Been Vapin
Fringe Class
I went with the 30mm Liger. Do you have a 30mm and a 20mm?
CCA Liger banger V3.0
- Thread starter mrbonsai420
- Start date
I went with the 30mm Liger. Do you have a 30mm and a 20mm?
YabbaDABBAdo
Well-Known Member
Yea the new hurrricane cap with 1 hole and the 30mm, it's happend to me 5/6 times now since Saturday I am a constant user yet I keep my shit clean I wipe the cap after every few hit and qitp the hell outta it and have cleaned it 3 times now since sat when I got it , if my comment came off wrong my apologies, they have been working with me pretty well some missed messages due to time zone and life but , I have sent them pics and told them it seals up like it was welded shut and I had to take he whole nail off while still warm and knock the hell outta it on the table Enough to gouge a wooden table through a goo mat for it to break free,tried heat treat ISO ect nothing they stated from one of the pics the intake tube might stick out a little bit just far enough to catch the cap but if that were the case I think it would gouge the cap from me banging it and it's smooth. I'm not sure what the problem is
Been Vapin
Fringe Class
Can someone provide me with the inside and outside diameter for a 30mm Liger? Thought they were posted, but couldn't find the dimensions. Edit found it
I found a glass blower on IG willing to try to make custom 30mm Liger carb caps.
Any suggestions?
I found a glass blower on IG willing to try to make custom 30mm Liger carb caps.
Any suggestions?
Last edited:
lazylightning
It's an obsession but it's pleasin'
I have just the 20mm Liger. Need a Riptide for your 30mm?
Been Vapin
Fringe Class
I already have a Riptide, and the 30mm has not been shipped yet
YabbaDABBAdo
Well-Known Member
Does the riptide work well with the 30? If so how well does it work air flow wise?
I've been trying to find a good glass cap does anyone know if the terp tuner xl fits ?
Been Vapin
Fringe Class
I gave the glassblower the 30mm Liger dimensions posted in this thread. He said he could make a custom clear cap for (around)$50 or $70 for colored.
It would be this style low profile bubble cap built for a 30mm Liger. Anyone interested or have suggestions? I'm willing buy one and report back.
It would be this style low profile bubble cap built for a 30mm Liger. Anyone interested or have suggestions? I'm willing buy one and report back.
Last edited:
YabbaDABBAdo
Well-Known Member
I gave the glassblower the 30mm Liger dimensions posted in this thread. He said he could make a custom clear cap for (around)$50 or $70 for colored.
It would be this style low profile bubble cap built for a 30mm Liger. Anyone interested or have suggestions? I'm willing buy one and report back.
Yea I would be interested
YabbaDABBAdo
Well-Known Member
Yes I would be interested like to see some more pics sorry for the messed,up post on my phone hit a button by mistake
Been Vapin
Fringe Class
Marihuana
Iso Tensei
Very aesthetically pleasing. I feel like the recessed, bottlenecked design will make for great function on a beast like the 30mm. Also, I have a feeling the inner diameter of the spout on the bottom is a little wide, which could squander its potential function by being too flowy. One thing I'm not sure about is whether the tube that extends into the bucket should be at a slight angle or not. I'm also unsure of whether the length of the spout makes a difference... Either way, you've got my attention. Does this glassblower ever incorporate opal in their art?
Gn0sis
Well-Known Member
I gave the glassblower the 30mm Liger dimensions posted in this thread. He said he could make a custom clear cap for (around)$50 or $70 for colored.
It would be this style low profile bubble cap built for a 30mm Liger. Anyone interested or have suggestions? I'm willing buy one and report back.
diameter should be 38 - 40mm at the widest point.
spout should be no longer than 1-2mm
gonna have to go thru a bit of trial and error with getting the airflow just right. possible that intake hole should be a bit narrower.
Kalikron
Well-Known Member
So I went ahead and placed a pre-order for the new material/dab surface...obsidian insert!! I just ordered today; so it's up for sale on their site now if anyone wants one before they're sold out 
I can't wait to try the new material with a tier 1 polish from day 1....I'll definitely report back when I receive it. Now to start waiting patiently for the first August/September drop!
I can't wait to try the new material with a tier 1 polish from day 1....I'll definitely report back when I receive it. Now to start waiting patiently for the first August/September drop!
Last edited:
nickmo
Well-Known Member
Just did the same! Can't wait!
I'm in for sure. I'd order tomorrow if the design was done. I don't mind restricting the airflow with my finger a bit, as long as the spout is narrow enough to generate some pressure.
Hogni
Honi soit qui mal y pense
Would be nice if @mrbonsai420 could give some infos about and maybe a first review on it!?
Should be the longer announced "new ceramic" insert?
Ahh, they've deleted pics of the carb caps on their site. First step to an update to the new designs?
Been Vapin
Fringe Class
@Wierdeerglass told me last night he will make the 30mm low profile bubble caps designed for the Liger.
If are interested in a custom 30mm Liger carb cap email wierdeer@gmail.com. Or contact him on IG @wierdeerglass
ensabbahnur
Hash Vacuum
Put myself down for one of the 20mm obsidians, choked a bit on the price but technology right? Pretty much over the 30mm until a proper cap emerges that can get it to chug anywhere near the 20s I've tried OG Terptrunk, new terptrunk, storm cell 3 and hurricane 3, gordo riptide, local tahoe blower mille and the mobius directional and they all barely work on the 30 with the storm cell being sadly the best so far and the mobius being by far the best for the 20s (much much better than the riptide on the 20, which is prolly the second best I've found for the 20) the bubbles people are commissioning look good but I'm almost certain the final air spout needs to be way shorter for the 30mm or it'll bottom out in the dish, maybe just a straight hole with no spout neck as the bubble design will be directional even without a spout
Baron23
Well-Known Member
I like that very much and if made to fit a 20 mm Liger I would certainly sign up to buy one.Here is another pic
I agree that output hole on a cap needs to be kind of smallish in order to get the pressure drop we are looking for but I have also found with this type of cap that its pretty simple to feather the intake (carb hole if you will) on top with your finger (I do this a bit with the Chadbro bubble cap I have....least I think its the Chadbro...so many caps, so little memory LOL).
As far as angle, not needed in my experience...that's why its a hemisphere...the whole thing angles. I have a couple of different bubble style caps and it works very well, IMO.
Monsoon
Well-Known Member
He's been MIA, have a feeling maybe he was the guy they hired for support (after doing it pro-bono).
Looks like I'm pre-ordering the Obsidian now...