JoeMama
Well-Known Member
You say, "by a 1/4th", I assume you mean make it 25% shorter, and that would be just about right, IMO.
The thing is to not have it SO short that the whole tool then rotates through the ring.
Custom 3D printed Widgets - Delta 3D Studios
- Thread starter Delta3DStudios
- Start date
You say, "by a 1/4th", I assume you mean make it 25% shorter, and that would be just about right, IMO.
The thing is to not have it SO short that the whole tool then rotates through the ring.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Just chiming in again to say the scoop n poke is still an incredible product, ideal for GH, great for Milaana HI Daisy and Mist too, ultimate vape tool is still very very true 
2clicker
Observer
Last edited:
Lol looks awesome, although sadly the model's licenses say it is for noncommercial use - I can't publish that on my store.
*However* if someone needed me to print something from thingiverse, they could always PM me a link and I could give them a quote for printing
Bdubbdiblets
Well-Known Member
Delta 3D love!! And Jyarz and hopper of course...
Baron23
Well-Known Member
Hi Ratchett - I have you're doob tube funnel and while it works sort of on GH, its big enough to slide down the GH oven too far so you have to support it underneath with the hand that holds the GH. Its good enough of a fit that herb won't leak out, but its a PIA enough that I just ordered a GH tube and some other accessories from you.
Love the studio, love your enthusiasm, and love what you are going in creating these aftermarket items.
Cheers
Thanks for the feedback! As a matter of fact I just got my hopper on Friday and tested the doob tube funnel on my hopper and noticed the same thing.
I wonder if I should make a Doob Tube Funnel 2.0 which has a notch internally to hold the hopper nicely, and still hold the doob tube?
I truly believe everyone should follow their passion in life. If you hate your job, find another one (or make your own as in my case). Life is too short to spend it being miserable! 
scottg402
Well-Known Member
Truer words were never spoken! Leaving the BS of corporate America and pursing my passion in the vaporizer industry is the best decsion I ever made!
Baron23
Well-Known Member
Hi Ratchett - I think if you can make a dual purpose funnel, for doob tube and fit the GH, that would be VERY keen. I imagine a ring at the top of the lower part of the funnel just to keep it from sliding down would do it, not much change, eh? And they can be sold for either purpose or both.Thanks for the feedback! As a matter of fact I just got my hopper on Friday and tested the doob tube funnel on my hopper and noticed the same thing.
I wonder if I should make a Doob Tube Funnel 2.0 which has a notch internally to hold the hopper nicely, and still hold the doob tube?
I will look for it on the website in the future!
StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
I actually just got some different tubing to make a mod for my apollo and finally decided to try this and it totally worked. It's 1/4 i.d. silicone which I actually just put into a song which goes into a 18mm whip adapter and then into a bubbler. It's amazing, the only weird thing is I kept forgetting to cover the carb hole. Another of the million ways I've used the songs. Please ignore the dirty glass.
HerbieVonVapster
Well-Known Member
Really enjoying the items from Ratchett. The grasshopper stand and funnels makes it so much easier to fill the tiny bowl opening on the grasshopper. That makes life easier for me with my hand issue.
I also got one of the battery sleeves for the charger. Man need another one now. Really surprised how much I reach for it when I go to charge the battery.
Nice to have everything in matching stands got a black mighty stand along with a black grasshopper stand. Looks awesome on the desk besides the firefly2 dock and my cement zaps black adjustable box. Helps with the little ocd in me. Nice to glance over and see everything in its right place.
The battery 3-1 sleeves are great lot easier to toss in my murse and go.
Great items thanks Ratchett
I also got one of the battery sleeves for the charger. Man need another one now. Really surprised how much I reach for it when I go to charge the battery.
Nice to have everything in matching stands got a black mighty stand along with a black grasshopper stand. Looks awesome on the desk besides the firefly2 dock and my cement zaps black adjustable box. Helps with the little ocd in me. Nice to glance over and see everything in its right place.
The battery 3-1 sleeves are great lot easier to toss in my murse and go.
Great items thanks Ratchett
Vapor_Eyes
taste buds
Just wanted to pop in here and say thanks for the great products. I've made several orders with @Ratchett including one custom order. Every order went perfectly, with fast delivery and good service. My custom order was exactly what I asked for.
One of my orders qualified for a free B-stock water adapter. I didn't have any of the vapes listed, but I figured the Crafty / Mighty Mouthpiece Waterpipe Adapter (14mm) might work with my Grasshopper. Sure enough, it works just fine. You have to press the Grasshopper against it to get a tight seal but I actually like that aspect. I figured I might as well mention it works for all of you people buying Grasshopper accessories while the deal is active.
I'm looking forward to the next inventions from Delta 3D Studios.
One of my orders qualified for a free B-stock water adapter. I didn't have any of the vapes listed, but I figured the Crafty / Mighty Mouthpiece Waterpipe Adapter (14mm) might work with my Grasshopper. Sure enough, it works just fine. You have to press the Grasshopper against it to get a tight seal but I actually like that aspect. I figured I might as well mention it works for all of you people buying Grasshopper accessories while the deal is active.
I'm looking forward to the next inventions from Delta 3D Studios.
Last edited:
Afternoon All!
Phew, what a crazy past few months. I continue to work on multiple products at the same time. At any point I've got dozens of ideas and projects floating through my mind. Recently a fellow FC member loaned me a Volcano vape which I've begun developing some accessories for (coming next month I hope!)
Right now I'm proud to announce that I've finished my RBT Zion/Milaana basket screen press (which also works for other tubes including a standard 18mm male-2-male adapter)
Phew, what a crazy past few months. I continue to work on multiple products at the same time. At any point I've got dozens of ideas and projects floating through my mind. Recently a fellow FC member loaned me a Volcano vape which I've begun developing some accessories for (coming next month I hope!)
Right now I'm proud to announce that I've finished my RBT Zion/Milaana basket screen press (which also works for other tubes including a standard 18mm male-2-male adapter)
StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
The song never stops impressing me. Used it to hook up a daisy/brick and hercules to a bubbler.
This one... totally doesn't look super phallic...
This one... totally doesn't look super phallic...
Baron23
Well-Known Member
HI Ratchett - a suggestion...just a thought....a loading funnel for the Vapcap. I believe you have a VC and can see where some would love to have a very small loading funnel (vice trying to load it like a bat or suck it up into the chamber).Afternoon All!
Phew, what a crazy past few months. I continue to work on multiple products at the same time. At any point I've got dozens of ideas and projects floating through my mind. Recently a fellow FC member loaned me a Volcano vape which I've begun developing some accessories for (coming next month I hope!)
Right now I'm proud to announce that I've finished my RBT Zion/Milaana basket screen press (which also works for other tubes including a standard 18mm male-2-male adapter)
Cheers
Sure I can certainly do that!
I've been thinking about a few different Vapcap accessories for a while now. I'll start a list of VC accessories now so I can upload a batch of them at one time.
Vapor_Eyes
taste buds
Perfect timing, I just ordered a Vapcap!
While we're offering suggestions, how about a mini spiral stand for E-Nano stems. Like the Grasshopper stand but with a bigger diameter to fit the mouthpiece side of the nano stems.
Are you referring to the standard dry nano stem (round tube with screen in it)? I could do that
Vapor_Eyes
taste buds
Yeah, the standard dry nano stem. I just did a rough measurement of the mouthpiece side, and it seems very close to 14mm. Is there any way you could test if the nano dry stem would fit in the center hole of your 14mm Urchin Stand? That is one beautiful piece!
Just tested, sadly it doesn't fit the 14mm Urchin stand (maybe 1 mm too small). However I can easily modify the design for you - simply order the 14mm urchin stand, and in the order notes request a custom middle slot to hold the dry stem for the E-Nano - I'll take care of you
Vapor_Eyes
taste buds
Yes, I know you will take care of me, thanks for all the help!Just tested, sadly it doesn't fit the 14mm Urchin stand (maybe 1 mm too small). However I can easily modify the design for you - simply order the 14mm urchin stand, and in the order notes request a custom middle slot to hold the dry stem for the E-Nano - I'll take care of you
Should I do the same for the mini spiral stand? I'm thinking I want one of each.
Yes, I know you will take care of me, thanks for all the help!
Should I do the same for the mini spiral stand? I'm thinking I want one of each.
If you want
I personally kept my dry wand in a honeycomb stand for a while - just make sure you add a note to the order so I know what's up
Vapor_Eyes
taste buds
_WaxPayne_
Well-Known Member
Just came to say awesome store and work dude Just got into 3d printing and your products look killer 
Just got into 3d printing and your products look killer