StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
That would be such an amazing thing to pull off, *ding* and it pops up like toast.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
t-dub
Vapor Sloth
Yes because then we are back to batteries again, which kinda defeats the purpose of having this vape, at least for me.
Milkytime
Well-Known Member
Well my omnivap arrived been playing around with the glass body looks really cool with the glass. Really liking the airflow 90% closed so I don't even have to use the carb and can just use it hands free once heated. Works awesome for downtime while playing games I just need to stop for the few secs to heat a cap. Dead too early in a round of Counter Strike just heat a vap cap and puff while playing hands free. Loading screen taking too long time for a vap cap.
I got a couple XL condenser to swap on to my ti woody and make an OG a S. Took the regular condenser off the woody and got the reclaim out of there with hemp fiber and tried it in vap cap for first time WOW. I may have to use this for dabs more often it worked much much better than I ever expected.
Got one of my many VonGs I ordered (still more to come) I'm liking the stem VonG you can use it dry or with water easily.
Big thanks to George and Matt for sorting out 3 pending orders and getting me at least part of what's ready. Matt did an awesome job sorting me out so I could benefit from vap capping now rather than later. He also threw in some CCD and some extra O rings and clips I really appreciate it as I had lost some O rings and look forward to trying the CCD. Matt did such an awesome job of communicating with me yalls Coustumer Service is the best I have ever experienced with any business ever.
It surprises me all the time that somthing so small but very well designed has pretty much dethroned most of my other vapes. I pretty much only lust for more dynavap products nowadays. I forget to charge batteries or plug in vapes.
I got a couple XL condenser to swap on to my ti woody and make an OG a S. Took the regular condenser off the woody and got the reclaim out of there with hemp fiber and tried it in vap cap for first time WOW. I may have to use this for dabs more often it worked much much better than I ever expected.
Got one of my many VonGs I ordered (still more to come) I'm liking the stem VonG you can use it dry or with water easily.
Big thanks to George and Matt for sorting out 3 pending orders and getting me at least part of what's ready. Matt did an awesome job sorting me out so I could benefit from vap capping now rather than later. He also threw in some CCD and some extra O rings and clips I really appreciate it as I had lost some O rings and look forward to trying the CCD. Matt did such an awesome job of communicating with me yalls Coustumer Service is the best I have ever experienced with any business ever.
It surprises me all the time that somthing so small but very well designed has pretty much dethroned most of my other vapes. I pretty much only lust for more dynavap products nowadays. I forget to charge batteries or plug in vapes.
Copacetic
Somewhere North of The Wall
I know what you mean, but also kinda like the fact that a VC can be heated with anything INCLUDING electricity.
An electric stash would definitely contribute somewhat to stealth, and appeals to me, but seems un-achievable without a fairly large increase in size.
We don't have to choose one OR the other with the VC though, and to me that's just another reason to celebrate!
StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
Yes! I keep waiting for someone crazy to make a laser powered vape. I've gotten frustrated with torches, it's my least favorite part about torch vapes. Especially when it's bright, windy, or I want to be stealth. I love my torch vapes though.
Edit: Though I have to say the triple/quad torches work well when it's bright and/or windy for me. I know where the flames are without seeing them and they're shorter so the wind doesn't blow them off course.
Last edited:
YungLeaner
Well-Known Member
I lost my VapCap OG 
It's a tragedy how careless I am sometimes, but that little bugger got me so damn high that I'm not surprised I lost it...
I would order a Vong today, but the DEA just made an herb called Kratom that I take a schedule one federally illegal substance, so I need to stock up and buy a lot before it becomes a felony to buy it a month from now. There are hundreds if not thousands of people using this plant to avoid serious opiate addiction and stave off withdrawals. Back to heroin they go...
So now I'll look for a buyer for the Lily, and hopefully get a Vong soon.
The fucking war on drugs, man... I guess I sound like a hippy but it can really get me down on occasion. The fact that a willfully ignorant guy like Chuck Rosenberg has so much fucking power is just remarkable. Really, truly remarkable.
In Judaism there's a term called "Chillul Hashem," which refers to actions undertaken by a Jew that embarrass all Jews by association. Chuck Rosenberg is a MASSIVE Chillul Hashem. Fuck him!!!
But God bless vapcap
It's a tragedy how careless I am sometimes, but that little bugger got me so damn high that I'm not surprised I lost it...
I would order a Vong today, but the DEA just made an herb called Kratom that I take a schedule one federally illegal substance, so I need to stock up and buy a lot before it becomes a felony to buy it a month from now. There are hundreds if not thousands of people using this plant to avoid serious opiate addiction and stave off withdrawals. Back to heroin they go...
So now I'll look for a buyer for the Lily, and hopefully get a Vong soon.
The fucking war on drugs, man... I guess I sound like a hippy but it can really get me down on occasion. The fact that a willfully ignorant guy like Chuck Rosenberg has so much fucking power is just remarkable. Really, truly remarkable.
In Judaism there's a term called "Chillul Hashem," which refers to actions undertaken by a Jew that embarrass all Jews by association. Chuck Rosenberg is a MASSIVE Chillul Hashem. Fuck him!!!
But God bless vapcap
Sand
Flirting with Combustion
One 18650, a switch? It could be milaana simple, because of the cap. Then again, I'm definitely not an EE. It would be at least a little heavier and bulkier, but if it was still pocketable, it would be an *amazing* stealth vape.I know what you mean, but also kinda like the fact that a VC can be heated with anything INCLUDING electricity.
An electric stash would definitely contribute somewhat to stealth, and appeals to me, but seems un-achievable without a fairly large increase in size.
We don't have to choose one OR the other with the VC though, and to me that's just another reason to celebrate!
Stevenski
Enter the Dragon
The only reason I keep my Air is for when out & about in public. I was out to dinner last Friday in the city & there is no way I could heat the VapCap without arousing suspicion whereas I turned on the Air & pocketed it whilst I made my way outside to use it. I have no need for a Dynastash but if there was a Dynastash heater module I would be in like Flynn as that would cover all my bases.
collegeKid101
Well-Known Member
Just copped some screens and a lighter from puffitup in preparation for my vapcap, anything I'm missing (besides the butane and the vape
)? Also any tips on how to replace the ceramic screen with the flowermate one? I know I saw a post about it and how to do it but I can't seem to find it again, so even a link to the previous post would suffice haha as you can tell, the wait is killing me!
)? Also any tips on how to replace the ceramic screen with the flowermate one? I know I saw a post about it and how to do it but I can't seem to find it again, so even a link to the previous post would suffice haha as you can tell, the wait is killing me!@Stevenski
I really like the idea of a dynastash heater. An inductive coil and a battery. Better yet if you find the right timing for the heating and program it in. Don't even need to listen for the click. Press the button in your pocket, wait a few seconds, pull out the cap and inhale. Doesn't get much more stealth than that.
@Vapor_Eyes
What are you using to connect your Omni to water? Looks sleek.
I really like the idea of a dynastash heater. An inductive coil and a battery. Better yet if you find the right timing for the heating and program it in. Don't even need to listen for the click. Press the button in your pocket, wait a few seconds, pull out the cap and inhale. Doesn't get much more stealth than that.
@Vapor_Eyes
What are you using to connect your Omni to water? Looks sleek.
Vapor_Eyes
taste buds
Here you go:Just copped some screens and a lighter from puffitup in preparation for my vapcap, anything I'm missing (besides the butane and the vape
I don't like plastic vapes! I love the Omni's TI and Stainless constuction.
Plus it's about versatility. You gotta love the ritual of rotating and torching your vapcap, but sometimes it's too conspicuous.
jrcmang
Well-Known Member
Just copped some screens and a lighter from puffitup in preparation for my vapcap, anything I'm missing (besides the butane and the vape
I know @Vapor_Eyes just addressed this but I actually did this today and ran into some issues. Getting the screen out was no issue. But holy fuck I was not prepared for the frustration that would ensue from not being able to get that retaining ring seated. I didn't have chopsticks, skewers, or a dowel. I removed the screen with the condenser and that wasn't working for seating the ring. I thought I was getting close using some toothpicks but that fucking screen kept flipping on me.
Put everything away and came back to it this evening after getting some advice from @Squiby. Thought it was only proper to get nice and medicated off a cap on the OG before continuing…lol. Well I saw a pencil and looked at the eraser end and thought that would be perfect. Pulled the eraser and used the hollow metal end to seat the retaining ring. Applied a little pressure and it was good to go. So fucking simple. Wish I had of thought of that this afternoon. Keep in mind this was just a basic yellow #2 pencil. Oh and the reason I didn't just use an unsharpened pencil is because I didn't have one.
One other question, I was reassembling my Ti coco woody and was looking at the condenser o rings. I'm almost positive I read a post from George or someone else explaining how the orings were different sizes. With my XL condenser there are three o rings. The body, bottom mouthpiece, and top mouthpiece. The top mouthpiece and body orings are smaller and the same size. The bottom mouthpiece one is the larger one correct? Just want to make sure I have that in the right order.
Last edited:
PeteSeattle
Well-Known Member
Do you all prefer to use concentrates in the Ti tip or the OG? Tried it out of the OG and wow. I'm a bit shy about gumming up my Ti tip. Would love to hear people's experience.
Oh, and to add on to the unplugged nature of the VC, I haven't even touched my grinders.
@jrcmang I think you got the o-ring thing right.
Oh, and to add on to the unplugged nature of the VC, I haven't even touched my grinders.
@jrcmang I think you got the o-ring thing right.
Yeah I know what plastic the pax has is safe and separated from the airpath - I'm not really bashing the pax, just having some fun.
I do prefer the simplicity of the Omni and knowing EXACTLY what materials are in my vape. Most of the vapes I use are the ones I can take apart and see exactly what's going on.
I do prefer the simplicity of the Omni and knowing EXACTLY what materials are in my vape. Most of the vapes I use are the ones I can take apart and see exactly what's going on.
Vapor_Eyes
taste buds
It's funny, those are some Pipe Bits I saw at a local smoke shop recently while looking for torches, pipe cleaners, and other stuff. I picked them up because they were only $2 for 2 and they looked like something that might come in handy later to use with water. I figured I would eventually find a vape that worked with them. So I bought them and threw them in my vape accessory box.
I was using a different adapter for my 18mm piece, and that adapter doesn't fit my new 14mm recycler. I figured I would try those pipe bits and they fit like a glove. Seriously like they were made for the OmniVap to use with 14mm pieces.
I would have posted here but I've been holding off because they're made of live rubber and I'm not 100% sure it's safe to vape from. I'm 99% sure it is but I don't want to recommend something unless I'm 100%. I wasn't paying attention and thought they were silicone when I bought them.
From what I could find online live rubber is just natural rubber (latex) and should be fine in the vapor path. One website did say to avoid solvents and oils if possible. I'm sure that means iso is out of the picture for cleaning which is fine. The part about oils concerns me a little bit.
These pipe bits are recommended for use with smoke which is even hotter than vapor so they should be safe. Than again, smokers aren't necessarily concerned about safety of materials in the airpath.
I plan on using my OG mouthpiece for water in the future, I should have it soon. At least until I can find out how safe the live rubber is.
https://www.amazon.com/gp/aw/d/B009...r+pipe+bit&dpPl=1&dpID=31lj9xvxd-L&ref=plSrch
Last edited:
collegeKid101
Well-Known Member
Thanks guys! Does that ring you're talking about go around the screen or behind it? I'm guessing it'll be pretty straight forward with a pencil and the vape actually out in front of me so I have a visual of what you're talking about
jrcmang
Well-Known Member
Thats one of the greatest things about the VC….no need to grind herb for a good vape. I'm finally divorced from my grinder. Its so great just breaking a nug up a little and loading up the bowl. Very old school…brings me back to my days of youth. The no grinder feature is very liberating IMO.
Edit: @collegeKid101 the screen gets reinserted through the bowl end and the ring goes on top of that to hold it in. It will all make sense when you look at it.
Vapor_Eyes
taste buds
The ring goes on top of the screen, towards the cap, not the mouthpiece. Take a close look at the Ti tip before you disassemble anything. Maybe even take a picture with your phone.
Really it's very simple and straightforward.
collegeKid101
Well-Known Member
Thanks everybody! I'll report back with epic tales of cloudy success as soon as I get my hands on that bad boy. The hype is real!
jrcmang
Well-Known Member
Wanted to report a few differences I've noticed between the Ti woody and OG. Decided to give my woody a go again after installing the TI flower mate screen from PIU. The airflow is slightly improved. Enough to make a difference though. My session was killer and the draw was easier. Still not OG easy but an improvement for sure over the ceramic screens. I think this woody is about to be elevated to EDC status…loving this thing with the screen mod.
Another difference I've noticed is that my TI seems to edge the OG out in how evenly it roasts bowls. It seems like every bowl comes out looking the exact same and my number of cycles are more consistent. This could also be due to the ability to spin the woody as I'm heating it. I will occasionally get hot or undercooked spots with my OG if I'm not really concentrating on my rotating technique.
I also prefer using a single torch with the TI as opposed to a triple torch for the OG. The single was giving me hotspots on the OG no matter how well I rotated it seemed like. Switched to a triple scorch torch I picked up off amazon and results have been much smoother. More even roasting and longevity of the load. With the TI its the opposite. The triple doesn't give me hot spots but it seems to heat the cap up too fast therefore the temp is actually a little low and the vapor isn't kicking. Switched to a single and it works far better IMO. Takes a little longer but you get higher temps and more vapor production. No charring either…just even dark brown abv. I've yet to combust or even char with the TI. With the OG I have to be pretty careful…most especially heating past the click. With the TI i can heat 1-2 seconds past the click and no issues. Oh, and I'm using a Zico single flame torch I snagged from PIU when I bought my sticky brick. This thing is pretty powerful and with the vapcap i keep it set to about medium. With the sticky brick I always used it on the low setting…bumped it up for the vc though.
Anyways, I'm baked as fuck off some GSC. Just wanted to report a few differences I've observed between the TI and OG. On to vaping a few more caps then bedtime. Love the vapcap!
Another difference I've noticed is that my TI seems to edge the OG out in how evenly it roasts bowls. It seems like every bowl comes out looking the exact same and my number of cycles are more consistent. This could also be due to the ability to spin the woody as I'm heating it. I will occasionally get hot or undercooked spots with my OG if I'm not really concentrating on my rotating technique.
I also prefer using a single torch with the TI as opposed to a triple torch for the OG. The single was giving me hotspots on the OG no matter how well I rotated it seemed like. Switched to a triple scorch torch I picked up off amazon and results have been much smoother. More even roasting and longevity of the load. With the TI its the opposite. The triple doesn't give me hot spots but it seems to heat the cap up too fast therefore the temp is actually a little low and the vapor isn't kicking. Switched to a single and it works far better IMO. Takes a little longer but you get higher temps and more vapor production. No charring either…just even dark brown abv. I've yet to combust or even char with the TI. With the OG I have to be pretty careful…most especially heating past the click. With the TI i can heat 1-2 seconds past the click and no issues. Oh, and I'm using a Zico single flame torch I snagged from PIU when I bought my sticky brick. This thing is pretty powerful and with the vapcap i keep it set to about medium. With the sticky brick I always used it on the low setting…bumped it up for the vc though.
Anyways, I'm baked as fuck off some GSC. Just wanted to report a few differences I've observed between the TI and OG. On to vaping a few more caps then bedtime. Love the vapcap!
natural farmer
Well-Known Member
No extra costs through customs man! I think George declares smaller value for his packages as well for that reason... I think either PIU or Dynavap would be great sources.
Stevenski
Enter the Dragon
Bear in mind that the reason the websites state to avoid solvents & oils is because they can weaken the structure of the latex creating small holes. Strangely this is highly relevant to infection control & cross contamination such as aged care solutions or condoms (that is why it is a big no no to use baby oil as a lubricant with condoms).
For what your application is I would be more concerned with a rubber taste rather than heat degradation & if you gave the tip a quick wipe down with Iso there won't be any real issue.
Vapor_Eyes
taste buds
Thank you so much for the info. Technically the vapor doesn't even pass over the rubber, but there is a possibility for the vapor to contact the rubber in the 14mm joint if it drifts up.
By the time the vapor would reach the rubber it wouldn't be very hot in the first place.
I'm not too worried about it. There is no latex smell or taste. I've even tried using it as a mouthpiece just for the fuck of it. I had no problems with flavor when I did that.
Last edited: