Sticky Brick Labs Vaporizer

That's a good question, I'm curious if the magnets would be strong enough to keep it together if it's flipped once you put it on a bubbler. I kind of doubt it, you could make a little rig to keep it solid and at worst you could just tie them together with something while you do it.

The HydroBrick will be for Hydratubes or whip use. We tried to get it to spin but Stormy nailed it, just not enough support from the magnets. We will have a unit to put directly onto a water pipe also, but it's still being tested. We are working on the HydroBrick today and should have several new things very soon.

Hey @StickyBricks - have you all thought of just making the solid half opposite the intake (the mouthpiece block) attach to the other bricks normally but with an added length of brick that goes under the bowl and intake block while still clipping to the side? This way, the gong could drop into a joint.

Oh, shit. That would rule out hydratubes though... D:

I have been using the brick more and more. This thing is too easy to pack and use on the fly. I'm getting huge rips and full extraction with a variety of torches. I can pack like enough to cover the screen and get 2-3 hits or like 2 big ones, or pack more and I can get 6-7 nice hits or kill it in 2-3 hits still, huge ones haha. The user control with this thing is crazy and the clouds are real.

The flavor has been getting better and better. At first the wood was enough to mask the taste of my herb a bit.. But this has faded more and more and today with some GG #4 I could really taste it. Packed like less than what I pack in half an ELB, small load but I got like 6 hits and the flavor maintained through the
whole session. I think the wood is fading more and though it may always be there, it has gotten to a level that does not overpower the material at all and the wood aroma is pleasant to me. I find myself grabbing this because of no heat up and the fact that I can just scoop some herb in, slap the brick together and go to town is awesome.

When the hydrabrick comes I will be in the clouds with my hydratubes thank you so much @StickyBricks for bringing this vape to all of us. I have wanted a daisy for a long time and I never thought I would have anything like it. What you have created matches or exceeds the expectations I had. This is the best butane convection vape I've tried and it is my daily driver right now. Can't wait to see what stickybricks labs comes out with next

Cheers FC
Have a great day and stay vaped

I'm definitely still in the honeymoon phase, but this is on daily driver duty for me, as well. I've been tending to do smaller loads just because one big rip off the Brick has me good for most occasions.

So my brick just came in not even two hours ago and I am loving it already! I had a bit of a learning curve with it, but I am now consistently getting sizable clouds with an amazing smoothness and taste. Now I'm thinking in the future for when I have to clean this and I know that a lot of underdog/enano users like to cook their glass stems in heated milk to make chocolate milk with before cleaning. I'm assuming the same can be done to the Brick mouthpiece?

I don't see why that would be any sort of issue at all.

I agree with some of the other posts about it being fun to use. For whatever reason to me the magnets just make it really satisfying to handle. You can extract so much so quickly too, again just satisfying. I won't rant about how pretty/simple it is for the 100th time. If I wasn't already in a committed relationship with my herbalAire it would be my desktop vape 100% of the time.

StormyPinkness said:

I agree with some of the other posts about it being fun to use. For whatever reason to me the magnets just make it really satisfying to handle. You can extract so much so quickly too, again just satisfying. I won't rant about how pretty/simple it is for the 100th time. If I wasn't already in a committed relationship with my herbalAire it would be my desktop vape 100% of the time.

Click to expand...

I feel the same about my EVO. I love my portables right now and the brick is on the top of that list. If my EVO wasn't the best vape I have ever owned this would take my desktop place as well. This thing is awesome. I still use the EVO but this is my driver right now. I'm doing a couple VapCap loads to kill this kinda empty grinder next is the brick to prepare for my Friday hope everyone is having a great day!
Cheers
Stay vaped

This thing knocks me on my ass every time I use it! I'm still trying to figure out the best way for low temp hits since i've only had it for a few days.

Does anyone else not like the finish that comes on the brick? I find that the finish is way too oily and it bothers me a lot. I tried to wipe off the majority of it and used some left over UD butter that I had. No more greasy feel and feels so much better to me.

Strange, my walnut had no such finish on it. Not a trace of oiliness....

justvapin said:

Strange, my walnut had no such finish on it. Not a trace of oiliness....

Click to expand...

How long have you had your brick? Maybe the newer ones have a finish? Or maybe mine had way too much on it. I noticed on the stickybrick website they sell a liquid finish. I'm thinking thats what was on mine.

Just got it a few weeks ago.

All the finish is the same on every unit. We make our own with a mix of mineral oil and wax, all food grade and odorless. Sorry it came too oily for you @djchexxx that is not something I've heard yet. It's possible what you felt was the wax residue, highly unlikely it was the oil, but it's certainly a possibility. If you feel like it continues to be a problem send me a pm and I can always sand it and send it back with no finish or a finish of your choice.

@lemmeadem watch for a new thread (or two) in the upcoming vape section

@everyone... Thank you! I've had a rough couple days, unrelated to work, and coming here always makes me smile. The support from this community has been incredible and I truly appreciate it.

StickyBricks said:

All the finish is the same on every unit. We make our own with a mix of mineral oil and wax, all food grade and odorless. Sorry it came too oily for you @djchexxx that is not something I've heard yet. It's possible what you felt was the wax residue, highly unlikely it was the oil, but it's certainly a possibility. If you feel like it continues to be a problem send me a pm and I can always sand it and send it back with no finish or a finish of your choice.

@lemmeadem watch for a new thread (or two) in the upcoming vape section

@everyone... Thank you! I've had a rough couple days, unrelated to work, and coming here always makes me smile. The support from this community has been incredible and I truly appreciate it.

Click to expand...

You. BASTARD. Always teasing tantalizing new options and giving just enough information.

But seriously, sorry to hear about your day(s), SB. Rest assured the FC community will back you wholeheartedly!

I swear I looked through the thread before asking this question lol. What size are the stock brick screens? I hage some 3/4 inch and they are too big.

Oogendoogan said:

I swear I looked through the thread before asking this question lol. What size are the stock brick screens? I hage some 3/4 inch and they are too big.

Click to expand...

5/8 i believe

5/8 is correct

thanks guys

I have a question for everyone: what if, you order walnut and this is what you got...


These are worm holes and I was personally glad I could save some of that, but it is slightly bumpy over the holes. I'm torn as to whether this is just cool to me, and not really sellable, or would you be happy to get something like this?

StickyBricks said:

I have a question for everyone: what if, you order walnut and this is what you got...

These are worm holes and I was personally glad I could save some of that, but it is slightly bumpy over the holes. I'm torn as to whether this is just cool to me, and not really sellable, or would you be happy to get something like this?

Click to expand...

It adds some character to your brick for sure. I dig it.

StickyBricks said:

I have a question for everyone: what if, you order walnut and this is what you got...

These are worm holes and I was personally glad I could save some of that, but it is slightly bumpy over the holes. I'm torn as to whether this is just cool to me, and not really sellable, or would you be happy to get something like this?

Click to expand...

I would absolutely love to receive something like that. I would just put a disclaimer in the details of the listing for those customers who aren't well versed in wood and are not aware of some variances.

I thinks it's cool. You could have a section of "exotics" for sale like epic vape.

I am about to order a walnut myself and actually would prefer a smooth unit......not a fan of the worm holes myself, but that is absolutely subject to personal opinion...how could I ensure to get a unit that isn't like this?

Well, it's only exotic in the sense that it has some character, but it's still just walnut. I agree it could be put in the exotic category but sold at the same price as the walnut though. Good suggestion!

@C-weed no units have gone out like this, it's the only one I have like it, and you just convinced me to not put it in with the normal retail stuff. I like @snackmaster suggestion. Thanks!