Discontinued The RBT Milaana (unregulated single 18650)

Status
Not open for further replies.

AJS

Calm Consistency
Sounds like what I experience as well, though my OG is likely even weaker being the beta I suggested be turned up for that initial batch, and my purpleheart has the turbulator with denser wood of course (you for your spalted is too early for the turb right? One of the first rare wooded Mi's if I recall correctly, also was taller than your V1? Mine is same size, OG was smaller though)
No turb. V1 and og same size. Spalted taller. Wood gets noticeably hotter but not bad at all. I got first batch of Spalted.

Is my v1 smaller than ur v1? I got very first batch of those too. Is ur purple smaller than my Spalted?
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
No turb. V1 and og same size. Spalted taller. Wood gets noticeably hotter but not bad at all. I got first batch of Spalted.

Is my v1 smaller than ur v1? I got very first batch of those too. Is ur purple smaller than my Spalted?

Ah spalted gets warm too, I guess when you got a lot of spalt, that conducts heat too. Forgot about that. Our V1s are probably the same size, mine has nonrecessed glass its that early/rough. My purpleheart is definitely smaller than your Spalted, you had a thicker bottom plate and maybe even more room under the button. I think the first rare woods we're like that with the thicker bases, then they got streamlined in between to an optimal size it seems
 

b0

Cloudy...
I kinda feel like a loser with only one Milaana. :cry:

J/K of course. In truth, I only need one. But one never knows what the future holds...

I love my Spalted and it's tuned hot as I like (shorter press of button and shorter time drawing, mostly used at low temps) but I have to admit that I'm reaaally curious about the turbulator. I'm quite happy just needing one stir or two depending of how hard I go with the trigger but will love to try one with a turbulator...

Wont be the first time having 2 versions of the same with my vapexhales tho
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I love my Spalted and it's tuned hot as I like (shorter press of button and shorter time drawing, mostly used at low temps) but I have to admit that I'm reaaally curious about the turbulator. I'm quite happy just needing one stir or two depending of how hard I go with the trigger but will love to try one with a turbulator...

Wont be the first time having 2 versions of the same with my vapexhales tho

Yeah I am curious what it would be like to have turbulator and hotter tuning like some of these other recent rare wooded Mi guys went with... May still need to get my own spalted as well lol
 

AJS

Calm Consistency
Yeah I am curious what it would be like to have turbulator and hotter tuning like some of these other recent rare wooded Mi guys went with... May still need to get my own spalted as well lol
Don't be greedy!! Lol jk. Greed the fuh up.
Using the concentration chamber (don't use much anymore .. I really should), my Spalted .. on the trigger side .. it would literally get too hot to touch with extended use. My hotter Mi .. stayed cool. Also less time on the trigger tho .. not just the more conductive nature of Spalted.
 

sickmanfraud

Well-Known Member
I have seen long stems and short stems. The Zion seems to have stems that are mid-length.

Does anyone know where mid-length stems are available?
 
sickmanfraud,
  • Like
Reactions: duff

cannabis.pro

aka 420EDC
Accessory Maker
I have seen long stems and short stems. The Zion seems to have stems that are mid-length.

Does anyone know where mid-length stems are available?
The Zion stem is ≈ 100mm and I've dubbed it Medium. 420EDC does sell Schott glass stems designed to be used with our glass TopHat Bullet SubChamber (not to be confused with other TopHats in stainless steel of varying origins). Our stems are designed to house the TopHat and the best way to deploy the TopHat is with unground material.

We have some plain Medium stems that aren't designed for the TopHat but as far as a screen, you are on your own. The RBT screen is too loose in the joint, the Chinese rimmed stainless steel TopHats fall right out, and the new RBT prototype stainless steel US Made TopHats fall right out too. We may reapproach this plain glass with non-Schott joints to see if we can get some internal constriction in which either of the RBT screens might work.
 

Vapetrees

Vaped Out
About to join the Milaana family. Just purchased a Walnut Milaana. Can't wait to get it, is there any way I could use a solo stem in it? I have a Solo stem that is my favorite as it is long and in the shape of a straw. When I use it in the solo the vapor is soooooo smooth.
Someone payed 295 for it. Now who was it? I couldn't do it even though I think it's a pretty damn good looking Milaana.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
About to join the Milaana family. Just purchased a Walnut Milaana. Can't wait to get it, is there any way I could use a solo stem in it? I have a Solo stem that is my favorite as it is long and in the shape of a straw. When I use it in the solo the vapor is soooooo smooth.

Nice, welcome to the club bud. I also love bent stems and there isn't yet an ideal one for the Milaana. However you can probably use your Solo bent stem if you use silicone to give it an airtight seal. I haven't tried this myself, though I should since I loved that stem too and saved mine when I sold my Solo/Air
 

Vapetrees

Vaped Out
Nice, welcome to the club bud. I also love bent stems and there isn't yet an ideal one for the Milaana. However you can probably use your Solo bent stem if you use silicone to give it an airtight seal. I haven't tried this myself, though I should since I loved that stem too and saved mine when I sold my Solo/Air
Thank you for the welcome. I think a good solution would be a glass reduced that would fit the solo stem. I have one but it doesn't seal it completely. I'll see if I can try some silicone. I have an old Mighty accessory that would go over the cooling unit, and I think that may work but I'll have to try it.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Thank you for the welcome. I think a good solution would be a glass reduced that would fit the solo stem. I have one but it doesn't seal it completely. I'll see if I can try some silicone. I have an old Mighty accessory that would go over the cooling unit, and I think that may work but I'll have to try it.

Yeah Ratchetts stuff should work, but a little piece of a clear tube might be enough to connect and not have the silicone in the airpath. That's what I was planning to try since I have some from Amazon, Alan also sells little pieces of it, since be likes to use the Milaana stems backwards sealing with silicone sleeve and then you get a GonG end. I haven't tried that yet either for some reason, I guess when the go to works so well it's easier to just forget it and enjoy
 

AJS

Calm Consistency
Yeah Ratchetts stuff should work, but a little piece of a clear tube might be enough to connect and not have the silicone in the airpath. That's what I was planning to try since I have some from Amazon, Alan also sells little pieces of it, since be likes to use the Milaana stems backwards sealing with silicone sleeve and then you get a GonG end. I haven't tried that yet either for some reason, I guess when the go to works so well it's easier to just forget it and enjoy
Still loving that new Milaana of yours compared to the old one?

About to join the Milaana family. Just purchased a Walnut Milaana. Can't wait to get it, is there any way I could use a solo stem in it? I have a Solo stem that is my favorite as it is long and in the shape of a straw. When I use it in the solo the vapor is soooooo smooth.

Someone payed 295 for it. Now who was it? I couldn't do it even though I think it's a pretty damn good looking Milaana.
Welcome! That Milaana sure was sexy ...

You'll love yours, excited to hear your thoughts! If I didn't have a Spalted I would've gotten a walnut. My splinter will be walnut ;). What color glass you get?
 

Vapetrees

Vaped Out
Yeah Ratchetts stuff should work, but a little piece of a clear tube might be enough to connect and not have the silicone in the airpath. That's what I was planning to try since I have some from Amazon, Alan also sells little pieces of it, since be likes to use the Milaana stems backwards sealing with silicone sleeve and then you get a GonG end. I haven't tried that yet either for some reason, I guess when the go to works so well it's easier to just forget it and enjoy
Thanks for the advice. I do have some of that as well from when I use to use it to mate my solo to a beaker. I'll try it out when I get it.
Still loving that new Milaana of yours compared to the old one?


Welcome! That Milaana sure was sexy ...

You'll love yours, excited to hear your thoughts! If I didn't have a Spalted I would've gotten a walnut. My splinter will be walnut ;). What color glass you get?
I am getting a long black stem and a short green one.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Still loving that new Milaana of yours compared to the old one?


Welcome! That Milaana sure was sexy ...

You'll love yours, excited to hear your thoughts! If I didn't have a Spalted I would've gotten a walnut. My splinter will be walnut ;). What color glass you get?

Yup yup, it is a more refined experience for sure. Not having to worry about holding the button even a millisecond too long is great, taste much more consistent and stable through a bowl with less stirring (I didn't need to in my old one or this one, I just prefer to do it for my extraction and vaping experience chasing those terps). The battery life is not a big deal at all, 4 bowls seems to be right if they're full standard 8-12 hitters, enough to handle most situations away from home and I've got plenty of batteries so easy to bring a spare if needed. I'm just charging and swapping a little more, but this has been all I am using pretty much (SBJ and Tubo saw a few bowls a couple nights, while oil pens cover convenience --- I had been rotating between Milaana and Tubo before this, with a little MVT and SBJ sprinkled in too). I'm also in for a walnut Splinter, I think, we'll see what it is in the end. Green glass and walnut is tight, reminds me of original green glass Ziggy Sawdust my first beta Zion, but blue is great too. I really like my amber too, and can't go wrong with black either!
 

dog_leash

Well-Known Member
About to join the Milaana family. Just purchased a Walnut Milaana. Can't wait to get it, is there any way I could use a solo stem in it? I have a Solo stem that is my favorite as it is long and in the shape of a straw. When I use it in the solo the vapor is soooooo smooth.

Someone payed 295 for it. Now who was it? I couldn't do it even though I think it's a pretty damn good looking Milaana.

I'll post pictures when it shows up
 

pakalolo

Toolbag v1.1 (candidate)
Staff member
Lol please spare me having to watch 1h of this annoying character, what's the verdict?

:)

This post has just been reported as Not Nice. Apparently, 11 other members agreed and liked it.

Let me remind you and the 11 others about our rules:

Be Nice
  • All members must be treated in a respectful and adult manner. All members should respect and adhere to the promotion of harmony within the community. Do not attempt to disrupt the community in any way.
  • Liking flame posts by clicking the corresponding “Like” button is strongly discouraged and may result in a warning point depending on the situation.
I'm not handing out 12 warning points, although I could. @VCBud is a member here now and deserves the same respect you are supposed to show all of us. I don't care whether you like him or his reviews, but as long as he's a member then comments like this (or liking them) make you likely to get a warning point.

Thanks for your cooperation in keeping peace and harmony on FC.
 

VCBud

Manufacturer
Manufacturer
@pakalolo Respect :bowdown:

Love my Milaana, nothing bad to say about it. Simple, beautiful, pure - glad I bought one.

zsLdgHq.jpg
 

AJS

Calm Consistency
@pakalolo Respect :bowdown:

Love my Milaana, nothing bad to say about it. Simple, beautiful, pure - glad I bought one.

zsLdgHq.jpg
Glad to have you on the Milaana train man. Really is a fun device. Hopefully with enough time people won't see you as the critic and will see you as another member. Sure it won't be long :)

As I've stated about walnut and Emerald, looks amazing together. Awesome choice. Especially with how it nearly conceals the copper by blending in so well. The finish on yours is awesome, love the grains.

Again, welcome to Milanalanaland

Edit: @duff said it best. Doesn't matter who anyone is, we're all friends as soon as they touch this thread :) the more friends, the better.
 

cybrguy

Putin is a War Criminal
@pakalolo Respect :bowdown:

Love my Milaana, nothing bad to say about it. Simple, beautiful, pure - glad I bought one.

zsLdgHq.jpg
Hey, Pak is absolutely right, of course. And let me apologize for my less than generous take on your hour long multi review. Your review was the first time I had heard of the MV1. Your input will be appreciated here.

Welcome to FC. And what a pretty Milaana you have... :nod:
 
Status
Not open for further replies.
Top Bottom