darbarikanada

Well-Known Member
As a flavor chaser and micro-doser, any other parts or accessories that would enhance my vaping experience? Any "upgrades" that I'm likely to want after trying the M?

if you don't know about how to change the screen position, that might be useful for micro-dosing. otherwise you're set.
 
darbarikanada,
  • Like
Reactions: grokit

Winegums

I make things from wood
Accessory Maker
This 14mm VonG is heading to a new home soon. It's going to be hard to let go.

29e3zg8.jpg
 

bounce5

Well-Known Member
Dial M for marijuana.
It's funny, I swear I only hear one click on the heat up and two on the cool down, and a little louder than usual.
I like the look and feel of it.

2SglpRV.jpg

Nice, but I'm dissapointed to see that the little triangle indentation at the carb hole was replaced with a line shaped indent. The little triangle looked sweet. I hope he still has some of those left.
 

buckhakeesah

Well-Known Member
M order ??

I'm ordering the M, triple torch, hemp fiber, and extra SS screens.
As a flavor chaser and micro-doser, any other parts or accessories that would enhance my vaping experience? Any "upgrades" that I'm likely to want after trying the M?

Thanks
Might wanna get a single flame torch into the mix in addition to your triple torch. You play around and find what you like but as @WakeAndVape stated earlier, it offers a different kind of cooking that is very enjoyable and I've had some very amazing draws that are completely bliss from my single flamer.
 

whatitdew

Vapes R Great
Question for all the experienced vapcapers

On my glass OG the heating cap tends to pop off a bit when it clicks, sometimes pops right off. Is this normal behaviour? It is super annoying.

Still practicing trying to get the technique down before my Omni gets here
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Question for all the experienced vapcapers

On my glass OG the heating cap tends to pop off a bit when it clicks, sometimes pops right off. Is this normal behaviour? It is super annoying.

Still practicing trying to get the technique down before my Omni gets here
Mine does the same sometimes despite the cap not being loose at all. Just a tiny bit, not enough to make much of a difference in my experience, and not very often. I just bump it down with the end of my lighter. If it's a lot for you and it affects the experience, try very gently getting it "out of round" by pressing it between your fingers. Do it a tiny bit, then check, redo if needed.
 

Winegums

I make things from wood
Accessory Maker
My cap was just falling off when I first got it, so I just very gently pushed the "scoop" towards the inside just a hair, and it now grips the glass really well, with out making it go out of round.
I would definitely recommend bending the scoop inward rather than making the sides of the cap grab the tip. I had to do this with my cap when I received my 4th gen.
 

voodoo_vape

Vapour RebeL
Good morning everyone!!! My morning coffee has been a really enjoyable one since by having my 1st ship, I was checking my email and confirmation has arrived!!

M order ??

I'm ordering the M, triple torch, hemp fiber, and extra SS screens.
As a flavor chaser and micro-doser, any other parts or accessories that would enhance my vaping experience? Any "upgrades" that I'm likely to want after trying the M?

Thanks

I was on the same situation like you.. Everything on their dynashop looked so so intriguing and attractive!! I also ordered the M with some stashes, which from I've heard they're super stealth and safe and I also got the Blackwood VonG stem, which I'm sure I'll be able to vape it directly from my mouth as well. Hemp fiber and SS screens were also added in my cart, especially after reading @Squiby post about the extra filtering of your VC while keeping your condenser clean for longer!
Probably DynaStash will be my next thing that I'll wanna get but I def want to test this beaty first, make sure that I'm falling in love with her and then order any other tools and gadgets... :D

Man, they really are burning the midnight oil over at Dynavap. I got a shipping confirmation email at 12:39 am. Pretty excited to get my new "M". Thanks a bunch George @VapCap, Arielle @Arielle.Dynavap, Matt @PAVANYD, and everyone else at Dynavap! You guys rock! :rockon:

We're on the same batch man!! I got my confirmation email 9.00am local time, which am +2 on UTC... Their midnight oil is burning like the Olympic Games torch!! :p :p
Many thanks as well you guys @VapCap @Arielle.Dynavap @PAVANYD for your effort and hard work!!
I just cannot wait now to get this purple or green envelope in my hands!!! SUPER EXCITED!!!
 

voodoo_vape

Vapour RebeL
@voodoo_vape you'll love it.
Vapcap is my go to since getting my first one.

I think I will @duff ...
Everything I've seen so far has made my mind spin with the potential of this vape and its simplicity!! And of course all the custom made items, pipes, stems and so on...
All my SMOKER friends that have seen it they've been really tempted as well.. not to mention my "vape" friends... I can see another big-ish order coming from Greece really soon :p
This is the future vape that every household should have :D
 

stardustsailor

Well-Known Member
Accessory Maker
I've ordered mine at 04/01 ,but still when I try to track my parcel at USPS Package Tracking service I get :"Pre-Shipment info sent to USPS,USPS awaiting item " .
:shrug:

I just hope that the greek ΕΛΤΑ ,will be quick for a change .

And come to think about it ...
I hope my M doesn't end up somewhere in FYROM ,as I've placed "Macedonia" in the "State/Region" cell,at the ordering form !
:doh:
 

voodoo_vape

Vapour RebeL
I've ordered mine at 04/01 ,but still when I try to track my parcel at USPS Package Tracking service I get :"Pre-Shipment info sent to USPS,USPS awaiting item " .
:shrug:

I just hope that the greek ΕΛΤΑ ,will be quick for a change .

And come to think about it ...
I hope my M doesn't end up somewhere in FYROM ,as I've placed "Macedonia" in the "State/Region" cell,at the ordering form !
:doh:

Best of luck I wish man!! On the contrary tho, I've found our dear ΕΛΤΑ to have upgraded their services a lot lately! Let's hope that it is that way with the North ELTA :p
Saying 04/01 is the american way I suppose, right? Otherwise, waiting for an order that long, it's almost certain that your order has been lost somewhere in FYROM.. :doh: and you should contact either Dyna or ELTA for some extra clarification!!
 

stardustsailor

Well-Known Member
Accessory Maker
Best of luck I wish man!! On the contrary tho, I've found our dear ΕΛΤΑ to have upgraded their services a lot lately! Let's hope that it is that way with the North ELTA :p
Saying 04/01 is the american way I suppose, right? Otherwise, waiting for an order that long, it's almost certain that your order has been lost somewhere in FYROM.. :doh: and you should contact either Dyna or ELTA for some extra clarification!!

Yeah,it's the american way .
First of April ,placed my order .
Anyway,I hope that the "GR" indication underneath the "Macedonia" one ,
will prevail !

Can't wait to bake my herb with the M .
 

ArthurJ

Well-Known Member
Not quite. I can hold the tip close to the heater and draw through it BUT I can't sit it on top of the heater and leave it connected. So you can kind of use it but it doesn't quite fit like the ti tips do.

@ArthurJ you will have to tell us if the M pairs as a stem for the Woodscents. I've heard 2 answers to that. I added to my order so I probably slowed it down a day.
 

Hogni

Honi soit qui mal y pense
Hi Guys, I'm totally with you all in your hopeful expectations and your joy of ordering new DV stuff but is it really necessary that everyone is posting here about his order of "M" and a real time report about it's shipping? ;)

Haven't seen much other posts the last 10 pages. Sorry for that but it's getting a little bit boring only seeing posts regarding your state of shipment.

:peace:
 

voodoo_vape

Vapour RebeL
Hi Guys, I'm totally with you all in your hopeful expectations and your joy of ordering new DV stuff but is it really necessary that everyone is posting here about his order of "M" and a real time report about it's shipping? ;)

Haven't seen much other posts the last 10 pages. Sorry for that but it's getting a little bit boring only seeing posts regarding your state of shipment.

:peace:

Eh.. come on dude... would you rather see posts about flaws and RMA's and whatever else there is the GH forum?? Or would you like comparing waiting times and frustrate when someone else gets his/her own before yours..?? This is a daamn healthy topic I'd say!!
There has been a new launch... what else would you expect seeing here, now?
Plus the fact that all those posts are normally "love-included" as well... Don't spoil the moment....
my little penny of advice...
 

ClearBlueLou

unbearably light in the being....
I've ordered mine at 04/01 ,but still when I try to track my parcel at USPS Package Tracking service I get :"Pre-Shipment info sent to USPS,USPS awaiting item " .
:shrug:

I just hope that the greek ΕΛΤΑ ,will be quick for a change .

And come to think about it ...
I hope my M doesn't end up somewhere in FYROM ,as I've placed "Macedonia" in the "State/Region" cell,at the ordering form !
:doh:
a fact of life, brah - I ordered my Ms & support gear on 3/31, resisted adding anything to avoid slowing things down, got shipping confirmation on 4/2, got "George has sent you..." on 4/3 - the same day folks started reporting getting theirs - and now this morning I'm told that IT'S JUST NOW LEAVING WISCONSIN...so with luck I might have it before Easter?

I'm sure you'll get your stuff, and I'm sure you'll be happy with it (I am w/ my Omni) but there's just no telling when you'll get it, no matter what you hear.

(I want to be sure I'm clear: I am not complaining about our brilliant and hard-working friends @ Dynavap, who do such great stuff that we all get excited; nor am I bitching about the stressed and overworked folks @ USPS, who have to crawl uphill under fire every day: the hold-up seems to be entirely on the part of their mailer service, based on my years of watching things get here via USPS tracking, and I'm probably not bitching about them, either. Like I said, a fact of life....)

PS: Sorry, Hogni!
 
Last edited:

Winegums

I make things from wood
Accessory Maker
Eh.. come on dude... would you rather see posts about flaws and RMA's and whatever else there is the GH forum?? Or would you like comparing waiting times and frustrate when someone else gets his/her own before yours..?? This is a daamn healthy topic I'd say!!
There has been a new launch... what else would you expect seeing here, now?
Plus the fact that all those posts are normally "love-included" as well... Don't spoil the moment....
my little penny of advice...
There's a dynavap shipping thread is there not?

http://fuckcombustion.com/threads/dynavap-vapcap-shipping-discussion.20415/
 
Top Bottom