• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

t-dub

Vapor Sloth
does the vapcap heating component (that we torch) lend itself to inductive heating?
Well since the cap is magnetic it should respond to inductive heating. How much is unsure because of materials and other criteria. Inductive cooktops transmit a large amount of energy fairly quickly. I would be very careful putting all of that energy into a small VC.
 

Copacetic

Somewhere North of The Wall
This is no mere vape.
This is a shadowy artifact of myth and legend, forged in lands far across the seas from Titanium, Damascus and Ebony.
An eldritch instrument of spiritual transcendence.
It moans with desire to slake it's herbal thirst upon your stash.
Wielding it will corrupt the soul of any righteous man.

Lucky I got it then eh? :evil:

0


George is a master mage, a vape-smith without equal.
Tremble before his might and majesty.
:bowdown::bowdown::bowdown::bowdown::bowdown::bowdown::bowdown::bowdown::bowdown::bowdown:
 

Milkytime

Well-Known Member
@vapen00b the double car garage is what I have been dreaming of for a while. I really doubt I would get use out of the herb stash cuz I really like my jyarz for on the go. Do you think it's wide enough for 3caps or would it have up be a bit wider to accommodate the vong too.
XL slot
Regular slot
14mm vong stem
3 magnets

That is what I would request
 

Vapor_Eyes

taste buds
THAT....is screaming hot, mate. I'm thinking its a reasonably small piece (and I mean that as a benefit).

Custom built or is there a link I can look at it?
It's eight inches tall (20 cm). Perfect size for my hand:

GmUucH6.jpg


It was a collaboration between @VaPeD&CoNfUsEd & @coojoglass (Instagram- @joda_glass). JoDa is busy with a large retail order so he is not currently doing custom pieces, I hope he starts up again soon. Send him a message, he might have an extra piece to sell you. Check out his thread, there's a lot of amazing work in there and it's cool to watch the progression. And make sure to add it to your watched list so you see when new pieces like this are available:

http://fuckcombustion.com/threads/joda-glassworks.13915/

The piece works great with my OmniVap, it is very low diffusion so there's virtually no loss of flavor. And the omni can whitewall it easily. I'm so glad I ordered a Ti Burly VonG stem, it's going to be a great combo.

Here's a video of it functioning, I plan on making my own video but it might take some time:

https://www.instagram.com/p/BJhV8p0gT81/

And I can't even show the best part, because I don't have a UV light yet. The marble accents are Blu-V so they glow under a UV light:

bc2ZhmB.jpg
 

little maggie

Well-Known Member
Beautiful Woody! Cocobolo with wenge stash?

@vapen00b

It looks like you got that gorgeous Burl anda B&W Ebony. Tell us more about the custom stash...

d3fkszi.jpg




I have used my VC with both wax and shatter. Most often I just place it on a bit of flower, but I have also used a tiny bed of degummed hemp fiber or even suspended a tiny screen in the bowl.

Using a bit of flower takes the least effort. I only use this approach for bedtime meds...
What wood are these? My ti woody s is in the mail but I love the contrasting wood.
 
little maggie,
  • Like
Reactions: Vapor_Eyes

Vapor_Eyes

taste buds
I'm curious how other people use their Dynavap products with water, especially VonGs. Most of the time I like to feather the carb. I usually have my OmniVap set to max restriction or slightly less. I usually feather the carb when using it dry too, I find it satisfying to do and it creates a thicker, more robust vapor.

I'll have to play around with the adjustable airflow and see how that affects performance through water.

What about everyone else? Do you like to leave it wide open, feather it, or plug it when using with water, and why?

I seem to remember hearing about an o-ring mod to create hands free restriction on the carb, I could see that being handy with water. I'm sure I could rig that up on my omni.
 

PeteSeattle

Well-Known Member
With out water I prefer to carb the VC until it feels like I'm pulling on a joint ... like barley covering when I can feel the draw with my finger mixed with inhale.

With water I prefer a tight draw.
 
Last edited:

vapen00b

Many vapes & accessories. Always happy to help
Oh wow, a double garage stash? Is there a chamber on both ends? It looks like there is... How does it work? Have you got any more pictures? Sorry for all the questions, but it looks so pretty....

Peace


Yeah, it's a double garage, double magnet bocote dynastash XL. Nope, it's two garages on one side - only one lid to screw. In between the garages there's a small compartment for a (dabber) tool. George was so fantastic and modded the tool to have a different end (don't do dabs) so I can adjust my torch lighter flame with it. Freakin handy.

I will post further pics for you, am on the go right now.


Beautiful Woody! Cocobolo with wenge stash?

@vapen00b

It looks like you got that gorgeous Burl anda B&W Ebony. Tell us more about the custom stash...

d3fkszi.jpg

Yes, it's a wonderful G2M2 (double garage, double magnet) bocote xl DynaStash. It's perfect for my needs as I use to have an external material container.
A tip for all stash owners: take a foam ear plug and cut it down a bit and throw in there as a base/buffer. George had this idea and it's perfect to have your beauties parked without any rattling or moving. :)


@vapen00b the double car garage is what I have been dreaming of for a while. I really doubt I would get use out of the herb stash cuz I really like my jyarz for on the go. Do you think it's wide enough for 3caps or would it have up be a bit wider to accommodate the vong too.
XL slot
Regular slot
14mm vong stem
3 magnets

That is what I would request

Well, 2 garages is no problem, but 3 are not feasible with the current design, I would say. There's the lid screw right in the middle of the lid and there's just enoug space for the dabber tool compartment. Maybe if the lid was screwed onto the side that might work? Or two doors from the sides?
I try to post pics of my stash later so you can get a better pic of it.

What wood are these? My ti woody s is in the mail but I love the contrasting wood.

see below :)

I think we were looking at (from left to right):
- Black and White Ebony Vapcap
- Burl Vapcap
- Bocote Dynastash

Right on, mate! Thanks :)
VCs are xl (w/ mouthpiece)
Burl is Amboyna
and G2M2 dynastash xl


Have a wonderful weekend everyone!
:peace:
 

lookhigh

FC member
@lookhigh & @Stephen

Were you able to get through to Dynavap?

If not, have you checked your junk mail/spam folder?
Yes he personally contacted me through PM seems my original messages did not get through?

I must say i love this thing more and more, so small and simple yet could replace so many large and expensive vapes.
 
Last edited:

Steph

Well-Known Member
@lookhigh & @Stephen

Were you able to get through to Dynavap?

If not, have you checked your junk mail/spam folder?

yes, I got a PM from George:

Please send a message to matt@dynavap.com
We have been having a few issues with the contact form. You can share this with anyone you like.

Thank you,

George


Matt answered my mail a few minutes later so problem solved!
 

Baron23

Well-Known Member
Well, I took advantage of George's offer of $10 off an OG and now have another coming to me. My first OG had the older style eye dropper looking condenser but I suppose the new one will have the new style??

I still love my OG. Really looking foward to Dyna putting out the Ti diffuser screen for my Ti Woody as I think the design works brilliantly in the OGs.

Cheer
 
Last edited:

vapen00b

Many vapes & accessories. Always happy to help
Hi guys,


here the g2m2 stash pics.
There would be room for 3, if the holes were a bit narrower (as you can see the hole is quite a bit wider than a VC, but necessary for a VonG I think). So no VonG but 3 VCs might be possible with a different lid hinge/design.
MJQZ3HV.jpg

gNWQjQS.jpg


Hope this helps!:)


Have a nice Saturday guys
:peace:
 

greenextinguisher

Well-Known Member
Well, I took advantage of George's offer of $10 and OG and now have another coming to me. My first OG had the older style eye dropper looking condenser but I suppose the new one will have the new style??

I still love my OG. Really looking foward to Dyna putting out the Ti diffuser screen for my Ti Woody as I think the design works brilliantly in the OGs.

Cheer

You'll be happy to know they seem to be shipping immediately. I received mine in a few days and took it for a quick spin this morning. I don't know much about which condenser is which but it does have the new diffuser screen.

I love it. Great from the first hit. I haven't read this thread much in a while, but something must have stuck. I picked it up and worked it like a pro on the first try. Excited to try the omni w/ Ti tip and its future revisions.

Definitely a different vape profile than anything else in my arsenal. The only other vape I have that employs a significant amount of conduction is the crafty. This is definitely unique to that as well. Not 100% sure what makes it special, but I really like it. Looking forward to using it more and will report back.

I'm using a Zico torch and really dig it. It's a single but get's the VC up to temp very quickly. It is way too big for on the go, so I may shop for something very small to compliment it.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I just got my omni today and after two loads I must say I am completely impressed and completely stoned. It is a very strong high that I have come to expect from flame powered vapes but the vapcap is somehow so much more.

If a person is looking for an excellent, a perfect, zero learning curve, portable vape I would say a person cannot do any better than a vapcap. This is very possibly the best designed personal herb vape ever without exaggeration. I sprung for the omni because of what @natural farmer (thank you) had to say, man was he ever right.

The other thing I noticed right off the bat is this thing is ultra efficient. You can't help but conserve.

I have already got my buddy interested who is searching for >>> exactly this. The vapcap hits all his needs.

Thanks George for your brilliance and for sharing it with the world. :clap:

Nice to see you here man, interesting you went right to omni, starting at the top. I am still actually preferring my humble OG somehow... But again omni just so so sexy... Also in my experience learning curves are totally subjective, and any on demand vape like this does have them, depends on the person and the useage variables. It is definitely easy to just get gone with it regardless though technique can lead to a more optimal experience.

I admit, I don't use it often enough, but I just pulled out my Omni.

Used it with ratchet's silicone adapter and my new glass from Joda, and my god. Beautiful, tasty clouds, perfectly even abv. This thing is a godsend. So simple, so perfect.

I still find I get best results with my double-flame scorch. Tri and quad flames are too easy to combust with, and single flames just take so long I always worry I'm gonna miss the click.

Ah maybe I should pick up a double to try too, the single actually does work well for the OG though yeah takes longer but big clouds. That JoDa glass is stunning, always love seeing his stuff

I'm curious how other people use their Dynavap products with water, especially VonGs. Most of the time I like to feather the carb. I usually have my OmniVap set to max restriction or slightly less. I usually feather the carb when using it dry too, I find it satisfying to do and it creates a thicker, more robust vapor.

I'll have to play around with the adjustable airflow and see how that affects performance through water.

What about everyone else? Do you like to leave it wide open, feather it, or plug it when using with water, and why?

I seem to remember hearing about an o-ring mod to create hands free restriction on the carb, I could see that being handy with water. I'm sure I could rig that up on my omni.

I think maybe starting to draw closed, then slowly opening to let more in will result in thick vapor, even once fully opened drawing til it clicks. Feathering does work too, and yeah depends bc a slow steady suction draw with it fully open could lead to thick clouds, I am sure it largely depends on bubblers too since they will offer different draw capabilities.

And hey don't even need a VonG WonG, every OG is its own GonG SonG with a 14mm female (probably both male joints too?) It is much easier to reach the carb here than on my OmniVonG actually (a regular VonG is probably easier) and again I like the glass bowl and CCD. An ideal for me would be if it just had a glass 18-14mm tip to seal perfectly like a bowl... Maybe some day, or maybe I just need more Ti tip practice

Mcj2n0P.jpg


This bubbler also offers a very smooth pull, so you can do any draw required for any vape, it's perfect for pure convection, pure conduction, and everything in between.

I don't know about best, so subjective, but it has to be one of the cheapest hard hitting on demand vapes ever, with purest materials and simpler learning curve than some other old cheap torchies... The $25 deal does have me wanting to share my code with everyone I know
 
Last edited:

collegeKid101

Well-Known Member
The Ti woody can be chosen with a single or double Crown.
Can someone please explain what is a single or double crown?
Thanks

See the silver ring between the chamber tip and the wood? That's called a crown, and double crown simply means that there will be one in between the body and the mp as well. The Ti Woody S comes double crowned as standard so look at a picture of the Woody S if you wanna see what it looks like :tup:

Hopefully that helps! I know that was pretty confusing for me when I saw it the first time too
 
Top Bottom