• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

BabyFacedFinster

Anything worth doing, is worth overdoing.
Carol and Ataxian - Some real sweet glass. :tup:

That heady piece looks like something from Healthstone glass.

I just got back from an overnight trip. While I do appreciate having some good portables for road trips, it was so nice to come back home to the nano. Just awesome, sweet flavored hits every time. You can't beat the consistency of every single hit.

Thank you Mr. nano :spliff:
 

ataxian

PALE BLUE DOT
Carol and Ataxian - Some real sweet glass. :tup:

That heady piece looks like something from Healthstone glass.

I just got back from an overnight trip. While I do appreciate having some good portables for road trips, it was so nice to come back home to the nano. Just awesome, sweet flavored hits every time. You can't beat the consistency of every single hit.

Thank you Mr. nano :spliff:
The NANO is the best value known to civilization!
 

ataxian

PALE BLUE DOT
Carol and Ataxian - Some real sweet glass. :tup:

That heady piece looks like something from Healthstone glass.

I just got back from an overnight trip. While I do appreciate having some good portables for road trips, it was so nice to come back home to the nano. Just awesome, sweet flavored hits every time. You can't beat the consistency of every single hit.

Thank you Mr. nano :spliff:
EvMEQcY.jpg


CIVILIZED
 

CarolKing

Singer of songs and a vapor connoisseur
What's in your Enano tonight? Was working out in the yard earlier today. Sitting down to relax the muscles. I went to the chiropractor this morning. I was careful bending today. I'm using some ice right now.

I have a nice strain that is called Loctite, it's a hybrid - it's half Gorilla Glue and half something else, I think it's called Mt Rainier strain. It's sticky like Gorilla Glue. Good thing I have my SLX grinder so it doesn't stick.
I better turn on the TV, Bill Maher is on.

 
Last edited:

Dramma Lamma

Looks like a job for!
When I look at your collection I realize I'm a LOW INCOME SACK!

SORRY for being a PRICK!

Nah man, you got it wrong.

Income is not that high here.

Its that the cost of herb when you work in the MMJ industry becomes so low, well you shift your herb $$ to needless vape/glass collection.

No offence taken by the prick comment, I totally get where you are coming from.
 

Dramma Lamma

Looks like a job for!
Cost of herb low? Don't know where you live, wish I was your neighbor :cool:


Get a job in a small family owned dispensary, work your fucking ass off for 2+ years and become management by that time I'm certain you can argue for a nice level of employee pricing.

Not even kidding, your pricing scheme should be a part of your salary negotiation at nearly all times.

Everything good must come to some end I'm capitalizing on this and amassing equipment for the future, rather than spend on herb.
 
Last edited:

Shredly

Well-Known Member
I've noticed that my nano doesn't get as warm when I'm staying at one house vs the other. Would getting a vvps help and is it simple to connect with nano?
 
Last edited:

CarolKing

Singer of songs and a vapor connoisseur
Nursing a sore finger. I accidentally slammed my little finger in the sliding glass door. I've been keeping ice on it. I just put some Grand Daddy Purp in my nano stem. My finger hopefully will feel better after I finish this bowl.

I hear an echo in here.

Edit
This Grand Daddy Purple is the best I've ever had. Pinky finger feeling much better.
 
Last edited:

flotntoke

thoroughly vaped
Nursing a sore finger. I accidentally slammed my little finger in the sliding glass door. I've been keeping ice on it. I just put some Grand Daddy Purp in my nano stem. My finger hopefully will feel better after I finish this bowl.

I hear an echo in here.

Hope it helped and that you heal soon. Those buggers hurt!

Accidentally kicked my dial up tonight for first time in a few months. ARGH!! Went from 6.25 to 8.5. Felt a little warm to touch, but was just buzzing past for a quick hit. Wasn't paying attention and didn't realize it was scorching until vapor hit throat. Just about almost done coughing! :doh:
 

ataxian

PALE BLUE DOT
Get a job in a small family owned dispensary, work your fucking ass off for 2+ years and become management by that time I'm certain you can argue for a nice level of employee pricing.

Not even kidding, your pricing scheme should be a part of your salary negotiation at nearly all times.

Everything good must come to some end I'm capitalizing on this and amassing equipment for the future, rather than spend on herb.
UzPkRB3.jpg

So stoked: my dispensary has GIRL SCOUT COOKIES. SOUR DIESEL I liked however GSC is better! When I was a young gun it was free! We walk through the fields of COLAS on the way to the beach to go surfin! No Stem's or Seed's! Leaves kept the mud off our feet! I would have loved a NANO then! Zig Zag's and no Bong's. Not CIVILIZED but life was cheap!

Many KOOK'S don't know how too grow?
Actually it's easy with the right condition's!
HAWAII is a good growing environment!
 
Last edited:

flotntoke

thoroughly vaped
@flotntoke
really you feel that big of a different in tempature ? mine stays at 8 everytime i use it and i only. feel like it burning when its to close.

Oh, HELL YEAH!! I notice a difference, and sometimes use it, with 1/4 notch or less. 8.5 is combustion zone on all 3 of my nanos, and they all run just a little differently - even with me "adjusting" the dials as close to the same as I can.

Couple of reasons why I see possible perceived differences.
  1. I like VAPOR. Vapor of differing densities depending on what I want out of it and how stoned I want to be. My "clouds" are great for me, but much lighter than I see many vids of. IMO if it is still lingering in the air after a minute or so, it's a little smoky. Vapor should dissipate into the air pretty quickly unless very still and VERY humid. Pretty much the same on many of the whitewalling vids I see. Vapor is blue at its best. Smoke starts to be mixed in when you see white so dense you can't see much light through it. I can cloud up a bubbler pretty damned well, but when I can't see the downtube inside the can at all, I back off.
  2. I vape dry material. Not necessarily dusty, or even easy to crumble between fingers. You can go higher heat with moister material, but all you're getting is more water vapor (diluted vapor IMO).
  3. I keep my screens clean and my load very close. Both will intensify heat differences drastically.
  4. I can hit my 2+ hit loads over and over with slower and slower hits and it will get browner and browner, and still produce some "vapor". Nothing I really want too much (which is shy I don't usually do this), but you can squeeze something out for a while. But, I can't take it much past brown - and not even close to black - because I don't have that much heat on the load. The only time it comes close to getting "smoky" is if I leave a load on from night before and it dries out, then try to hit it too slowly the next day.
May be that your nano just runs a little cooler than mine do. Or, might be that your dial is in a different starting position. But, I've got no desire for what I'd be pulling from flowers on 8 from my nanos. And, you may love the same stuff. BTW.... concentrates are a whole different story!
 

CarolKing

Singer of songs and a vapor connoisseur
I usually use my Enano as a session vape. My sessions are around 10-15 min.
Some strains I might need temp 6 but I have other strains where I need to be at 6.5.
The dryness of my cannabis makes a difference too.

You be the judge, if your vapor seems too harsh turn your temp down.
If you aren't getting enough flavor turn your temp up.
I give it a stir about half way through.

It doesn't require a lot of cannabis to get you where you need to be.

Edit
A slow steady draw works best with the Enano.
 
Last edited:

Jimmer144

Sargeant REG
I absolutely love my Nano, i have it plugged in 24/7, turn it down to around 4.5-5 if i leave home. Just like flotntoked said, i recently realized i could still squeeze more vapor out of my loads just by making my draw much much slower. Its amazing how efficient this thing is. I have appetite issues sometimes and the Nano is seemingly the best vape for helping me regain appetite as well as cure insomnia (i sleep so well now). The first few months i owned this thing i would usually only do small 2-hit loads at a time. Now i have been trying it as more of a session vape and i am amazed. It would take me 2 full Solo bowls to get me to where 1 large packing (aprox what i pack for 1 Solo bowl) of a Nano stem gets me. All other vapes i have tried had weaknesses or i eventually get a lil sick of, or my tolerance becomes too high, but the Nano consistently does the job for me, and i can only smile when i look at it :)
 

flotntoke

thoroughly vaped
@flotntoke
i place the screen a little further down than the epick goes ,when i measure it and i never fully place the heater in their.

still learning new things with it. but i didnt knew 6.5 was the was the best temperature

Not necessarily the best temp setting for all. Varies by nano, and even more by personal preference. I've used mine in all sorts of ways with different temps, distances and everything else. For me the best - or most used I should say - is 2-3 hit load with heat very close. I even have marks on my tampers (most often a golf pencil), so I can keep the distance between heater core end and load at less than 2 mm. If through a bubbler I'm usually a hair above 6.25 or so. Dry a bit below (6.1?) or sometimes as low as 5.5. This is MY favorite. No need for it to be yours. Though I will say this seems to be the most effective way to get best flavor and effect while using the least amount of material.

All those other variables come into play, too. I still think one of the primary reasons this vape is so well loved by most who try it is my way works great - but many others work great too - and you can get it to do more what you like or whatever anyone else likes easily once you get to know it.

Two things I mention above should make it work better no matter how you use it, though. Dry material (not crumbly, but pretty damned dry) and clean screens are key IME.

What I really do enjoy, and don't see as much of as we used to here, is when people share their particular methods. It's been a while since I've seen anything new (and maybe all possibilities have been explained, but I doubt it!), I usually give them a try if I haven't before. I'd have to go check the dates, but IIRC I had my nano as my daily driver for about a year before I was turned on to the 2+ hit method I now love so much. It just hadn't occurred to me to turn the heat down as low as 6.25 and move the load closer. Before that I was up around 7 with a bigger gap between load and heat, and larger loads. It worked great, and I'd probably still be doing it if not for the suggestion to try the other. So try this, and try whatever else. It's a very versatile vape!
 
Top Bottom