Squiby
Well-Known Member
I imagine it would. The ti tips evolved from one with similar grooves to the SS M tip to the deep and many channeled version the Ti tip is today. The difference is significant.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Hm...Ok,not that significant,at least for the M.
Maybe that's the reason why George designed the M tip without 'em afterall.
Still this is my opinion ,mainly based upon my lungs capabilities and restrictions.
Moreover,if you ask me, I prefer the original M tip over the mod .
But I would also prefer a body w/o a carb .
Edit: I 've found though something that makes a difference ,
but not resistance-wise.
Preheating the M ,before the first main session (click to click).
Do a dry run first -if possible of course-after the cool down click load the M and then proceed further.
Makes a whole lotta difference !
Edit#2 : Black leather jackets and shinny steel.
Maybe too 80's .
Still holds the carb hermetically closed,
while making holding and rolling somewhat easier!
Cheers.
Last edited:
More European options everybody:
https://lacentralevapeur.com/20-vaporisateur#/fabricant-dynavap_vaporizer
They have lot of different stuff for very good prices. And they have a 4/20 sale on for 15% off, I think over the weekend.
https://lacentralevapeur.com/20-vaporisateur#/fabricant-dynavap_vaporizer
They have lot of different stuff for very good prices. And they have a 4/20 sale on for 15% off, I think over the weekend.
PeteSeattle
Well-Known Member
Sorry to interrupt ...
Had a great get together with George in Seattle the day before Dope Cup. Yes I've been dropping hints but after meeting up with George I got the Okay to post. So if any VapCapers are in WA. I will be there as well as George. Would love to meet others on this forum.
Have a great rest of the weekend! I hope to see anyone of you all at the Dope Cup with George and DynaVap.
Cheers!
Edit: Link to event http://dopecup.dopemagazine.com/
Had a great get together with George in Seattle the day before Dope Cup. Yes I've been dropping hints but after meeting up with George I got the Okay to post. So if any VapCapers are in WA. I will be there as well as George. Would love to meet others on this forum.
Have a great rest of the weekend! I hope to see anyone of you all at the Dope Cup with George and DynaVap.
Cheers!
Edit: Link to event http://dopecup.dopemagazine.com/
Last edited:
Puffers
Micro-Climate Mastermind
Looks like my package touched down!!! I should be able to grab it in a few hours I think. :fingerscrossed:
Is that a Begleri? Very cool if so! One of my fingers is still sporting a bruise from a pretty heavy one I made to practice finger rolls with
Edit: @VanCough
Ya it's a skill toy similar to butterfly knife, pen spinning, etc.
Lot of fun and good way to keep my hands busy when I am bored or thinking. Once you get used to certain motions it's kinda automatic. I mess with one hanging out at my vape station a lot. Made some for my boys and they have been having fun competing with them. Some paracord and scrap sockets and nuts you can make a lifetime supply for like $5 lol
Hm...Ok,not that significant,at least for the M.
Maybe that's the reason why George designed the M tip without 'em afterall.
Still this is my opinion ,mainly based upon my lungs capabilities and restrictions.
Moreover,if you ask me, I prefer the original M tip over the mod .
But I would also prefer a body w/o a carb .
Edit: I 've found though something that makes a difference ,
but not resistance-wise.
Preheating the M ,before the first main session (click to click).
Do a dry run first -if possible of course-after the cool down click load the M and then proceed further.
Makes a whole lotta difference !
Edit#2 : Black leather jackets and shiny steel.
Maybe too 80's .
Still holds the carb hermetically closed,
while making holding and rolling somewhat easier!
Cheers.
Is that a Begleri? Very cool if so! One of my fingers is still sporting a bruise from a pretty heavy one I made to practice finger rolls with
Edit: @VanCough
Ya it's a skill toy similar to butterfly knife, pen spinning, etc.
Lot of fun and good way to keep my hands busy when I am bored or thinking. Once you get used to certain motions it's kinda automatic. I mess with one hanging out at my vape station a lot. Made some for my boys and they have been having fun competing with them. Some paracord and scrap sockets and nuts you can make a lifetime supply for like $5 lol
Last edited:
Never thought that a begleri would be known outside Greece!Looks like my package touched down!!! I should be able to grab it in a few hours I think. :fingerscrossed:
Is that a Begleri? Very cool if so! One of my fingers is still sporting a bruise from a pretty heavy one I made to practice finger rolls with
I 've always thought that things like tzatziki,ouzo,gyros,souvlaki,etc were the known greek originating stuff.
Yes,it's a begleri.My cheapo " edc" one.
VanCough
Environmentalist
What's a begleri?
Edit: Begleri (Greek: μπεγλέρι) is a small skill toyconsisting of one or more beads at either end of a short string or fine chain. The toy can be flipped and twirled around the fingers to perform tricks. Begleri originated in Greece, and originally derived from the Greek rosary or komboloi, which serve the function of worry beads, and are often flipped around to pass the time or keep the hands busy
Edit: Begleri (Greek: μπεγλέρι) is a small skill toyconsisting of one or more beads at either end of a short string or fine chain. The toy can be flipped and twirled around the fingers to perform tricks. Begleri originated in Greece, and originally derived from the Greek rosary or komboloi, which serve the function of worry beads, and are often flipped around to pass the time or keep the hands busy
Well,it is also a pair of beads connected with a cord ,
that really annoys,upsets and really makes mad
my ex-wife,my mother,my sister and
pretty much all the rest of female human beings I happen to know.
Last edited:
VanCough
Environmentalist
@stardustsailor that is fucking cool I'm getting one
DirtyD
Well-Known Member
Loving this m. Once I got o ring arrgmt and hit technique down, huge fucking clouds. Crazy how much vapor this thing pushes. I like low draw resistance, usually, but the hits are so fucking thick I'm willing to let it go with this bad boy. Tasty huge hits. Buzz from hell. Now must get omni . waiting for ti.... Cheers all,
D
D
Puffers
Micro-Climate Mastermind
Sorry for the shitty pics. I'll get some better ones later with more time and better lighting.
Delivery was bitter sweet.
The M is a simplistic beauty, but I can tell it will hit like a beast with some practice. I wiped it down, did a quick burn off then packed up and did two quick click cycles. Tasty and effective.
Got some pretty parts for my Omni.... but the Omni and matching dabber is MIA. Already talked to George and I am confident I will be taken care of, but man do I wish It was in my hands. Oh well what's a few more days for something I should have for decades to come.
Lots of little misc parts from a basic kit not shown. The M will get put to some heavy lifting in the next few hours. Can't wait! The Full Metal strain tasted delicious.
Last edited:
Alegre
Pobre payaso
That's sick as hell! So unique!
Sorry for the shitty pics. I'll get some better ones later with more time and better lighting.
Delivery was bitter sweet.
The M is a simplistic beauty, but I can tell it will hit like a beast with some practice. I wiped it down, did a quick burn off then packed up and did two quick click cycles. Tasty and effective.
Got some pretty parts for my Omni.... but the Omni and matching dabber is MIA. Already talked to George and I am confident I will be taken care of, but man do I wish It was in my hands. Oh well what's a few more days for something I should have for decades to come.
Lots of little misc parts from a basic kit not shown. The M will get put to some heavy lifting in the next few hours. Can't wait! The Full Metal strain tasted delicious.
cybrguy
Putin is a War Criminal
At this price point its pretty easy to just take a shot. Truth is you will probably love it and get upgraded versions later.
Ramie121
Well-Known Member
Ok, I have had them Omni for about 3/4 months and I have quite a concerning problem/fault.
My condenser has started fraying. Small shavings of so metal are coming off it and into my mouth. Is this meant to happen? Probably not. Also, the tip has started bending.
I was under the impression that this vape was built to last. Not built for less than 4 months use. Its annoying because I have 3 vapes from Dyna, the M, Omno and Glass. If the build quality of the omni is anything to go by I will be replacing them all very soon. This sucks because I actually really enjoy using them.
My condenser has started fraying. Small shavings of so metal are coming off it and into my mouth. Is this meant to happen? Probably not. Also, the tip has started bending.
I was under the impression that this vape was built to last. Not built for less than 4 months use. Its annoying because I have 3 vapes from Dyna, the M, Omno and Glass. If the build quality of the omni is anything to go by I will be replacing them all very soon. This sucks because I actually really enjoy using them.
Last edited by a moderator:
I can't really see what you're on about from the pictures, you seen to have done the same photo twice. Are you maybe talking about a few small burrs coming loose?
I always give my vapcaps (and any other machined vape gear) an iso bath on arrival, followed by an inspection and tidy up with a diamond file if need be. I never had any burrs on either of my omnis, but found a few on the M.
Not sure how you'd bend the tip (or any part for that matter) unless you're using it as a pry bar. The important thing is. Does it still work? I'm guessing it must, there's not a lot to go wrong.
In which case, why would you replace it? Tidy up the mouthpiece with a small file and a bit of fine grain sandpaper, give it a thorough wash with some iso and you're done. Short of literally flattening the bowl section or destroying the cap, I can't see how you could make an omnivap unusable, and even then, individual spares are available.
Devotion.
almost there
Well-Known Member
Congrats, it's beautiful. That was my secret order but I had to pass it up bc the standard size vapcap isn't ideal for me
Sorry for the shitty pics. I'll get some better ones later with more time and better lighting.
Delivery was bitter sweet.
The M is a simplistic beauty, but I can tell it will hit like a beast with some practice. I wiped it down, did a quick burn off then packed up and did two quick click cycles. Tasty and effective.
Got some pretty parts for my Omni.... but the Omni and matching dabber is MIA. Already talked to George and I am confident I will be taken care of, but man do I wish It was in my hands. Oh well what's a few more days for something I should have for decades to come.
Lots of little misc parts from a basic kit not shown. The M will get put to some heavy lifting in the next few hours. Can't wait! The Full Metal strain tasted delicious.
. I wanted it to work out so bad bc the raw edge is so rare and amazing, unfortunately I can't twirl the shorter length so comfortably. Enjoy it for both of us
SloJimFizz
Unknown Member
Your what's wrong with this photo skills have let you down.
1- headphones coiled in the upper left corner in top photo.
2- Finger tips are touching on lower photo
Clearly two different photos.....of the exact same thing.
Squiby
Well-Known Member
@Ramie121
I can't see any defect in the pics you posted. All I can see is that you have adjusted the Omni mouthpiece and condenser to the most open air flow position.
If you have not cleaned your Omni, I would do so now. As mentioned above, there may be remnants from the machining process. Once flushed away, you'll be good.
The Omni is a pretty tough number and difficult to damage without pretty extreme deliberate force. I have had my Vapcaps - various models including the Omni- for a year and I cannot foresee any possibility of a condenser fraying or the tip bending under any semblance of normal use.
What about all the other Vapcaps in your collection? Do they operate properly?
https://m.youtube.com/watch?time_continue=69&v=Uv5N_XwODjw
I can't see any defect in the pics you posted. All I can see is that you have adjusted the Omni mouthpiece and condenser to the most open air flow position.
If you have not cleaned your Omni, I would do so now. As mentioned above, there may be remnants from the machining process. Once flushed away, you'll be good.
The Omni is a pretty tough number and difficult to damage without pretty extreme deliberate force. I have had my Vapcaps - various models including the Omni- for a year and I cannot foresee any possibility of a condenser fraying or the tip bending under any semblance of normal use.
What about all the other Vapcaps in your collection? Do they operate properly?
https://m.youtube.com/watch?time_continue=69&v=Uv5N_XwODjw
Your what's wrong with this photo skills have let you down.
1- headphones coiled in the upper left corner in top photo.
2- Finger tips are touching on lower photo
Clearly two different photos.....of the exact same thing.
In my defence, the photos were just links when I replied, I couldn't have really done a side by side comparison haha
GeeWhiz
Well-Known Member
I figured out how to do this.
I had the same issue. all you need to do is use the "forgot password" option since they automatically made an account for you when you ordered (i mean the system registered your email address but because you did not set it up it does not show that you have an account to their eyes but.. you kinda do). When you use the lost password option it sets you right up. Also I have not read down further but you will likely be contacted back eventually. I am sure that lil company is swamped right now but they just made their biggest windfall ever so they have bent over backwards for pretty much everyone. GO DNAVAP! 
@stardustsailor don't forget bombes, Retsina and feta pasties.
Did a one piece Kingwood stem today which failed, operator error.
Instead of waste it I re-did it.
Blackwood, Kingwood with a brass accent, with an inclusion in the BW just for good measure.
Did a one piece Kingwood stem today which failed, operator error.
Instead of waste it I re-did it.
Blackwood, Kingwood with a brass accent, with an inclusion in the BW just for good measure.
ClearBlueLou
unbearably light in the being....
I do see a rough area on the inner right edge of the condenser in the photos: it looks like it should have been machined off. I'd see what a small round file could do with that - either removal, or smoothing-off to ease your concerns.