Discontinued The Woodeez Vaporizer/Diffuser
- Thread starter highendvapes
- Start date
-
- Tags
- log
BlueHoo
Well-Known Member
My Woodeez arrived last Thursday. I've been using it ever since while my other pieces are gathering dust. I love that I can keep the Woodeez on all the time. The efficiency was one of the main features that led me to buy it. I still can't believe how efficient it is! A couple of steams and I'm feeling much better. I can see it being my go to vape. Now if I could just get my wife to give up her beloved Dugout. 
Todd was great to deal with and was quick to answer my questions. On a scale of 1-5, I give it a 5.
Todd was great to deal with and was quick to answer my questions. On a scale of 1-5, I give it a 5.
max
Out to lunch
Yep. If you're like me you may feel the need for a big DBV hit once in a while, but you can't beat a log vape for satisfying 'dosing'. Sit yourself down under some good lighting, to view your exhales, and you may be surprised how many hits you get. Best tip I've got for added efficiency-don't pack your bowls too tightly. I can't tell you how many times I've thought a bowl was done, only to empty out the top half, or stir with a pointy stir tool, and then get several more good hits.
Hide it from her for about a week, and feed her only vapor. That may get her to switch for good.
steiner666
Serial vapist
Well, my wdz arrived today. 
It's smaller than i expected, which is exactly how i expected it would be.. so really I wasn't surprised at all in the end was I? I can say right off the bat that it's very nice and performs well with small loads. I vaped 1 stem and i'm to exactly the point where i need to be, off of what would have been 1/10th of joint. As i anticipated, a fully loaded stem is even less than the minimum amount i normally had to load in the VB mini wand with my SSV (we'll say about 1/2-2/3 the size) and far less than what i prefer to use in my HA.
The hits are also exactly what i was look for as well. I like big lung-crushing clouds and over-indulgence just as much as the next human being, but I've always sought after cost-effective use of my herbs. You can feel and taste the hits and there is visible exhale on the first few that are slightly visible in normal lighting conditions, but they really light up if you blow them over the top of a lamp or flashlight (something i regularly do with any vape), which is exactly how i think it should be for best efficiency. I'm with the group of minds that think thick, visible exhale is just wasted THC. So really i ended up getting around 6 hits i'd say, and there is still some left to squeeze out with the HA later on (after i amass like 25-50 spent stem's worth of abv lol).
But it's not all just unicorns flying around, shitting sunshine and rainbows.
There are some flaws with the unit, both in design and minor, fixable cosmetics. When i say flaws in design, it really applies to the other log style vapes as well. Well, actually, its really just "flaw" - and i'm referring to there not being a screen inside the top of the unit to begin with. I had some herb that was a pretty fine grind (for use in my VG) that i loaded up and, especially after the first hit or two, i noticed that when i removed the stem there was as much herb sitting on top of the screen (that i took the precaution of insert in the top as i waited for the unit to heat up) as there was still remaining in the stem. Im going to assume that, even though the instructions say to finely grind, that there is such a thing as too fine. I think if the chunks would have been a bit bigger, like from a 3-4 piece grinder instead of a 2, that they would have held themselves in there a littler better. But still, there would have been some that still fell out. Especially if you removed the stem between hits, and/or dump it out to stir (more like shuffle i guess) the herb around to examine it. The main thing i guess is that there's no good reason NOT to have a screen in there.
The minor cosmetic defects i referred to are just that, just a few rough spots in the wood around the top and back by the power jack. nothing some fine grit sandpaper can't fix. Also, the top isn't quite perfectly level, it slopes slighting one direction. nothing some coarser sand paper can't fix. I think i'll just post a pic or 2 after i venture out into the frigid winter hell to grab some sandpaper and get these couple things touched up. I personally don't mind having to put a little bit of finishing touches on something like this, so it doesnt really detract much from my satisfaction of the vape, but i guess it could be a big deal to some people. I'm used to having to lap a heatsink or CPU heatspreader before installation when i order those, this isnt much different.
Also, the aroma cup works great. I have some eucalyptus going right now, and its not too overpowering but detectable for sure.
Overall I'm really happy with it, and feel my $125 was well spent. Just looking at the tiny pile of herb i dumped out of the stem and glancing at the clock and seeing how much time has passed (an hour+) since that first stem tells me that the wdz is going to accomplish exactly what i was wanting it to. It's going to help me really evenly spread my herb out over a longer period. The only things i could think of that other people might consider a negative are the facts that you just dont get massively huge rips like you can off of some vapes (but thats kinda the purpose of so many aspects of log vapes design, if you get one of these vapes for that purpose you're going to be trying to shove a round peg through a square hole) and that it doesn't extract the full range of actives from the herb by any means. I don't know the actual operating temps, but i would compare it to stopping around 360-370F on my HA, which is just about exactly where i would stop during daytime vapes anyway. Also, not a problem for me because i plan on revaping in HA, and wouldnt be a problem for someone who makes edibles or QWISO.
Definitely a great vape overall
It's smaller than i expected, which is exactly how i expected it would be.. so really I wasn't surprised at all in the end was I? I can say right off the bat that it's very nice and performs well with small loads. I vaped 1 stem and i'm to exactly the point where i need to be, off of what would have been 1/10th of joint. As i anticipated, a fully loaded stem is even less than the minimum amount i normally had to load in the VB mini wand with my SSV (we'll say about 1/2-2/3 the size) and far less than what i prefer to use in my HA.The hits are also exactly what i was look for as well. I like big lung-crushing clouds and over-indulgence just as much as the next human being, but I've always sought after cost-effective use of my herbs. You can feel and taste the hits and there is visible exhale on the first few that are slightly visible in normal lighting conditions, but they really light up if you blow them over the top of a lamp or flashlight (something i regularly do with any vape), which is exactly how i think it should be for best efficiency. I'm with the group of minds that think thick, visible exhale is just wasted THC. So really i ended up getting around 6 hits i'd say, and there is still some left to squeeze out with the HA later on (after i amass like 25-50 spent stem's worth of abv lol).
But it's not all just unicorns flying around, shitting sunshine and rainbows.
There are some flaws with the unit, both in design and minor, fixable cosmetics. When i say flaws in design, it really applies to the other log style vapes as well. Well, actually, its really just "flaw" - and i'm referring to there not being a screen inside the top of the unit to begin with. I had some herb that was a pretty fine grind (for use in my VG) that i loaded up and, especially after the first hit or two, i noticed that when i removed the stem there was as much herb sitting on top of the screen (that i took the precaution of insert in the top as i waited for the unit to heat up) as there was still remaining in the stem. Im going to assume that, even though the instructions say to finely grind, that there is such a thing as too fine. I think if the chunks would have been a bit bigger, like from a 3-4 piece grinder instead of a 2, that they would have held themselves in there a littler better. But still, there would have been some that still fell out. Especially if you removed the stem between hits, and/or dump it out to stir (more like shuffle i guess) the herb around to examine it. The main thing i guess is that there's no good reason NOT to have a screen in there.
The minor cosmetic defects i referred to are just that, just a few rough spots in the wood around the top and back by the power jack. nothing some fine grit sandpaper can't fix. Also, the top isn't quite perfectly level, it slopes slighting one direction. nothing some coarser sand paper can't fix. I think i'll just post a pic or 2 after i venture out into the frigid winter hell to grab some sandpaper and get these couple things touched up. I personally don't mind having to put a little bit of finishing touches on something like this, so it doesnt really detract much from my satisfaction of the vape, but i guess it could be a big deal to some people. I'm used to having to lap a heatsink or CPU heatspreader before installation when i order those, this isnt much different.
Also, the aroma cup works great. I have some eucalyptus going right now, and its not too overpowering but detectable for sure.
Overall I'm really happy with it, and feel my $125 was well spent. Just looking at the tiny pile of herb i dumped out of the stem and glancing at the clock and seeing how much time has passed (an hour+) since that first stem tells me that the wdz is going to accomplish exactly what i was wanting it to. It's going to help me really evenly spread my herb out over a longer period. The only things i could think of that other people might consider a negative are the facts that you just dont get massively huge rips like you can off of some vapes (but thats kinda the purpose of so many aspects of log vapes design, if you get one of these vapes for that purpose you're going to be trying to shove a round peg through a square hole) and that it doesn't extract the full range of actives from the herb by any means. I don't know the actual operating temps, but i would compare it to stopping around 360-370F on my HA, which is just about exactly where i would stop during daytime vapes anyway. Also, not a problem for me because i plan on revaping in HA, and wouldnt be a problem for someone who makes edibles or QWISO.
Definitely a great vape overall
max
Out to lunch
I believe the MZ comes with a screen, so your complaint should just be with this one and the PD. Having half the bowl load come out is very much NOT the norm. While I'm sure that can happen if you load loose and jar it at all when setting it down, I've never lost anywhere near that much from a bowl in over 2 1/2 years of daily use with this design. I don't like to lose herb down the rabbit hole though, so a DIY screen can be a good idea. Personally, I've just adopted a vaping position that puts the bottom slightly higher than the top, and that works fine for me. Once the bowl has been subjected to a hit or two, I can set it down easy with tube inserted and not lose anything.
steiner666
Serial vapist
max said:
Yeah i used my vapeworld 4-piece and it went much better as far as herb staying in place. It was just that the stuff i was putting in the first time i used it was ground too finely, like how i would grind for a LB. using a little bit larger pieces made everything stay in place better. There seems to be a balance to packing the stem tight enough for things to stay put but not to the point where its hard to draw on. Its not even a big deal if and when herb does spill down onto the screen because it doesnt scorch or anything and if i pull the stem before i stop inhaling it will pick it all back up anyway.
I just still dont get why wdz and pd dont have screens in there as part of the design. Even if its something that happens just once in a blue moon, no one wants that lingering taste of scorched bud that would accumulate eventually i'm sure.
OC513
Dabaholic
when I got my WDZ I put a screen in it right away as it seemed logical. Tom from PD has stated that he believes turning it upside down and giving it a tap on the bottom will clear out anything that falls in, so a screen is not needed.....also that if something does get past the screen it will be harder to get out. Both theories hold water imo.
laoxinat
Well-Known Member
steiner666 said:laoxinat said:HEV, Are you willing to extend the FC deal until a bit after the holidays? You know, to help us spend our Christmas cash?I have been looking at the PD for a long time, didn't even know the WDZ existed but for this board! We have a VaporBros box-type which has served us well for several years now, but I'm getting nervous that it will die and leave us (NOT)high and dry. MUST HAVE BACKUP. Oh and HI!! This is my first post
Well, since this is an anniversary month sale i think you'll probably still have 5 days after xmas to place your order. Should be enough time, no?
Well, the first I'd be able to order would be 1-9-11 because if my emplyoer's unorthodox pay schedule. Eh, I'll PM HEV and see what we can work out.
malawigold
Landrace Advocate
Just got my black walnut woodeez today... big sessions going on with the zong tonight so will edit soon for some primo milk pics!!!
thanks for the fast service Todd my WDZ was shipped Monday and it was the post office's fault it didn't come till thursday (could have came wed )
thanks for the fast service Todd my WDZ was shipped Monday and it was the post office's fault it didn't come till thursday (could have came wed
)
steiner666
Serial vapist
My current dynamic duo
Im loving how they compliment each other - the WDZ helps me conserve like i normally can't with the HA and do lower-temp vaping throughout the day, and the HA is great for group settings and just extracts every last drop like none other, something I can't really say the WDZ excels at, imo. Together I can have the positives of both without worrying about the negatives
Also, I, unfortunately, had my first experience with medium-low grade (basic commercial shit around here, like look out for seeds!) herb with the WDZ. Did it work? Yeah, but nowhere near as well. I was getting less than half the hits and a stem just wasnt getting me to where i needed to be. Needless to say, the WDZ works best with higher grade bud. I hate when ppl say that tho, because ANY vape works best with better herb lol. It's just that the difference between performance with dank and performance with mids/commerc is even greater than with most vapes. Like, instead of high quality bud lasting twice as long (which is what i found to normally be the case with most vapes) as mids in the wdz, it can be as much as 4x longer than your average blah herb.
Im loving how they compliment each other - the WDZ helps me conserve like i normally can't with the HA and do lower-temp vaping throughout the day, and the HA is great for group settings and just extracts every last drop like none other, something I can't really say the WDZ excels at, imo. Together I can have the positives of both without worrying about the negatives
Also, I, unfortunately, had my first experience with medium-low grade (basic commercial shit around here, like look out for seeds!) herb with the WDZ. Did it work? Yeah, but nowhere near as well. I was getting less than half the hits and a stem just wasnt getting me to where i needed to be. Needless to say, the WDZ works best with higher grade bud. I hate when ppl say that tho, because ANY vape works best with better herb lol. It's just that the difference between performance with dank and performance with mids/commerc is even greater than with most vapes. Like, instead of high quality bud lasting twice as long (which is what i found to normally be the case with most vapes) as mids in the wdz, it can be as much as 4x longer than your average blah herb.
redheadedeskimo
Well-Known Member
My Woodeez is finally going to be here tomorrow! I was getting worried since it shipped on 12/10 and the tracking info didn't update until the fourteenth, and didn't say anything helpful until the eighteenth, but that is the fault of USPS, and Todd replied to all my paranoid emails, haha. I'll probably post my review tomorrow if I can pull myself away from my new vape!
Just a bump to let folks know that there is only 4 days left to take advantage of the Woodeez $125 anniversary special. After the first of the year, regular pricing on Woodeez kits will be changed and the FC discount will no longer be in effect so be sure and get one of the best log vapes out there at an unbeleivable price while the opportunity exists. Thanks everyone for making this a great first year and an unforgettable anniversary. 
finchrock24
Proud MMJ Patient
Well I am very happy and excited to say that I just finished placing my order with High End Vapes! I can't wait to receive the unit and have no doubt that it will meet my expectations. I have set the goal very high, but I am almost positive they will be reached with this unit.
The first thing I am going to do after I break the unit in (speaking of, is there any specific inital start up procedures I need to do?) is to go to the dispensary and buy 1.0 gram of a top shelf bud (magazine quality) and I am going to measure how much goes into each stem and evaluate the effects. I basically want to see how long I can make a gram last...and still get a satisfactory buzz out of all the sessions. The gram will be the same strain and the buds will be of very similar quality. Its as control as I can get. We will see just how many bowls this particular vape can produce with 1g.
I plan on doing the exact same test again through a water adapter as well. I will also try and wrangle up some other opinions from some colleges (i don't think getting some friends together for some vaporizer testing will be the hardest task i have faced).
Very excited for my little project.
The first thing I am going to do after I break the unit in (speaking of, is there any specific inital start up procedures I need to do?) is to go to the dispensary and buy 1.0 gram of a top shelf bud (magazine quality) and I am going to measure how much goes into each stem and evaluate the effects. I basically want to see how long I can make a gram last...and still get a satisfactory buzz out of all the sessions. The gram will be the same strain and the buds will be of very similar quality. Its as control as I can get. We will see just how many bowls this particular vape can produce with 1g.
I plan on doing the exact same test again through a water adapter as well. I will also try and wrangle up some other opinions from some colleges (i don't think getting some friends together for some vaporizer testing will be the hardest task i have faced).
Very excited for my little project.
aesthyrian
Blaaaaah
steiner666 said:
I wondered the same and asked Todd if he offers a screen over the heaterport as a option and his response was "I don't put a screen in the heatport as if it were to dislodge, it could cause a short." so there ya go. I should be getting my WDZ in the next week or so, can't wait!
shantytown007
Well-Known Member
Chubby said:I hope to get mine next week. Then I'll go pick up a quarter of White Widow & see how fast I can vape it. Should be a tough assignment considering I'm 2 months herb free.
Good luck! I've tried a 1g test on a log vape a few times, and always lose count somewhere between .5 and 1g. I did manage to do a successful .5g test- 17 stems, 58 hits
I highly recommend a counting system, like tossing coins in a cup, or reloading all stems at the same time (so you only have to remember to write down the number once every 3-5 stems).
More on my (non-scientific) test here: http://www.fuckcombustion.com/viewtopic.php?pid=55736#p55736
steiner666
Serial vapist
Well, todays already a shitty day. Woke up and, as has become the normal routine, sat down at my desk to use my WDZ and discovered it was cold. Checked and made sure the adapter was still plugged in at both ends and it was. Tried moving it to a different outlet and its been about half an hour and still no sign of heat. I'm about to try a third outlet, but I'm pretty doubtful that it will work either. No rattling or anything if i shake it, no breaks or anything in the wire. It was working fine when i went to bed last night, now its just not.
steiner666
Serial vapist
lwien said:
these must be the most fragile adapters in the world then, because i'm obsessive about making sure my cords and cables arent subjected to any sort of stress, especially on the plug ends because thats where 98% of the breaks happen IME. So I have an extension cord running to the top of my desk, where i plug the wdz adapter in, and its sat there (with no tension on it or anything and out of reach of my cat) ~2ft from my wdz since I got it. Other than me picking the wdz up and hitting it and then setting it back down, it hasnt been moved around at all. the wire still has the folds in it from how it was coiled and packed, ffs. I wish i had a multimeter at home, I would just check for continuity in the plug.
I already emailed Todd about the problem. Its been a couple more hours and a few outlets later, still no sign of heat so i'm sure somethings fucked.
At least i had the HA to fall back on
think i'm a bit too smashed a bit too early in the day tho. Whatever the problem with the wdz, hopefully it can be sorted out quickly, for my stash's sake.
max
Out to lunch
Although a break in the wiring is by far the most common issue with a busted AC adapter on a log type vape, they are not immune from just plain crapping out. Any electrical device is susceptible to failure. I bought several extra adapters from Jameco (part # 10081), for spares and temporary vaping locations.
steiner666
Serial vapist
max said:
Yeah i think i'm going to stop by radio shack tomorrow and see what they have. I just need a 12v 1000mA transformer, right? Hopefully i can get a replacement sent to me too, that way i can have a spare.