• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Aimless Ryan

Came to read about grinders; fucked combustion
You've basically got it. The only change I would make is to spin it more, as even heating is key to the best hits. Here is George his own self describing the process.

Wish I could. My manual dexterity is so bad I'm surprised I can even use a Vapcap. I'm very surprised I haven't already broken it or burned myself with it. It's probably because I'm extra careful with it. Which means I have to spin it slowly.
 

virtualpurple

Well-Known Member
Wish I could. My manual dexterity is so bad I'm surprised I can even use a Vapcap. I'm very surprised I haven't already broken it or burned myself with it. It's probably because I'm extra careful with it. Which means I have to spin it slowly.

@Aimless Ryan i think of you when I use my induction heater for the vapcap. @Pipes produces them and they are great. This takes the need for spinning out of the equation. If you are able to set the vapcap into a door tube and apply a little downward pressure then you should do just fine. Best of all, you won't have to worry about fiddling with butane and spinning the cap.

Check out the thread in the DIY section or pm me if you have any questions.
 

Doktor Dub

Well-Known Member
Hi guys!!

Today was a happy day for me and a lot of people around me...

My green package arrived... And it looked like Christmas in july!! :lol:

I got an M for me, a beautiful Bocote stash for a friend who was hooked during the 420 sale, and a Cocobolo Nonavong stem to upgrade my Glassy (which I am fucking loving!!)...

And also... 8 Ms for friends.... :rofl:

1Qa2nmd.jpg


So if you happen to come to Spain this summer and it gets foggy and cloudy... You know who to blame!! :cool::brow:

I want to thank George @VapCap for the sale, there was some people over here that just couldn't afford your vapes and thanks to your offer now their lives will change for better... Just as you helped change mine! :clap::bowdown:

I could handle 3 of them today, and they are already loving them!! :love:

BTW, the package only took 19 days to arrive to Spain since I ordered... considering the giant sale I think that was incredibly fast! Kudos to the Dynavap team for the hard work!!! :rockon:

Hope everyone over here is enjoying life... and if you are still waiting for your turn, be patient... You will end up really satisfied ;)

Peace!!

You seem to be a good friend.... showing the Vapcap to people is great, i think it s the easiest Vape to like for smokers...

Vapcappers Europe! Vapcappers worldwide!

Have a nice Day!
 

Lorsch

Member
Hey fellows,

Sorry for my bad english, i am from germany ;)

I used a lot of vapes before, at first a flight box which didnt work very well. After that a glass
vaponic, it was ok. But very difficult in handling, and complete glas. After that i bought a Flowemate 5.0, i loved it, but i changed it to a vapman. I only used the vapman for a year now and it was my favorite toy. Easy to use, u have to learn it a bit. Easy to clean and you can put it hot away because it stand on wood only.

Few days ago, i had a good day and i thought, i could gift me a new vaporizer. I found the vapcap M in a very
good shop from berlin. Super fast delivery and mail support.

I cleaned it a little bit and just had to test it. Single torch flame, and waitet for the click.
Wow so much vape und flavor. I was directly in love! A friend of me who was with me will order one too.

I liked the dynastash also, but i thought 50€ is a lot of money even for such nice work, so i will make my own one. I cant order the magnet from the US shop, what kind of magnet do i need? Axial ones?
I have some block shaped small one, but the only attract at the edges.


Greetings
 

stark1

Lonesome Planet
My "newbe" question to the nice 'Cats here, is there a code, why are some packages purple, while most are green.

My mail lady brought me a purple one last time although I had said it would be green. She had looked for
a glimpse of green in her sorting.....
 
stark1,
  • Like
Reactions: Squiby

Doktor Dub

Well-Known Member
My "newbe" question to the nice 'Cats here, is there a code, why are some packages purple, while most are green.

My mail lady brought me a purple one last time although I had said it would be green. She had looked for
a glimpse of green in her sorting.....

There is no code, it s just random. Green envelopes are the "classic" ones. If you want a neutral envelope, perhaps if you are worried that the coloured may be stolen or gets too much attention you can contact Dynavap.
 

Doktor Dub

Well-Known Member
Hey fellows,

Sorry for my bad english, i am from germany ;)

I used a lot of vapes before, at first a flight box which didnt work very well. After that a glass
vaponic, it was ok. But very difficult in handling, and complete glas. After that i bought a Flowemate 5.0, i loved it, but i changed it to a vapman. I only used the vapman for a year now and it was my favorite toy. Easy to use, u have to learn it a bit. Easy to clean and you can put it hot away because it stand on wood only.

Few days ago, i had a good day and i thought, i could gift me a new vaporizer. I found the vapcap M in a very
good shop from berlin. Super fast delivery and mail support.

I cleaned it a little bit and just had to test it. Single torch flame, and waitet for the click.
Wow so much vape und flavor. I was directly in love! A friend of me who was with me will order one too.

I liked the dynastash also, but i thought 50€ is a lot of money even for such nice work, so i will make my own one. I cant order the magnet from the US shop, what kind of magnet do i need? Axial ones?
I have some block shaped small one, but the only attract at the edges.


Greetings

There was quite a bit of discussion about magnets in this thread. I found a cheap alternative in Germany, have a look here:

http://fuckcombustion.com/threads/dynavap-vapcap.18853/page-650#post-1130842

Have a nice day and enjoy your Vapcap, if you build a stash yourself don t forget to post pictures here so i can get on your nerves to build me one also :D
 

The Beagle

Bubbles & Bags
I read somewhere awhile back that the cheap lighter torches use the same internal components as expensive lighter torches. I could be wrong but my experience with torch lighters is telling it might be true.

Same for me, I've had fancy torches dying quickly and cheap stuff lasting for years. I also believe that the quality of butane isn't as important as a lot of people thinks. For me the best combo so far has been Honest single flame and HongJing triples with the very cheap Flame Club butane that I can find at my local chinese market.

Any one else out there use their off hand to rotate?

I can turn it with both but I do it with my off hand as I prefer to operate the torch with my dominant one.
 

Summer

Long Island, NY
There is no code, it s just random. Green envelopes are the "classic" ones. If you want a neutral envelope, perhaps if you are worried that the coloured may be stolen or gets too much attention you can contact Dynavap.

Do to my current living situation, I wasn't too sure about what to expect from DV's packaging, so I requested discrete packaging. DV mailed it out in the same type of plastic bubble envelopes they use, but the pkg. is white. Now I see that I don't have to request discrete pkg. for future orders.
 

Maryland Vapor

Well-Known Member
Just joined the VapCap family on the Friday after the 4th of july, and I already know that I wish that I had found this vape first.

30+ years using a one hitter and dug out 95+% of the time. Quit smoking cigarettes(2+ PAD) by vaping, then realized that I could fuckcombustion here as well.

Started with a Vapor Genie pipe, worked well enough to start, great proof of concept, but never completely figured it out. Probably 15% combustion. Wife had issues with it as well, and wanted the convenience of a battery powered vape, and I was thinking of something a bit ...sturdier and more stealthy... for my outdoorsy adventures. I started thinking about the VG coil, but made do with the OGVG.

Enter the Flowermate VT1.0. Bottom dial, integrated battery, and again, worked well enough. The wife was mostly happy, unless the battery died on her. Soooo...(has now been gifted forward to the oldest stepson, so HE can try and fuckcombustion. He loves the vape, but still smokes too)

This years 4/20 sale comes along, and here comes a Xmax V2. Interchangeable 18650 batteries that I already had, same load size as last vape(which I always thought was a bit large, the wife not so much), waterpipe mouthpiece (meaning actually holds water), and I always did the work....lol... This is now gonna be the wife's backup, and also the "abv killer ", meaning it will be the high temp extractor for any light green Vapcap abv...

Now, here comes the Vapcap into my line-of-sight, which, honestly, I have coveted since I first saw it, but the OG is made of glass, and the omni and woodies were slightly above my pay grade. So, I kept watching, reading, and researching this whole time, and now.... here comes the M. ...

Ta Daaaaaaaahhhhhh.... ding ding ding, winner winner, chicken dinner...

Not only is my search, but also my wife's search, is over. Welcome back to the basics!
 

Gigsabits53

Well-Known Member
Ok I think I have finally got this vape (M) mastered. I have been adding it to my rotation more and more. Woke up this morning and did two bowls back to back. I should say that the herb I have right now is what I would call top tier.

What a fantastic high! This little device is wonderful ! I love the ritual of it but I also have a skeletor from @Pipes on its way. This will be for those lazy times, and believe me I have lots of those lol, where I wont need any dexterity and can still enjoy my vapcap.

Many thanks to all the knowledgeable vapcappers (is that a word? should be if not) in here!! This thread is almost as good as the vape. I dont know about others but this site has helped me so much since I joined. My life is truly better because of all of you here at FC.

And yes, I'm high.....all that is still true. Thank you!!!:love:
 

Dynalowrider

Well-Known Member
"Many thanks to all the knowledgeable vapcappers (is that a word? should be if not) in here!! This thread is almost as good as the vape. I dont know about others but this site has helped me so much since I joined. My life is truly better because of all of you here at FC."

Gigsabits53, If I could give multiple likes for this paragraphs. This goes double for me. I couldn't have said it better myself. Doc
 

Smokey McVape

Well-Known Member
I've been enjoying concentrates with my Vapcap lately. My usual material had been flowers and hash. But after reading of @herbivore21 s love of concentrates and how convenient and efficient the Vapcap rose to the challenge, I dove right in.

I started with a S&B concentrate pad, a pair of flat nosed pliers, sharp side cutters and of course my beloved Omnivap.
SM9IoMV.jpg


I compressed the sides of the disk shaped pad until it became a cylinder shape with the diameter of the Omni herb chamber.
C0qLWKg.jpg


The cylinder ended up being about twice as long as the chamber is deep. So I cut it in half.
C2FyLh1.jpg


One pad is stuffed into the chamber and the other is put away for another day.
1RcYLBo.jpg


Top the pad with the concentrate of choice - here we have Girl Scout Cookie wax - and you have yourself set up in tokes for a good long while.

I find this super convenient. I'll take my Omni out while I work around outside. Every couple of hours I heat the Omni past the click for 2-3 seconds, take a nice full thick toke and carry on with hauling hay, weeding, planting, whatever. Yesterday I spent the day clearing tent caterpillars from the fruit trees and squishing them mercilessly on a rock. Yuck! I hate those bastards!

The concentrate lasts all day long. One toke at a time. An all day sucker. It's fantastic!
@Squiby - Does this setup work well with bubble hash or is there a better way? Thanks in advance.
 
Smokey McVape,
  • Like
Reactions: steama

Kermitt

Well-Known Member

Chose

Well-Known Member
:wave::love:
I'll never be accused of being a genius.:doh: I meant to post this here but posted it the heater thread instead...you know...because I was high. It's a bit more applicable here:

I've had some form of vapcap for well over a year and have used one or another almost daily for that long:rockon:

I just realized that as a right handed person who, in general, treats his left hand as a dumb mirror image of its opposing appendage or to simply hold things that my right hand works on, that I absolutely can't spin my vapcap in my right hand. I've tried. Many times. It just doesn't feel right. Light in right, spinning vapcap in left-that's just how I do it. So weird.
Any one else out there use their off hand to rotate? Curious weirdo wants to know:wave:
Same here
Wired isn't it
If I use my right hand to spin it's all clumsy and like I'm not in controll of it (this is how I dropped my OG )but in my left hand I can spin it REALY smooth and altar fast like some kind of basic instinct without even thinking about it
Very odd
But I like it :mental:
 
Last edited:

stardustsailor

Well-Known Member
Accessory Maker
Just finished with my first DIY titanium body ...

Well,ain;t exactly "perfect" but considering that the machining was done
with primitive tools and under the peaking effects of ~100 ugrams of diethylamide of lysergic acid ..
Love the garage extreme sports !!!

Anyway ,I think ok ,it is rather good -at least the way(s) I see it right now !





Currently being tested while listening to this ultra- shoothing summer tune :

Cheers !
 

darbarikanada

Well-Known Member
Does this setup work well with bubble hash or is there a better way?

bubble hash can be anything from dry powder to goo, so the technique varies. if it's too powder-y, you can use heat (low iron on parchment folded over a little hash), which turns the hash into something like the texture of a very thin cookie: crumbly but it holds together. little chips of this work great in the vapcap, even without pads or filters. my experience so far is that the general idea is 'the thinner the better' - it probably maximizes the surface area that gets heated.
 

FabulatorPoeta

Where has the time gone?
Well said! As with most better vapes, not hard to get vapor right out of the box (or green envelope in this case). But, takes a bit of practice and experience to find your groove and your own tech. As I progress with such things, I often go back in a thread (for whatever vape) and find things others have suggested that seem to go well with what I'm figuring out for myself.

@flotntoke Well said also. Same for me.
 

FabulatorPoeta

Where has the time gone?
Congratulations @phattpiggie! I hope you broke out your triple barrel Vapcap to celebrate. :spliff:

To mark PPs first year in carving the sexiest stems for our beloved Vapcaps, I thought that I might share my latest PP Stem acquisitions.

Honeybee Acrylic/Blackwood w/exposed condenser.
hVk439S.jpg


Honeybee Acrylic/Blackwood.
soIwTe2.jpg


Tulipwood Twist with integrated mouthpiece.
PjEDt3d.jpg


Harry Potter Paduak Twist. It's a beautiful deep dark burgundy.
Nnm2qxu.jpg


Blackwood Telescopic Twist
8M90UF0.jpg


And of course the obligatory family pic.
zMrucaV.jpg
@Squiby Your garden is amazing and this curved polished wood plate inspiring to say the least. Summer time... and the living is easy!
 
Top Bottom