• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

TeeJay1952

Well-Known Member
@16jps Turn unit to 6.5
Wait 1/2 hour (it's hard but necessary)
Grind weed (better weed better results)
Suck like straw to fill.
Lightly and I mean lightly tamp stem (airflow is king)
Insert stem count to 10 and puff (draw like sucking milkshake)
Hold breath and count 10. Slowly exhale.
Stir stem
Repeat as necessary.
 

Vapor_Eyes

taste buds
The stuff was still mostly green.

The draws weren't that great. just visible.
If your stuff was green and vapor was barely visible I would bet your E-Nano wasn't up to temp yet. The E-Nano can be used after about 3 minutes in a pinch, but it really will work best after at least 10 minutes, 20-30 is ideal.

I probably use it after only heating it 3 minutes more than most people, because I turn it off when I leave the house. Especially when it was my only vape sometimes I had no choice. It can work, and get you medicated, as you've experienced. It also doesn't do the best job at extraction, which is why your herb is still green.

I have two recipes for quick use. The first is the 3 minute recipe, only for emergencies. Turn the nano to 10 for 2 minutes, then down to 7.5 for a minute. You will be able to get decent effects and vapor with a slow draw speed. Try not to hit it back to back, give it 30 seconds to recover.

The 5 minute recipe is actually pretty damn good and will get you almost 100% performance. Turn the nano up to temp 10 for 3 minutes, then down to .5 over your usual temp for 2 minutes. So I do temp 10 for 3 minutes and temp 7 for 2 minutes after that, because I'm usually around 6.5.

Once that session is over it's very important to turn the dial to your preferred spot, or you will have the temp too high and possibly combust. That's the big problem with turning it to 10. I accidentally combusted, just barely, a couple times at first because I left it at 10 for 5 minutes and then went to hit it and forgot to turn it down.

The moral of the story is leave your log on as much as possible. This will ensure optimum satisfaction and extraction! :D

Keep your hands warm!
 

NikeReebok23

Well-Known Member
I have reached the pinnacle of vapor consumption! Here is my Nano paired with my UFO bubbler (that I helped design).

wH300kS.jpg

Never been a big fan of the whip But I love the bubbler would love to get one like that and maybe adjust the mouthpiece with something glass, where may I ask did you get that nice glass piece?
 
NikeReebok23,
  • Like
Reactions: ataxian

Vapor_Eyes

taste buds
Never been a big fan of the whip But I love the bubbler would love to get one like that and maybe adjust the mouthpiece with something glass, where may I ask did you get that nice glass piece?
You've been asking about glass a lot. Two recommendations:

http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-902#post-1016331

dhgate.com

I have the D020-D from sunshine store on dhgate, it looks similar to the one you posted, but has a few differences.
 

16jps

Well-Known Member
If your stuff was green and vapor was barely visible I would bet your E-Nano wasn't up to temp yet. The E-Nano can be used after about 3 minutes in a pinch, but it really will work best after at least 10 minutes, 20-30 is ideal.

I probably use it after only heating it 3 minutes more than most people, because I turn it off when I leave the house. Especially when it was my only vape sometimes I had no choice. It can work, and get you medicated, as you've experienced. It also doesn't do the best job at extraction, which is why your herb is still green.

I have two recipes for quick use. The first is the 3 minute recipe, only for emergencies. Turn the nano to 10 for 2 minutes, then down to 7.5 for a minute. You will be able to get decent effects and vapor with a slow draw speed. Try not to hit it back to back, give it 30 seconds to recover.

The 5 minute recipe is actually pretty damn good and will get you almost 100% performance. Turn the nano up to temp 10 for 3 minutes, then down to .5 over your usual temp for 2 minutes. So I do temp 10 for 3 minutes and temp 7 for 2 minutes after that, because I'm usually around 6.5.

Once that session is over it's very important to turn the dial to your preferred spot, or you will have the temp too high and possibly combust. That's the big problem with turning it to 10. I accidentally combusted, just barely, a couple times at first because I left it at 10 for 5 minutes and then went to hit it and forgot to turn it down.

The moral of the story is leave your log on as much as possible. This will ensure optimum satisfaction and extraction! :D

Keep your hands warm!
I think you're right. I'm optimistic.

Waiting to come down a little more before giving it another go lol

Thanks for the advice :love:

:peace:16jps
 

NikeReebok23

Well-Known Member

Qwin8

Vaporist
Do i need to worry about the warranty or is it automagical all i get is a error both on my pc and mobile
I had a walnut back in 2014 that they allowed me to return so i could pay for some unforeseen medical expenses
i ordered a premium walnut this time. i also got some 18mm GONG both kinds. I have been play with it for awhile getting pretty good results lately
 

ataxian

PALE BLUE DOT
Do i need to worry about the warranty or is it automagical all i get is a error both on my pc and mobile
I had a walnut back in 2014 that they allowed me to return so i could pay for some unforeseen medical expenses
i ordered a premium walnut this time. i also got some 18mm GONG both kinds. I have been play with it for awhile getting pretty good results lately
yMX2Bvr.jpg

MEDICAL MARIJUANA (CANNABIS) with a NANO is CIVILIZED I break glass everyday.
Sorry! NANO all day!
 

CarolKing

Singer of songs and a vapor connoisseur
Hi everyone got the j hook out loaded with some Grand Daddy Purple in the nano GonG. What's simmering tonight in your nano tonight?

Playing with the temp, amounts of product and distance from the oven can help with some nice milky clouds. Makes sure your cannabis is cured well. If not let your bud sit out a day or so.

Edit
@Qwin8 you will need to warranty your enano separately through Epicvape. There's a place where it's says warranty registration I believe.

I bought this j hook through Planetvape it was $20. I bought 2 at the time. I've had this probably 6 months and haven't broken it yet.

 
Last edited:

NikeReebok23

Well-Known Member
Hi everyone got the j hook out loaded with some Grand Daddy Purple in the nano GonG. What's simmering tonight in your nano tonight?

Playing with the temp and distance from the oven can help with some nice milky clouds. Makes sure you have product that's cured well. If not let your bud sit out a day or so.

Edit
@Qwin8 you will need to warranty your enano separately through Epicvape. There's a place where it's says warranty registration I believe.


Omg I Think I might have to order one right now,

I alternate between using it dry with provided long stem and wet with the 18mm gong, I like hitting it out the water pipe because this way the herb is held upright instead of falling into the e-nano.

When I use the long stem I'm holding both items horizontal, not a big pain but not a big comfort either,

That J-hook looks so sweet and I feel that would be a much nicer and easier to hold setup

Been looking online, I think I might bite the bullet and go to a local hs, I never could wait for stuff smh

Now when I"m using it Dry I don't go past 7.5

Usually through the water pipe it'll be around 7.2-8 depending on if I want a big hit or a few small hits,

I've combusted by accident probably 4 times already lol, slow learner, in any case like many people have said DON'T use it on 10, or 9, mine combusts on those for sure lol.
 
Last edited:

BT Bean

Bredda Gravalicious
Hey, first post here. I’ve been smoking daily for 45 years, almost exclusively via small handheld pipes. I was reading up on various strains and their respective terpene profiles when I saw comments talking about the taste of vapor vs smoking. I thought ‘I didn’t know there were flower vapes’, so I googled it.

A week of solid reading on FC, Reddit and critic sites (I haven’t even touched my preorder of Mankind Divided), and I’m here. I’m interested in taste and getting medicated. I so wanted the Firefly because I just want to fill a pipe, savor it, and move on, but the draw on it scares me. I almost bit on the Evo, so close, but the fragility scares me as I’m a klutz, and I don’t want to mess with water, never cared for bongs at all. The fussing with the stems on the nano is my only concern I guess, but it seems to have it all with very few problems. Also, how difficult to share with my wife? We each get our own stem?

Anyone here want to talk me out of it? If not, suggestions for accessories? Should I get the GonG just in case I take leave of my senses and want to mess with water, and if so, which one? Any discount codes or tips?

Right now I’m thinking ‘who needs combustion’, but as soon as possible I’d like to say (without coughing up a lung): Fuck Combustion!
 

NikeReebok23

Well-Known Member
I would get the GonG but don't upgrade for the glass screen stems, I did and I don't like them,

I prefer the original with metal screen, easier to clean and possible to adjust,

I prefer using the dry stem for simplicity, but I did just finish off with a water pipe hit so its good to have both.
 

BT Bean

Bredda Gravalicious
Thanks. The glass screen sounds like a good idea, but it does seem everyone suggests the adjustable. Some of the videos with water look cool (pun only somewhat intended), but all that glass around and fussing with it never interested me. But I may be open to it in the future, I like to have options, which is one of the attraction of this device.
 

CarolKing

Singer of songs and a vapor connoisseur
I love the glass fixed screen stems but they do break easier than the adjustable ones. I've had 3 and when dropped they break right at the fixed glass screen. When the adjustable stems fall sometimes they will withstand a break. I've only broken 1 adjustable stem vs breaking 3 of the fixed stems. I don't have any more fixed glass stems and I don't think I will buy anymore.

Edit @Qwin8 you can email epicvape. You could also give @ACE OF VAPE a PM. He checks in here often. They could be having some technical difficulty.
 
Last edited:

Qwin8

Vaporist
@CarolKing : it say this after i fill out the form Fatal error: Uncaught exception 'phpmailerException' with message 'Invalid address: ' in /home/epickvap/public_html/epicvape.com/wp-includes/class-phpmailer.php:946 Stack trace: #0
but from what i Read here I assume Ace of Vape will Take care of any reasonable issues.

I order it after i had to send my evo in for repairs
when i first got it my loads seem more green than i wanted. all the outlets I want use with it are on the same circuit & I am not use to the warm up time or time for the temp to change
leaving it on at least 5 all the time and forgetting in the 6 - 8 range getting good hit through waterpipe. mainly getting the 2 hits but once or twice i've been able too get over 3-4 milky tasty hits.
 
Qwin8,

16jps

Well-Known Member
OK I finally figured it out.

It was a mixture of needing to pack just a little more and letting it heat up for a good 20 minutes - 1/2 hr. Now its going much better :love: cant wait to try it through the GonG stem on my D020-D which is on the way from sunshinestore.

It's so beautiful too. The maple burl has the obvious circular patters, as well as these waves of silvery, shiny colour on one side, and beautiful notches on the other...truly a work of art. Tank you @ACE OF VAPE

(knocking on wood to make sure I'm not jinxing myself...Hey! I can do that with my nano... #MULTITASKING)

:peace:16jps
 

Vapor_Eyes

taste buds
@16jps, I'm glad to see that it's working out for you. It really is best to leave a log running, in fact, that's part of the charm of it in my opinion. I always know it's ready for a hit instantly, not even a 5 second heat up time. :love:

I recently ordered a Nano Dry Stem Spiral Stand and E-Nano Urchin Stand from delta3dstudios.com. They are both great and keep my cannabis from spilling out when I set my stem down in the middle of a session.

I also got a couple of 14mm GonGs to use with my new recycler. My urchin stand is holding an adjustable stem, two 14mm GonGs, two 18mm GonGs, the e-pick, and a golf pencil for tamping. There's even an extra slot for a dab tool when using concentrates.

Dg8uXIi.jpg
 

Reflections

Well-Known Member
Welcome to FC @BT Bean and the nano forum. We all love our nanos here. I only use the stems with my nano, and my husband and I have our own stems, we have an assortment of them. I love the fixed glass screen ones. I pull lil nugs off and fill it and tamp it lightly and set it on the heater and let it heat sink for few then pull on it, works perfect for us. We turn the nano on and let it heat up for at least 20 minutes before use. Im thinking of ordering some more fixed screen stems and buying more silicone sleeves for them that epic offers, put one on each end and perhaps if drop them they wont break as easily.

Use the code: 'FCfreeship' for free shipping on all orders to US, Canada and UK.

Dont forget to go the the epic site and register for the warranty also.

Very nice urchin stand you got there @Vapor_Eyes
 

BT Bean

Bredda Gravalicious
Thanks for the welcome!
Welcome to FC @BT Bean and the nano forum. We all love our nanos here. I only use the stems with my nano, and my husband and I have our own stems, [/USER]

Ah, that’s what I was thinking. Actually, there’s going to need to be some effort on my part to garner that WAF (Wife Approval Factor) as at this point she thinks I’m insane. So I awant to make the experience as smooth as possible for her (which of cours means I’ll need to really ‘practice’ with it beforehand).

I love the fixed glass screen ones. I pull lil nugs off and fill it

I was considering this also. It works well? I thought I read about others doing it this way, I suppose I should get at least one glass screen stem.

I am so psyched, this past week has opened up a whole new world- and I don’t even have a vape yet. I think I must have VAS by proxy.
 

Reflections

Well-Known Member
Everyone has their own techniques..some grind and hold their stems up and turn sideways so the herb doesnt fall out..but my way works well for us.

The flavor of vaping with the nano will knock your socks off,plus the amount you use will definately conserve your consumption as opposed to smoking and some other vapes. Also your lungs will thank you for vaping now,so much healthier.

We all have VAS here..lol.. I purchased 5 vapes and the nano was the last one I purchased 2 or 3 years ago and its my daily driver and only one I use now!
 

BT Bean

Bredda Gravalicious
The flavor of vaping with the nano will knock your socks off,plus the amount you use will definately conserve your consumption

I’m all about the terpenes, and my consumption is through the roof, so this is exactly what I want.

Also your lungs will thank you for vaping now,so much healthier.

It’s been quite some time since my lungs had any reason to thank me.
 

Vapor_Eyes

taste buds
I’m all about the terpenes, and my consumption is through the roof, so this is exactly what I want.
I've tried a lot of vaporizers. Not nearly as many as some people have. The nano is still the best when it comes to flavor. I honestly don't think it can get any more pure.

I always thought I was a flavor guy when I combusted. Now that statement sounds completely absurd. :rofl:

I also used primarily small handheld pipes, I liked glass spoons. I could get 3-4 sessions out of one bowl, I didn't consume a lot. The nano cut my consumption by more than half. It literally paid for itself because of this.

I've never been a big water guy but I like that the nano gives you that option. I bought a cheap Chinese bubbler, a D020-D, and it's fun to use occasionally, but it didn't convert me to the water side.

Recently I bought a recycler from JoDa Glassworks and it's converting me fast. Watching the vortex spin is hypnotic, and makes my anxieties melt away. It's very therapeutic. :science: I think I might be developing a case of RAS (Recycler Acquisition Syndrome).

My recommendation to you is to tread lightly when it comes to water, it is easy to get in over your head. :lol:

Since you're a handheld pipe guy a J-hook would be a very nice option for you. You would need a GonG to use your nano with one. There's actually a beautiful j-hook by JoDa Glassworks in the classifieds right now:

image_zpsdytppz6g.jpeg


image_zps6m3ffhxn.jpeg


That one is 14mm. Here's the link to the thread, there are matching GonGs for sale too:

http://fuckcombustion.com/threads/j...gs-and-amber-purple-ray-gun-dabber-250.22583/
 
Top Bottom