Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

Cannabis-Hardware-Ed

Seeking Higher Ground
Manufacturer
nothing's changed with the showerhead

posting concepts for discussion only there's no current plans to make any of the below items.

I'd like to get feedback from customers using the showerhead prior to creating the party bowl to determine how large of bowl it can handle.


party_bowl-1.jpg
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
I saw people posting about timers and have a question. Would anyone worry about using a 14awg (rated to carry 125V at 15A) extension cable with their controller/pid and a timer? 12awg shouldn't be necessary should it? Not unless you have other stuff on there too? I would need to use one to get the switch somewhere I could press it without crawling under a dresser.

I saw a lot of reviews on amazon with pictures of very popular timers that literally caught on fire and it's made me want to be really cautious. I don't want to ironically burn my house down with my fire safety purchase.

533! BetchabygollyWOW :)
It seems weird to me too, I was waaaay higher before I reshaped my coil.
 

EmDeemo

ACCOUNT INACTIVE
So how will the adjustable screen levels work? Here, with one side open you can easily move screen.
Will screens be wire mesh with rim around edge or wire screens with raw wire edges or ???


party_bowl-1.jpg

Levels, Jerry. Levels.


Out of interest, @NewVape710 , whats the thinking behind having the party bowls airpath so much thinner than the bowl itself? If that bowl were full, that hole might be a bottleneck pretty quickly.
 

Cannabis-Hardware-Ed

Seeking Higher Ground
Manufacturer
Last edited:

Cannabis-Hardware-Ed

Seeking Higher Ground
Manufacturer
Levels, Jerry. Levels.


Out of interest, @NewVape710 , whats the thinking behind having the party bowls airpath so much thinner than the bowl itself? If that bowl were full, that hole might be a bottleneck pretty quickly.


it does look small in this model. I'll open it up tomorrow. thanks.

i enjoyed the video
 

Tommy10

Well-Known Member
270 usd posted for the second hand set up, think it's a pretty complete set up but might sus this a bit more. Still actually no full idea of how the FP works. Might have to get right into their website only like 10 pages into this and it grows faster than I can read Like tryna keep up with the Mi thread except I was pre ordered for ages.
All I know is, I wanna vape flower like my supreme but plugged in. I wanna get what I need from FP but I am also broke so wanna get what I can from China. Will order once I work it all out, looks very exciting.
Don't mind ordering bits and pieces to build with from China later but would like to order everything I need from NewVape at once due to USA shipping. Normally I'm the type to just select one of everything but I need to learn to spend money better, and I don't often have as much of it Also only wanting flower makes a lot of the items in the store unneeded.
 

lazylathe

Almost there...
Orders are usually accepted/dispatched quickly?

My order from yesterday afternoon hasn't been touched yet.

Also, will my rig (https://m.dhgate.com/product/8-7-inch-glass-recycler-amazing-vortex-recycler/216222776.html#pd-019) be able to support the flowerpot without being too top heavy and tipping over?

That rig will be perfect for the FP!
May strip a bit of flavor when doing flower but perfect for oil!!

@NewVape710 and anyone else who may know this!

Will the new 20mm Showerhead fit onto their regular bowls?
I have the 18/14 bowl and hope that it fits this bowl as i have a 20mm coil!
 
Last edited by a moderator:
lazylathe,
  • Like
Reactions: muunch

Cannabis-Hardware-Ed

Seeking Higher Ground
Manufacturer
That rig will be perfect for the FP!
May strip a bit of flavor when doing flower but perfect for oil!!

@NewVape710 and anyone else who may know this!

Will the new 20mm Showerhead fit onto their regular bowls?
I have the 18/14 bowl and hope that it fits this bowl as i have a 20mm coil!

all current and previous bowls are all supported by the showerhead.

Here's the 14/18 female bowl for the recycler rig.

https://www.newvape.com/flowerpot-female-body-with-handle-twax-twaxvapor
 

ichibaneye

Vapriot, Traveler & Vaporizer/ing lover!
nothing's changed with the showerhead

posting concepts for discussion only there's no current plans to make any of the below items.

I'd like to get feedback from customers using the showerhead prior to creating the party bowl to determine how large of bowl it can handle.


party_bowl-1.jpg

Addressing the size concerns. I'd say the sky's the limit at this point in time as far as the overall larger size.

I'll just be cutting my teeth here for the first time with the FP gear this coming Saturday. Oh and get this guys n gals, and another chance to showcase NV's baddassery to another group of friends while watching Mayweather n McGregor fight it out.

Anyways back to my point. After a bit of usage and testing out the current gear [I basically plan on owning it all, color my crazy I'll embrace it!] I'll have something more to build from concerning size.

Believe you and me, I've got the two step engaged and I'm currently ready to mash on the gas! 3...2...1.....let's do this!

I too like the better look of the overall flower pot design with the silicone ring. It just looks like it's meant to be part of the bits and pieces and doesn't look out of place.

I think handles are great but looks wise it just doesn't work in my head. But that's personal preference of course. However speaking to my previous point, the handle just doesn't flow.

I'm also curious if any of the current owners have accidentally snagged on the handle, or any other mishaps while in use?I'm just curious is all.

I've also not heard any other feedback from the other members that had the bending handle issues. Was this a design mistake or just user error? If so, has this been addressed yet?

Now for the Shower Cap [wink, wink, nudge, nudge] :tup: I'd say start off with just one hole. Then test it out and if the fuction is great, leave it. If not move up a hole and so on.

Just don't make them to large. This just makes for having to carb cap a carb cap to adjust the airflow. I personally would rather use mostly my own draw to compensate for this. Thoughts anyone?

Lastly, when you do decide to drill that hole into the carb cap consider these things for me if you would sir. First how about instead of a straight through hole, try drilling it at an angle.

I suggest this because hard angles with airflow create unneeded extra turbulence and fluctuations in consistency and flow rates.

Picture a matched and ported head. It's all about better angles and smoother flowing air to maximize performance. Hopefully that makes sense to you.

This angle I believe would be very beneficial for a even smoother capping experience and better for moving around the larger dabs too.

Perhaps if this works better maybe even a LolliCap 2.0 down the road. :cool: Hehehe, I'm just letting it roll of the top is all. I'm currently tickled, tucked, and tantalized with the current version.

So how will the adjustable screen levels work? Here, with one side open you can easily move screen.
Will screens be wire mesh with rim around edge or wire screens with raw wire edges or ???


party_bowl-1.jpg

Simple really, find something smaller and poke it up through the bottom to dislodge the screen. Trust me this works perfectly and easily my friend.

Yes the raw exposed ends on screens work just fine for fitting into channels. I use them in my EQ bowl channel and it's even glass. So the metal on metal should fit even better I would think.

I'm also sure that NV's tolerances are going to be spot on. So I wouldn't worry about them popping out or anything. Cheers! :cheers:
 
Last edited:

muunch

hotboxing the cockpit
I went with a 18mm male body, as I'll just use a F/F adapter on that male recycler instead of using a dropdown. I'm not one to really go for reclaim anyhow.

I do just hope it's heavy/wide enough to support the FP!

I'm also hoping for a weekend delivery! Still pending though after 24hrs, and my card hasn't even been charged. I sent a support ticket because it did seem like I got an error when trying to pay, but nothing so far.
 

Tommy10

Well-Known Member
Doesn't seem to be much cheaper to get a controller from China, but will be easier to get a 240v and an Aussie plug. Might order that some coil then start to work out what to order from newvape. Don't want to be running a US plug 110v I know that.
 
Tommy10,
  • Like
Reactions: grokit

Tommy10

Well-Known Member
Just tried to fill my cart with one of each of what I would need, minus the controller and coil if I can get them together and hopefully the right plug and voltage. Be fucked if I can work it work even with the FAQ What's flower what's dab what's needed what's the same purpose but duplicated. 25mm dishes I think this is beyond my comprehension haha.

I got a
14mm male body (that will go into a female bong?)
Lolliecap
Shower head
Shower head cool nut

Other than 20mm coil and controller will I need anything else to vape bud?
 
Tommy10,

Hogni

Honi soit qui mal y pense
The Lollicap doesn't fit the showerhead just the regular and the wrapped Combos.

Rude design of the new Showerhead cap from NewVape710 above.

The 14mm male will go into a 14mm female for sure - or into a 18->14mm reducer
 
Hogni,
  • Like
Reactions: steama

Tommy10

Well-Known Member
Oh god, and from what I understand I still need the bowl bit also? Is there another carb cap for the shower head?
 
Tommy10,
  • Like
Reactions: steama

Hogni

Honi soit qui mal y pense
As I said there is none up to now. But I'm sure there will be one the next two weeks as far as I know the work of Edwyn :wave:

But if you should intend to use it for flowers only you don't need one actually.
 

Hogni

Honi soit qui mal y pense
Thanks! But it isn't listed at the overview site!? Perhaps Edwyn shoud add it there too?

Remains the open question why there is no one with a handle!?

"hah choo ah pen kee"?? Hawaian??
 
Top Bottom