• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

The Mighty/Mighty+ by Storz & Bickel

vapviking

Old & In the Way
Hey I'm getting my new mighty tomorrow. should I overcharge it at first like I've done for other vapes? To condition the battery or what not? thanks.
I don't know about 'overcharge'! I don't think that's even a realistic possibility. Conditioning the battery isn't necessary.
It should arrive at about 80% or so. Put it on charger until full, which won't take very long. Then maybe run it up to full temp once or twice (empty chamber burn-off) just to be sure it's not going put out a weird smell or anything.
First bowl or two might have a slight "new vape" taste, but that will quickly fade away.
Enjoy!
 

namasteIII

Well-Known Member
Hey does it matter which side the mouthpiece is on? in other words when putting the cooling unit on is there a right way to do it or does either side work?

Also for the @rattchet V3 water pipe adaptor do I want to stop tightining at the little nubs or do I want to have those covered?
 
namasteIII,

MonkeyTime

Well-Known Member
Hey does it matter which side the mouthpiece is on? in other words when putting the cooling unit on is there a right way to do it or does either side work?

Also for the @rattchet V3 water pipe adaptor do I want to stop tightining at the little nubs or do I want to have those covered?
Either side is fine, I tend to put it MP right facing the screen day to day, and reverse it to cover the screen with my hand when discretion or dark is wanted.

Stop at the nubs. @Ratchett made it semi-firm to keep from creating pressure, which was a problem with other manufacturers. Going past those will start adding that pressure again.

Enjoy my friend!
 
Last edited:

cloudsosmoke

Well-Known Member
first part of your post

Hey does it matter which side the mouthpiece is on? in other words when putting the cooling unit on is there a right way to do it or does either side work?


if youre using it holding it in your hand - it changes the side the display faces

EDIT also see above comment


this one happens only rarely
..but is annoying - damaging smallest o-ring

at some point later on when youre cleaning c/u
youll push the two halves of the c/u back together
and try to slide the latch with the hologram on the top -it wont want to fully close

..dont make mistake of giving it a little extra push - the o-ring is trapped
it has slipped - you reopen it and re-seat the little o-ring


yes - enjoy
- its very dependable
 

Vapor4me

Well-Known Member
Hi folks,

I own a Mighty, but feel that the temps are a bit on the lover side for (melty of hard) concentrates, so I'm looking into an EVO to have at home.

Would it be a good complement to my Mighty, or would you recommend something else?

Thanks in advance!
 
Vapor4me,

6079Smith

Well-Known Member
Hi folks,

I own a Mighty, but feel that the temps are a bit on the lover side for (melty of hard) concentrates, so I'm looking into an EVO to have at home.

Would it be a good complement to my Mighty, or would you recommend something else?

Thanks in advance!
The Evo is good but the Flowerpot is great. It outshines the Evo with both flowers and concentrates in a more user friendly form factor. Simple to clean, near indestructible, option for Dnail inserts and you can one up with an enail controller for less cash

Just gave the old workhorse an ISO bath and new o-rings, she's in top form this morning :ko: Mighty fine way to start the day
 

nysuperscum

Well-Known Member
I've had my mighty for a couple of months now. Love it. Best vape Ive ever owned bar none. I'm off the expensive (here in NY) oils and using flower exclusively. Monthly expense is down 60-75%. It's already paid for itself. I highly highly recommend using the capsules. They keep it clean inside the heater and also extend the life of the mouthpieces. I ordered three extra vapor changers for when mine gets gunked up but haven't had to use any of them yet. Awesome vape. Great investment.

Edit-

The capsules are also great for keeping my abv all day until I get home and can store it properly without making a mess. The ABV from the mighty makes some awesome cannabutter. This adds even more value.
 
Last edited:

SiDankies

Well-Known Member
Has S&B made the plastic on these things more reliable yet? Im looking to get a new vape and I have always been very interested in the Mighty. Has there been any major or key changes over the years?
 
SiDankies,

passenger

is this thing on?
Has S&B made the plastic on these things more reliable yet? Im looking to get a new vape and I have always been very interested in the Mighty. Has there been any major or key changes over the years?
When you consider the first batch, it seemed to be common issue. These days, I hear no complaints anymore, so they got to have solved that. My unit dropped and dropped and all fine.
 

Vaporcussion

Well-Known Member
I own a Mighty, but feel that the temps are a bit on the lover side for (melty of hard) concentrates

I read that they are raising it from 410 to 430 if that helps.

Has S&B made the plastic on these things more reliable yet? Im looking to get a new vape and I have always been very interested in the Mighty. Has there been any major or key changes over the years?

Yes, improvements to the on/off button; I read they have a new (harder) body, that will hopefully help with broken fins, and separating in half. It now has boost mode, and a longer shutoff time.

As far as the Crafty claiming longer battery life now, I'm not sure if it's the same battery with better management. Anyone?
 
Vaporcussion,
  • Like
Reactions: Vapor4me

namasteIII

Well-Known Member
Has S&B made the plastic on these things more reliable yet? Im looking to get a new vape and I have always been very interested in the Mighty. Has there been any major or key changes over the years?

Probably, but it's a 300 dollar device your going to use a lot, so take care of it, don't throw it around, be mindful when putting the cooling unit on and off.. stronger plastic is way less important then treating your stuff well.
 
namasteIII,

MinnBobber

Well-Known Member
Read this will better my experience and allow for bigger hits. Is that correct? Or should i just save my money and stick with the stock cooling unit? https://delta3dstudios.com/mighty-v3-waterpipe-adapter/
.......................................................................
The main function of that is to allow easy connection to a water bubbler or hydratube, so the water can hydrate the vapor some and cool it some, allowing for bigger hits that are much easier to handle VS huge hits directly/without water.

His products are great but also check out the other adapter where you leave the stock cooling unit on and his silicone adapter slips onto the mouthpiece.
 
MinnBobber,

MileHighHuman

Well-Known Member
.......................................................................
The main function of that is to allow easy connection to a water bubbler or hydratube, so the water can hydrate the vapor some and cool it some, allowing for bigger hits that are much easier to handle VS huge hits directly/without water.

His products are great but also check out the other adapter where you leave the stock cooling unit on and his silicone adapter slips onto the mouthpiece.

Hey thanks! I linked that specific adapter since 420vapezone said it is his favorite one. Have you happened to compare them and if so what are your pros/cons? It would be used with a jhook as I'm just trying to get the best hits/performance from my Mighty that is possible.
 
MileHighHuman,

MinnBobber

Well-Known Member
For J-hook use, I'd go with:
It will fit on most vapes with a normal size mouthpiece so you can use it on MANY vapes.
IMG_7066__21106.1441280376.100.100.JPG
https://delta3dstudios.com/nearly-universal-vape-to-waterpipe-adapter-medium/

Plus, with it you leave the stock cooling unit on so vapor gets that cooling plus the J-hook cooling, allowing biggest/boldest hits if that's what you mean by "best hits/performance". Without water bubbler for humidifying and cooling vapor, I feel the stock cooling unit is best left in place for use with J-hook IMO
 
MinnBobber,

Aimless Ryan

Came to read about grinders; fucked combustion
I spent the last couple hours doing part of an experiment. With a full battery I turned on my Mighty at MAX temp. I kept it on until the battery was dead.

Here's what I did/what happened. After heating Mighty to MAX temp (410°F/210°C) and starting a stopwatch:
  • 22 minutes: Battery indicator 5/6. (Keep in mind, this number is inflated because I'm not stealing any heat by vaping.)
  • 46 minutes: Battery indicator 4/6.
  • 69 minutes: Battery indicator 3/6.
  • 92 minutes: Battery indicator 2/6.
  • 113 minutes: Battery indicator 1/6.
  • 134 minutes: Battery DEAD.
This data may not seem relevant, but I have other components in mind that will make it relevant. For example, I think the next part may be pulling 2-4 draws per minute from a full load at MAX temp until the battery is dead.

EDIT: Doing that.

With Mighty's battery fully charged I loaded .3 g of finely-ground herbs and heated to 410°F/210°C. Started stopwatch. Inhaled approximately 2-3 times per minute.
  • 18 minutes: Battery indicator 5/6.
  • 39 minutes: Battery indicator 4/6.
I'm not gonna spend another hour+ doing that. I think it's safe to project that if I had continued, Mighty's battery would have lasted about 115 minutes. Compared to 134 minutes with no inhaling.

I think the battery life will drop considerably once I limit my sessions to 10 minutes, then have to start each subsequent session with Mighty at room temperature.
 
Last edited:

Vaporcussion

Well-Known Member
I'm looking forward to your answer, @Vaporcussion, because I'll be damned if I can find this information anywhere. :hmm:

Hey @WildChild, I believe I read here on this thread! If not, maybe a recent Mighty video on youtube? or as part of an comparison video with another vape? Whether it's true or not remains to be seen...

Edit: That was on the S&B site, Found it, but it still says 410
https://www.storz-bickel.com/us/en/compare/

so I'm lost for now, sorry. Beyond that, Crafty also has a 300 second shutoff, will Mighty follow? And what about the extra battery life the Crafty is claiming? Hoping for a bump in battery life for both models....
 
Last edited:
Vaporcussion,

WildChild

Seeking My Shangri-La
Hey @WildChild, I believe I read here on this thread! If not, maybe a recent Mighty video on youtube? or as part of an comparison video with another vape? Whether it's true or not remains to be seen...

Edit: That was on the S&B site, Found it, but it still says 410
https://www.storz-bickel.com/us/en/compare/

so I'm lost for now, sorry. Beyond that, Crafty also has a 300 second shutoff, will Mighty follow? And what about the extra battery life the Crafty is claiming? Hoping for a bump in battery life for both models....
OK. Thank you for getting back to me. If they were raising the temperature, I was interested.

Appreciate your time.
 

Parentalcontrol2

Well-Known Member
Hey for thr dosing capsules with the liquid pad inside, am i supposed to add herbs on top of the pad and just close it? It seems like there isnt much room in there and unsure if im supposed to take out the pad.

Thanks
 
Parentalcontrol2,
Top Bottom