well enjoy it.

:cheers:

:peace:
where can i get that glass?
 

Grifo

Well-Known Member
It is an oldie but a goody from April 2011. I think it is one of the finest vape rigs ever made because it provides less diffusions than say the matrix vapes which is why it is better in my opinion.

You would be lucky to find one now. Every once in a while you will see one up for sale. I am super careful with it but as glass goes...it may crack me up someday. :ugh:

Mobius Reti Perc (mine is a bit newer with a bigger, nicer, base)

:whip:


Trust me on this @ataxian the difficulty is only a mirage.

If you can screw a bolt together you can figure out a FlowerPot. It's just new stuff. Seriously, I am not exaggerating the simplicity and I don't want to make light of that confused feeling, because I had it too, but like I said, the difficulty you are feeling is only a mirage.

Don't let it hold you back from enjoying the finest vape available. There are many complete lists in this thread and members that will even walk you through the process. Better yet just PM @NewVape710 and he will make sure you get off to the races easy peazy.

:peace:
dang it thats too expensive. Im too clumsy to own any expensive glass
 
Top Bottom