Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Thanks bro! 
Okay guys received my VonG today!!! Flying indo tomorrow and leaving my house today so obviously will not be bring it to Indonesia, but WOW!
Unky had three bowls but off the bat I can say, just the look is amazing I only got a standard one and she's beautiful.
Bowl seems bigger than my OG but I will play with that.
The one absolute amazing improvement is the draw with a closed carb, still slightly thick but muck closer to an older solo I'd say and you can give it a really nice pull.
Unky had three bowls but off the bat I can say, just the look is amazing I only got a standard one and she's beautiful.
Bowl seems bigger than my OG but I will play with that.
The one absolute amazing improvement is the draw with a closed carb, still slightly thick but muck closer to an older solo I'd say and you can give it a really nice pull.
duff
Well worn
In preparation for my @Winegums stem, I needed at least a tip and a cap to devote to it since re-assembling my TI Woody isn't so much fun.
So for $5 more (cap + tip=$60) I got TI Glassy.
Holy crap.
The parts slide so smoothly.
Do the tip and condenser slide as smoothly in the titanium?
By the way, there are a ton of folks that have received caps this week.
Unbelievable and congrats to @VapCap
So for $5 more (cap + tip=$60) I got TI Glassy.
Holy crap.
The parts slide so smoothly.
Do the tip and condenser slide as smoothly in the titanium?
By the way, there are a ton of folks that have received caps this week.
Unbelievable and congrats to @VapCap
Last edited:
Squiby
Well-Known Member
I have several stems, VonGs and bodies made from wood and metal. The metal stems and bodies - the Omni titanium body, the Stainless Steel Copper Stoned stem and body and the Damascus Steel body - all slide over the Ti Tips smoothly and easily.
The wood stems, bodies and VonGs seem a bit tighter but I think that it just because wood is not as slick as metal. My Burl VonG has a very tight fit, so I tend to only take it apart to clean. I never swap its tip over to another midsection.
I always lubricate the orings before bringing the tip and midsection together with a deliberate but gentle twist and push.
To dismantle, I grasp the midsection close to the tip, grab the tip with my other hand and gently straight out, pull and twist. Never try to wiggle and wobble it out of there. If it resists, there may be a resin build up. In this case I heat the tip and try again wearing a oven mitt.
Last edited:
Got me keen for a variable carb Omni, but I will say my OG's most disliked aspect or the only aspect I dislike (excluding breakable glass that's material not design in my mind) was the tight draw with a closed carb, and the inevitable feeling of too much fresh air of the open carb I couldn't get past it. Still used my OG vapcap more than any other vape by the and probably more than all my other vapes combined by the time their life was over. THIS VONG!!! closed carb is slightly restrictive but I don't feel like I need to touch my cheeks and turn my face red. No bong for 2 weeks until I'm home (no VC in 24 hours either ;() butttt I believe the bong will change things a lot, the OG even with its tight closed carb draw native would pull better through a reasonable Bong, might even order another little vape bong for the VC to be there when I get home
Schroedinger
Sober and stoned
@VapoShop How about stocking up with spare parts and more models for us Europeans. The beauty is in the modularity. I have recently bought the Ti-Woody S and would not mind to buy some spare parts or an Omnivap condenser.Just a little heads up for those in Europe waiting for the DynaStash cases to appear online (following an earlier post from me); they're now available from us (link) in Red Cedar and Walnut
We currently have an order pending with DynaVap for spare parts (and other products). Unfortunately not all spare and replacement parts were available in wholesale quantities from the moment we started carrying their product. We (and DynaVap) are working on this.
Schroedinger
Sober and stoned
Dutch-Mic
Well-Known Member
Two weeks ago I asked Matt if the Ti mouthpiece for the Woody S was in stock, but unfortunately not. Hopefully they will be back soon!
@nickdanger thank you so much for sharing those pictures, humbling experience as ever seeing my work in other peoples homes.
almost there
Well-Known Member
that's brilliant!!! How do I make one? Is it just by attaching a glass pipe into the og silicon? Wow, I'm gonna have a pitcher in every room this summerCalifornia Dreamin, or looking for a Genie in a VapCap....
Last edited:
Mr. Me2
Well-Known Member
I thought changing avatars was the way to keep winter doldrums away.Yassar--adapt-a-vape, keeps the winter doldrums away.
Btw, I thought your last one was Ghostbusters related until I enlarged it. And I really like this one - is it Puff, the Magic Dragon?
The Beagle
Bubbles & Bags
That's awesome, I love lab glass repurpose as vaping tools:
Spare caps, filters and o rings please!
Dynalowrider
Well-Known Member
"I'm just a guy, being quiet and shy, trying to get by, in a land of push and shove."
I'm not trying to be a curmudgeon. Please don't crucify me. This is something whose time has come.
I am sure I'm going to cause a s--t storm here, but you guys, (posters of pictures of your vapes, bongs, wpas, whatever), are eating up my data. There is already a discussion for glass.
I have to pay for my internet. Pictures use a lot of data. Gifs even more. If the cartoons are what you are after, there is YouTube. Me I'm trying to learn how to get the most out of my vape and medicine.
I'm on a fixed income, (no overtime to make extra money).
I'm not begrudging the posting of pictures and gifs by anyone, but , (just thinking outside the box here), wouldn't it better serve the FCers to have a thread for VapCap pictures of it's own.
Maybe you could just say on here "Go to Dynavap pictures to see my new possession."
I'm not trying to start a stink here, but myself I'm here for the Dynavap and the camaraderie of like souls. I realize people are proud of their possessions and want to show them off, but all the parts are the same, the colors are different. Write down what color it is so I can imagine what it looks like. That keeps my brain active.
Go ahead I'm an old man. I can take it. Doc
I'm not trying to be a curmudgeon. Please don't crucify me. This is something whose time has come.
I am sure I'm going to cause a s--t storm here, but you guys, (posters of pictures of your vapes, bongs, wpas, whatever), are eating up my data. There is already a discussion for glass.
I have to pay for my internet. Pictures use a lot of data. Gifs even more. If the cartoons are what you are after, there is YouTube. Me I'm trying to learn how to get the most out of my vape and medicine.
I'm on a fixed income, (no overtime to make extra money).
I'm not begrudging the posting of pictures and gifs by anyone, but , (just thinking outside the box here), wouldn't it better serve the FCers to have a thread for VapCap pictures of it's own.
Maybe you could just say on here "Go to Dynavap pictures to see my new possession."
I'm not trying to start a stink here, but myself I'm here for the Dynavap and the camaraderie of like souls. I realize people are proud of their possessions and want to show them off, but all the parts are the same, the colors are different. Write down what color it is so I can imagine what it looks like. That keeps my brain active.
Go ahead I'm an old man. I can take it. Doc
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Maybe start a new thread for no pictures, probably won't get as much traffic to clog your data and you won't be upset. Or maybe ask for an option in the software to disable pics and such? Hope it works out for you, but your definitely in the minority of "no pictures or videos" imho.
Happy St. Patty's Day
(Insert drunken leprechaun picture here)
He's green and gold with a red beard...
TeeJay1952
Well-Known Member
Tell your phone not to load images. Us Millennials ( I was born 7 millennia back) think in songs and images and pictures.
NickDlow
Log Hog
That's because only one person would probably contribute to that thread lmao!
Dynalowrider
Well-Known Member
Folks in Discussion Glass" The Glass Collection Thread (post your pics), and Recent Acquisitions- Post Your Pieces Here, are basicly a couple of picture threads. The Discussion Vapor Related Equipment has pages of picture threads. Why not just post pictures on a picture thread? Is there something wrong with this logic? Doc
By golly teejay you hit it on the nail. You guys aren't thinking in facts, you are thinking in "Alternative Facts" and "Fake News".
By golly teejay you hit it on the nail. You guys aren't thinking in facts, you are thinking in "Alternative Facts" and "Fake News".
Last edited:
Ricardo
Well-Known Member
Is that red red or more orangey...?
Darn, I'm having trouble trying to visualise that
If only there was another way for you to share your thought.... 
alltoreup
Damn you, party liquor
In the interest of no pictures...it's show and tell time again
I finally got some time to fiddle around with some more titanium bodies and made a discovery in my old vape parts drawer. An old titanium nail and it's 14mm female fitting. Eyeballing the diameter of the fitting got me a little excited. I wonder if I can make that fit???
I did. The Ti 14mm adapter is friction fit to the body.
Here is a spinning Ti mouthpiece on a Ti body with a Ti 14mm GonG. So is this a TonG, or a TionG?? I'm not sure, but it sure turned out nice. Hefty too. 22.5 grams. I haven't decided about colors yet. I may leave it shiny for a while.
And for its maiden voyage I popped my concentrate tip on there with its mesh concentrate pad I made and fired her up.
To the moon!!!
Happy Friday cappers!
I finally got some time to fiddle around with some more titanium bodies and made a discovery in my old vape parts drawer. An old titanium nail and it's 14mm female fitting. Eyeballing the diameter of the fitting got me a little excited. I wonder if I can make that fit???
I did. The Ti 14mm adapter is friction fit to the body.
Here is a spinning Ti mouthpiece on a Ti body with a Ti 14mm GonG. So is this a TonG, or a TionG?? I'm not sure, but it sure turned out nice. Hefty too. 22.5 grams. I haven't decided about colors yet. I may leave it shiny for a while.
And for its maiden voyage I popped my concentrate tip on there with its mesh concentrate pad I made and fired her up.
To the moon!!!
Happy Friday cappers!
I think photos are what make this thread exciting. A lot of other threads on the forum just don't get to the same level of visual stimuli. I personally love all the wood and vape porn we get in this thread.
On the other hand I can see why photos that aren't a Vapcap would cause issue.
I can minimize, (and already limit) my photo posting, but I don't think I could stop and hope to describe with words what I create.
On the other hand I can see why photos that aren't a Vapcap would cause issue.
I can minimize, (and already limit) my photo posting, but I don't think I could stop and hope to describe with words what I create.
Last edited:
Ricardo
Well-Known Member
Friend, I feel like a prince
duff
Well worn
I want the pics!
Sometimes I scroll through the pages just looking for them.
If data usage is the main concern, and you are on a cell phone you can turn on data saving.
I believe that stops the pics from downloading.
No!