Pen Focus Vaporizer

jewcebox

New Member
Ok, so I just got the Focus Vape in the mail and have only used it a couple of times. I love it, but the video in comment #9 showed a metal bong attachment piece that did not come with the one I received. Does anyone know where I could find/buy one?
I was really hoping to use this with my glass, and I can without that attachment, but im sure it would be much smoother and easier if I had that attachment.
Thanks!
 
jewcebox,
Ok, so I just got the Focus Vape in the mail and have only used it a couple of times. I love it, but the video in comment #9 showed a metal bong attachment piece that did not come with the one I received. Does anyone know where I could find/buy one?
I was really hoping to use this with my glass, and I can without that attachment, but im sure it would be much smoother and easier if I had that attachment.
Thanks!

https://vaped.ca/products/focusvape-water-pipe-adapter

Is this the one you were talking about?
 

jdent3

Well-Known Member
Ok so I've been using my Focus for about 5 days now and it has already become one of my favorite vapes. It heats up to 200C in about 28 seconds on a full battery. The airflow is excellent and I love that you can adjust it. I have an Arizer Air and I think I like the Focus better. It heats up faster than the Air and produces more vapor. I find the Focus produces almost as much vapor as the Mighty which I also got last week. The only thing that I don't like is that the little mouthpiece screen gets clogged pretty easy. It's easy to clean though and only takes a second.
 
Last edited:

WinnipegBass

New Member
I love my Focus, have been using it daily since January.

I picked up the water pipe attachment and its awesome!

I just leave it on all the time and use it instead of the glass mouthpiece.

It is actually more functional to carry around as I found the glass mouthpiece to always come off in my pocket.

I find it easier to clean (dunk it in a cap of ISO) , no scooby snacks have gotten through the holes,no screens and filters to deal with and clean, and it doesn't heat up all that much.

Check it out!
 

jdent3

Well-Known Member
I love my Focus, have been using it daily since January.

I picked up the water pipe attachment and its awesome!

I just leave it on all the time and use it instead of the glass mouthpiece.

It is actually more functional to carry around as I found the glass mouthpiece to always come off in my pocket.

I find it easier to clean (dunk it in a cap of ISO) , no scooby snacks have gotten through the holes,no screens and filters to deal with and clean, and it doesn't heat up all that much.

Check it out!

I think I'm going to pick up a WPA for the Focus soon too. It should hit really nice out of my fbomb. I think this vape could be the new flowermate.
 

Fat Freddy

FUCK CANCER TOO !
It is actually more functional to carry around as I found the glass mouthpiece to always come off in my pocket.

I think most of us have experienced the same MP issue with any number of the PEN form factor vapes....I've found a useful solution with these:


$_35.JPG

Vape Pen Case on eBay
 

Crow

Member
Just purchased this vape. Im very new to vaping. Had a MFLB and lets just say it was cool for a week and i went straight back to a bong. Im hoping this thing is nice. Was on the Grasshopper buy and wait game but canceled it until they get it together.... Im gonna use it in Hvy Glass straight tube with shower head perc when at home and obviously without the tube when out and about. Any suggestions to a rookie vaper?
 
Crow,

His_Highness

In the land of the blind, the one-eyed man is king
Just purchased this vape. Im very new to vaping. Had a MFLB and lets just say it was cool for a week and i went straight back to a bong. Im hoping this thing is nice. Was on the Grasshopper buy and wait game but canceled it until they get it together.... Im gonna use it in Hvy Glass straight tube with shower head perc when at home and obviously without the tube when out and about. Any suggestions to a rookie vaper?

When you use water .... Do everything at Max Temp plus 30 seconds and wait at least 15 seconds between hits.

When not using water....find your sweet spot, plus 30 seconds and wait at least 15 seconds between hits.
 
His_Highness,

Crow

Member
When you use water .... Do everything at Max Temp plus 30 seconds and wait at least 15 seconds between hits.

When not using water....find your sweet spot, plus 30 seconds and wait at least 15 seconds between hits.
What do you mean "plus 30 seconds"?
 
Crow,
  • Like
Reactions: PPN

Crow

Member
Just recieved my Focus in the mail. Ran home during my lunch break to grab it. Im gonna charge the battery and was planning to do to the initial burn off here before going home. Can someone explain how to do this properly please?
 

His_Highness

In the land of the blind, the one-eyed man is king
Just recieved my Focus in the mail. Ran home during my lunch break to grab it. Im gonna charge the battery and was planning to do to the initial burn off here before going home. Can someone explain how to do this properly please?

After fully charging - With nothing in the oven....set it to high temp, and allow it to turn itself off after running at high. You could occasionally blow into the mouthpiece to force any bad air out. I would do 2 or 3 heat cycles like this and then do a few more cycles while mouth pumping inwards like a cigarette until you no longer taste anything like new electronics. This vape has little smell to begin with.

What do you mean "plus 30 seconds"?

I mean...once the temp is first reached (Temp being either your sweet spot temp or max temp for water use) wait an additional 30 seconds to allow a heat soak of the herb.

And why since mine is already producing thick clouds without to wait more.....you seem to be a high t° lover!

Like most conduction vapes of this type reaching the initial requested temp so quickly means the herb itself is not optimally heated. I'm not saying it won't produce vapor upon reaching the initial temp selected but waiting at least 30 seconds more will give the herb a chance to optimally absorb the oven's heat and should increase vapor production.

Since @Crow is new to vaping my suggestions are meant to give him a high end baseline to compare against when learning to dial in his own needs. Waiting the extra few seconds will give him a taste for the top end production at that temp and he can then scale the wait back as he sees fit ....... or he may decide he likes the extra production enough to wait the extra seconds.

For example...my Solo can produce decently at level 4 once it reaches and stabilizes the temp. The first hit will be decent but the second hit will be stronger by having absorbed more heat via the first hit and additional oven time.

Another reason for the wait is that I was able to overrun the oven temp at times. Especially when I used a bubbler. By waiting the extra seconds there will be more initial heat applied to the herb and this may lesson the overrun of the oven temp.
 

Crow

Member
After fully charging - With nothing in the oven....set it to high temp, and allow it to turn itself off after running at high. You could occasionally blow into the mouthpiece to force any bad air out. I would do 2 or 3 heat cycles like this and then do a few more cycles while mouth pumping inwards like a cigarette until you no longer taste anything like new electronics. This vape has little smell to begin with.



I mean...once the temp is first reached (Temp being either your sweet spot temp or max temp for water use) wait an additional 30 seconds to allow a heat soak of the herb.



Like most conduction vapes of this type reaching the initial requested temp so quickly means the herb itself is not optimally heated. I'm not saying it won't produce vapor upon reaching the initial temp selected but waiting at least 30 seconds more will give the herb a chance to optimally absorb the oven's heat and should increase vapor production.

Since @Crow is new to vaping my suggestions are meant to give him a high end baseline to compare against when learning to dial in his own needs. Waiting the extra few seconds will give him a taste for the top end production at that temp and he can then scale the wait back as he sees fit ....... or he may decide he likes the extra production enough to wait the extra seconds.

For example...my Solo can produce decently at level 4 once it reaches and stabilizes the temp. The first hit will be decent but the second hit will be stronger by having absorbed more heat via the first hit and additional oven time.

Another reason for the wait is that I was able to overrun the oven temp at times. Especially when I used a bubbler. By waiting the extra seconds there will be more initial heat applied to the herb and this may lesson the overrun of the oven temp.
Thank you very much @His_Highness i'll take all the advice i can get.
 

Eatrocks

Well-Known Member
I was tryin hard to buy a focus a few months ago but there was NO one shipping to the states. I have an air and this looked like a better version with the air path. The bottom layout on the focus looks so sketchy lol.
 
Eatrocks,

Crow

Member
I have the battery charging and decided to take a look at the vape. I unscrewed the mouth piece. A tiny metal screen, a piece that looks like a pencil eraser(not sure its rubber) but white with holes and a gold or copper piece with threads fell out. I assume they go into the mouth but which order? Lol sorry if this a dumb question
 

His_Highness

In the land of the blind, the one-eyed man is king
I have the battery charging and decided to take a look at the vape. I unscrewed the mouth piece. A tiny metal screen, a piece that looks like a pencil eraser(not sure its rubber) but white with holes and a gold or copper piece with threads fell out. I assume they go into the mouth but which order? Lol sorry if this a dumb question

The white piece with the 7 holes fits inside the brass looking piece. The brass piece with the screen facing downward and with the white piece facing upwards is screwed into the mouthpiece you screwed off.
 
His_Highness,
  • Like
Reactions: moondog

Crow

Member
The white piece with the 7 holes fits inside the brass looking piece. The brass piece with the screen facing downward and with the white piece facing upwards is screwed into the mouthpiece you screwed off.
Ok cool thanks again. Im sure ill be back asking something else soon
 
Crow,

Eatrocks

Well-Known Member
Any suggestions on replacement batteries? I bought the vape from PIU and they didnt have spares in stock.


Aren't they just 18650s like the air??

Amazon has tons due to all the ecig mods, i got a buncha MXJO 18650s that are 2500mAh, 13 to 14 bucks for a 2 pack. Whatever batteries u get go for high amps 35A
 
Eatrocks,
Top Bottom