Never thought of it that way, but it makes a lot of sense.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Squiby
Well-Known Member
The parallel condenser is George's newest design for the OG. Below is a link to his post explaining condenser function and this new upgrade. The website is displaying a picture of the old condenser.
http://fuckcombustion.com/threads/dynavap-vapcap.18853/page-233#post-1009727
Right on!!! I love my Aeropress! Simple, tiny footprint especially compared to an electric drip coffee maker and the coffee is produces is superior....all for a fraction of the cost of other coffee makers.
I see a trend...in all things, simplicity and functionality wins out every time.
Long live the Vapcap and the Aeropress!
syrupy
Authorized Buyer
Squiby
Well-Known Member
Rinse and repeat.
I asked for my Damascus body to be etched to expose the grain as well as opposed to the polished finish. I have no idea exactly what process Jason @Dynavap used to expose a raised grain finish, but I love it!
syrupy
Authorized Buyer
I found a fun game to play with my OG + Dynastash. I'm calling it Popcorn.
Here's how it works.....
1. Load a bowl of finely ground material. Pack loosely.
2. Vape bowl until it's done.
3. Place OG on Dynastash magnet.
4. Slowly lift the body off, leaving the cap on the Dynastash. If the material was dry enough and ground finely, it should fall into the cap when the body is lifted.
5, When the cap hits the cooldown click, it launches the material in the air like popping corn.
+1 bonus if both cooldown clicks launch material in the air.
I'm easily entertained.
Here's how it works.....
1. Load a bowl of finely ground material. Pack loosely.
2. Vape bowl until it's done.
3. Place OG on Dynastash magnet.
4. Slowly lift the body off, leaving the cap on the Dynastash. If the material was dry enough and ground finely, it should fall into the cap when the body is lifted.
5, When the cap hits the cooldown click, it launches the material in the air like popping corn.
+1 bonus if both cooldown clicks launch material in the air.
I'm easily entertained.
marduk
daydreamer
jimfish4130
Well-Known Member
I found a fun game to play with my OG + Dynastash. I'm calling it Popcorn.
Here's how it works.....
1. Load a bowl of finely ground material. Pack loosely.
2. Vape bowl until it's done.
3. Place OG on Dynastash magnet.
4. Slowly lift the body off, leaving the cap on the Dynastash. If the material was dry enough and ground finely, it should fall into the cap when the body is lifted.
5, When the cap hits the cooldown click, it launches the material in the air like popping corn.
+1 bonus if both cooldown clicks launch material in the air.
I'm easily entertained.
I can confirm that this works with the omni
I'll have to see if it works my og now, I'm sure it does but I just need to be sure..
Copacetic
Somewhere North of The Wall
So I take some LSD and then the grain pops? What happens when the acid wears off?
Acid was involved
:
George did a deep etch at my request which resulted in a pronounced texture (very grippy), but a fairly uniform greyish matte colour:
It had looked like this before the deep etch (don't know how @VapCap achieved this finish, but I like it too):
Heating the body as hot as my domestic oven would go (about 400 C), and then dunking it in a test-tube of the gun blue (outdoors, with great care!) turned the whole thing a matte black (took about 3 cycles of this process, heated in oven each time), which made the texture very hard to see, but then I 'polished' the raised ridges of the Damascus with fairly fine grit Wet-And-Dry (2000?) glued to a stiff backing (tongue-depressor type stick) to achieve a dark/light contrast (no pic's of this stage, sorry).
I imagine Emery Boards could conceivably be used too.
I then thoroughly scrubbed the interior of the body with scotch-brite pad to rid it of the black oxide surface formed by the hot-blue process, and finally boiled the piece in oil to seal the surface inside and out (sunflower cooking oil was the safest thing I had to hand, but I'd have used a coconut oil/veg oil mix if I'd had any coconut, If I'd had any reclaim I'd have used that too!).
That produced this:
This surface is a lot less grippy, but a lot more satisfyingly tactile and smooth feeling.
Your Damascus is a beauty Squiby, maybe a similar process?
IMPORTANT SAFETY EDIT:
Forgot to say that I also packed the body with sodium bicarbonate and boiled it in water after the hot-blue process to be sure that all the acid was fully neutralized before I boiled it in oil.
Last edited:
Squiby
Well-Known Member
It is likely the same process, since I was essentially copying your Damascus finish...
Greetings!
What an action packed week the past 2 weeks has been.
We now have our laser up and operating. Still a bit of tweaking to do to get it dialed in, but oh boy, to just see the first laser cut caps come out of that machine. Well, it more than made my day.
Here it is.
So then there has been the follow up with the vendors from the IMTS show. Really cool things ranging from new and improved cutting tools, robotics, and some of the most advanced manufacturing machinery I have ever seen. In fact, as I write this I am on a plane on my way to LA to go look at some of it right now.
When I think about what this type of equipment could mean for Dynavap, I get excited. Then here comes what I think is the best part.
Development! Probably one of my favorite things about this project is how it enables me to focus on design and development, and at the same time it is now providing me access to technology and materials I have only dreamed of being able to work with. What will I be able to do with an 8 axis CNC machine? More titanium and other exotic materials? Only time will tell.
And check out this OmniVap with a blasted mouthpiece.
There are some really exciting things coming!
Thank you everyone for helping me get to this point.
Cheers,
George
What an action packed week the past 2 weeks has been.
We now have our laser up and operating. Still a bit of tweaking to do to get it dialed in, but oh boy, to just see the first laser cut caps come out of that machine. Well, it more than made my day.
Here it is.
So then there has been the follow up with the vendors from the IMTS show. Really cool things ranging from new and improved cutting tools, robotics, and some of the most advanced manufacturing machinery I have ever seen. In fact, as I write this I am on a plane on my way to LA to go look at some of it right now.
When I think about what this type of equipment could mean for Dynavap, I get excited. Then here comes what I think is the best part.
Development! Probably one of my favorite things about this project is how it enables me to focus on design and development, and at the same time it is now providing me access to technology and materials I have only dreamed of being able to work with. What will I be able to do with an 8 axis CNC machine? More titanium and other exotic materials? Only time will tell.
And check out this OmniVap with a blasted mouthpiece.
There are some really exciting things coming!
Thank you everyone for helping me get to this point.
Cheers,
George
fågel
᚛ᚓᚐᚅ᚜
i've been reading through this thread for the past few hours and i'm so sold on this i want it right now! i only have an UD and have recently really needed a portable, but money has been holding me back. as of late i've had to go back to spoon pipes for on the go use 
but the og seems to meet all my needs, price point included!! i just placed my order, can't wait to check it out
but the og seems to meet all my needs, price point included!! i just placed my order, can't wait to check it out 
1_gr8_underdog
Trapped in the Astral Planes Back from the dead
Vapodudule
Well-Known Member
b0
Cloudy...
Greetings!
What an action packed week the past 2 weeks has been.
We now have our laser up and operating. Still a bit of tweaking to do to get it dialed in, but oh boy, to just see the first laser cut caps come out of that machine. Well, it more than made my day.
Here it is.
So then there has been the follow up with the vendors from the IMTS show. Really cool things ranging from new and improved cutting tools, robotics, and some of the most advanced manufacturing machinery I have ever seen. In fact, as I write this I am on a plane on my way to LA to go look at some of it right now.
When I think about what this type of equipment could mean for Dynavap, I get excited. Then here comes what I think is the best part.
Development! Probably one of my favorite things about this project is how it enables me to focus on design and development, and at the same time it is now providing me access to technology and materials I have only dreamed of being able to work with. What will I be able to do with an 8 axis CNC machine? More titanium and other exotic materials? Only time will tell.
And check out this OmniVap with a blasted mouthpiece.
There are some really exciting things coming!
Thank you everyone for helping me get to this point.
Cheers,
George
Exactly what I wanted, was gonna send you an email about it. Love the look of the blasted mouthpiece!
lookhigh
FC member
When i am filling my VC i am DOC, then when i use my VC i am HAPPY, then DOPEY and later SLEEPY.
When i sniff my VC i get SNEEZY and when my lighter runs out of gas i get BASHFULL. When i cannot use my VC i am GRUMPY.
Think i have multiple dwarf disorder?
And where is snow white?
When i sniff my VC i get SNEEZY and when my lighter runs out of gas i get BASHFULL. When i cannot use my VC i am GRUMPY.
Think i have multiple dwarf disorder?
And where is snow white?
StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
I don't hold my vong though, so it being tactile doesn't help.
Ha! This one I can answer....
She just vaped all your weed and is now fighting the munchies tryin to avoid that ole poison apple
StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
@PeteSeattle I would really love one that had a 70's candy dish vibe to it, like what google shows for "70's green color":
Maybe a tiny bit darker:
Hopefully this wasn't an obnoxious post.
Maybe a tiny bit darker:
Hopefully this wasn't an obnoxious post.
herbivore21
Well-Known Member
Man this new equipment is super exciting! Looking forward to seeing which new goodies and ideas you have when you return!Greetings!
What an action packed week the past 2 weeks has been.
We now have our laser up and operating. Still a bit of tweaking to do to get it dialed in, but oh boy, to just see the first laser cut caps come out of that machine. Well, it more than made my day.
Here it is.
So then there has been the follow up with the vendors from the IMTS show. Really cool things ranging from new and improved cutting tools, robotics, and some of the most advanced manufacturing machinery I have ever seen. In fact, as I write this I am on a plane on my way to LA to go look at some of it right now.
When I think about what this type of equipment could mean for Dynavap, I get excited. Then here comes what I think is the best part.
Development! Probably one of my favorite things about this project is how it enables me to focus on design and development, and at the same time it is now providing me access to technology and materials I have only dreamed of being able to work with. What will I be able to do with an 8 axis CNC machine? More titanium and other exotic materials? Only time will tell.
And check out this OmniVap with a blasted mouthpiece.
There are some really exciting things coming!
Thank you everyone for helping me get to this point.
Cheers,
George
An 8 axis CNC and more metal options has me drooling: I'd love to see some 14mm ti vong mouthpiece tips designed to be compatible with the dynavap range, seems like this should be something possible with all this new equipment? More metal options for components would be wonderful!
With all the time I spend using my omni, I find myself frequently thinking that a titanium on glass adapter style mouthpiece attachment would be very welcome for those big cloudy concentrate hits
Farid
Well-Known Member
So remembering some posts here on FC, I made a vapcap heating station out an Ecig I usually use to vape hash. I am blown away by how well it works. It removes all the skill/technique you need when using a torch. Now it never overheats or under heats, and i can hit it while heating if I want.
PeteSeattle
Well-Known Member
@PeteSeattle I would really love one that had a 70's candy dish vibe to it, like what google shows for "70's green color":
Maybe a tiny bit darker:
Hopefully this wasn't an obnoxious post.
Looks avacado to me. I have jade but its not the 70s vibe (posted photo way back somewhere).
I'll look for avocado next time I'm buying colored glass tubes. I agree, I like that 70s vibe ... my childhood!
Bad Ocelot
Well-Known Member
Interesting, care to share some pics? I've got a ton of various ecig gear laying around & my current torches aren't ideal. Got a triple & dynastash ordered but I don't think it's shipped yet.