Mr. Me2
Well-Known Member
Don't know for sure, but my guess is Puffitup for the best price. I forget their FC discount code... (Fc15?). Hope this helps!
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
Blackfriars
Connoisseur of cannabis
See... I always buy directly from Storz & Bickel. It shouldn't matter but the records will always be with Corporate that way.
vapviking
Old & In the Way
Don't know how to post a pic lol.
Modnote: Edited to display image
I use the same elbow, with an 8" long silicone tube to the Mighty on a stand. Then from glass piece I also use a 30" whip (+arizer straight glass mouthpiece). So all stays set on table, only the whip gets passed.
Though lately I have been using muzzmod a lot; when inverted over my glass it's centered and so it stays easily on its' own.
lotsa ways!
whatitdew
Vapes R Great
One of my favorite ways to use my Mighty right now is to set it to your highest desired temp (200c for me) and then start pulling strong and long once the temp gets about 180c
Then I just try to keep the heater below the set temp until I run out of lung power haha.
That first hit when the heater climbs from 180-200 is amazing
I have been doing this with full dosing caps right before bed
If I had to pick one set temp setting it would be 190c or 193c I think.
Then I just try to keep the heater below the set temp until I run out of lung power haha.
That first hit when the heater climbs from 180-200 is amazing
I have been doing this with full dosing caps right before bed
If I had to pick one set temp setting it would be 190c or 193c I think.
Blackfriars
Connoisseur of cannabis
Good morning, everyone.
I had my new Mighty held at FedEx and went by this AM to pick it up. Looks like it's already pretty much fully charged for my afternoon walk later today.
Should also get my 2qn stand from Z. today. I will take some more photos later of my unit on the stand.
I had my new Mighty held at FedEx and went by this AM to pick it up. Looks like it's already pretty much fully charged for my afternoon walk later today.
Should also get my 2qn stand from Z. today. I will take some more photos later of my unit on the stand.
vapviking
Old & In the Way
You show far more restraint than I would, waiting til 'later'!
Blackfriars
Connoisseur of cannabis
Well, considering I am at work in my office. LOL... I kinda have to.
CanadianFlowers
Vapor Enthusiast
Yo you guys are gonna laugh lmao 
but I jury rigged my own water pipe adapter by simply cutting a hole in a cheap silicone jar an using an adapter, then a slit at the top for the mouthpiece ,its actually airtight but clunky 
check it out
On another note, its 12.10 pm in northern Nb Canada and there's a massive ice storm going on atm. The power has been out for two hours and the mighty is serving me well, also waiting on some master purple kush
expected delivery date should be tmro..
but I jury rigged my own water pipe adapter by simply cutting a hole in a cheap silicone jar an using an adapter, then a slit at the top for the mouthpiece ,its actually airtight but clunky check it out
On another note, its 12.10 pm in northern Nb Canada and there's a massive ice storm going on atm. The power has been out for two hours and the mighty is serving me well, also waiting on some master purple kush
expected delivery date should be tmro..shaolinmilk
Well-Known Member
The Mighty and Grasshopper are my new 1-2 punch for portables. Grasshopper is better than the Mighty through water, however the Mighty is way better than the Grasshopper without water.
Yo you guys are gonna laugh lmao
On another note, its 12.10 pm in northern Nb Canada and there's a massive ice storm going on atm. The power has been out for two hours and the mighty is serving me well, also waiting on some master purple kush
Are you sure you are on the mainland and not on that island off to the east? Looks like something that might have been dreamed up and made while hitting the screech too hard.
CanadianFlowers
Vapor Enthusiast
Are you sure you are on the mainland and not on that island off to the east? Looks like something that might have been dreamed up and made while hitting the screech too hard.
Lots of bubba kush has inspired me LOL
Last edited:
TanukiCoast
Fogbound
My mighty wasn't able to vibrate for about ten minutes and then started working again, has anyone else experienced this? It's working fine now but wondering if I should send it to S&B for a check up 
iamnotbatman
Member
hey guys, I tried to look for my answer but to big of a thread at this point haha anyway has anyone ever tried this glass mouthpiece for the mighty? does it make much of a difference?
http://www.vapingfans.com/glass-mouthpiece-for-mighty-crafty-vaporizer.html
http://www.vapingfans.com/glass-mouthpiece-for-mighty-crafty-vaporizer.html
Blackfriars
Connoisseur of cannabis
Mine is on order and already paid for but the site isn't shipping until after February 5 at this point (holidays).
Vaporcussion
Well-Known Member
Yes! I love my glass mp, it has been a game changer. When I go back to the regular mp, it feels squished and makes me cough more, for whatever reason.
You're not alone! Low temp vape rules
Exactly.
yes, that's happened to me several times, Not going to worry about it just yet
Please post your opinion after you try it. I think it's the bomb
V-apE
☮☮☮
I use one from vapingvans....its ok but the draw is more restricted which i don't like.
Blackfriars
Connoisseur of cannabis
The glass mouthpiece model for the Mighty was touted here as having bigger draw thanks to the wider-mouthed end. Is that not the case? Thanks.
V-apE
☮☮☮
The mouth end is bigger indeed but the opening on the other end(connected to the CU) is smaller.
But maybe there is a different with the one from vapingvans and others?? That i don't know.
It is not one of the best pictures but here is the inlet side.
Last edited by a moderator:
Vaporcussion
Well-Known Member
Hmm, I feel the opposite; it's definitely more wide open.
Just checked both; I can see it both ways. When I blow through the S&B mp, I hear a flute sound, indicative of a smaller opening. The glass has a lower pitched sound, indicative of a slightly larger cavity.
Anyway, the glass comes across as more open to me, and the "feeling" of cooler vapor; also I cough less with the glass.
All I can say is to try glass for a week, and then go back to S&B and compare! Would love to hear thoughts from people who tried this test...
Bomb33
Well-Known Member
Still waiting on vapingfans??? Ordered almost a month ago lol. Will let you know how it is don't worry. I'm playing around with the sneaky Pete muzzmod mod and the arizer whip. My conclusion is this lol. I prefer the whip method? Didn't think I would but for some reason the German technology of the cu somehow gets me higher lol and seems to give better hauls. With or without capsules. Don't get me wrong the muzzmod mod is handier and easier on cleaning. It has me confused cause one would think the muzzmod mod is the way to go.???? Maybe it's not sealing properly? Waiting on vaping fans also for thier muzzmod mod? Almost about to get my hacksaw lol and make a Elmomuzzmod. Also I use the technique that was suggested but the inverted part I just don't like lol. Basically comes down to preference and convenience. My tolerance is way too high. Need to take a break.....
vapviking
Old & In the Way
The draw resistance from c/u and whip might be just right for you, and Mighty. Sometimes, like with muzzmod only (and depending on material loaded), it's possible draw too fast for Mighty to keep up dense production, so slowing down ( in this case automatically because of setup) might put you in the sweet spot. For other folks/other conditions, the muzzmod is da bomb. I do it either way, depending!
SSVUN~YAH
You Must Unlearn, What You Have Learned...
I had this problem early with mine, you can use hemp fiber, organic cotton, or spare screens to fill the gap from loaded material to screen on your sneaky Pete atty. It really made a difference for me, also I'm using the dosing capsules only, with and without caps. Amazed and loving this mighty beast more and more everyday!
Last edited:
Bomb33
Well-Known Member
So I need a really long bong or big chamber to go slower? The little bubbler I find works best with the technique you described but you can't really suck the bowl back in just two rips like someone said. I find I can get 4 or 5 hits outta one bowl. Gonna try goin slow with the muzzmod.
iamnotbatman
Member
hey guys thanks for the reply i appreciate it. I ordered a a few of them so when they ship on feb 5th I will do a review on the glass and plastic piece and show side by side pics etc.
stay blazing my friends...
stay blazing my friends...
Vaporcussion
Well-Known Member
Thanks! I need to know if I'm imagining all this, lol here's an old post that shows some pics as well http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-369#post-1069511