• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Add moisture to the weed before vaping it

Wizsteve

Well-Known Member
i would say it's the herb moisture wont help add honey oil to it if you can or a drop of non nic e-cig juice
per bowl .

i would guess the herb was either immature or someone did a bubble hash run with it before you got it.
( use a scope check tric heads)
 
Wizsteve,

RwaNde

Member
Humidity during curing, storing and just before vape must be seperated carefully. What the OP ment is the just before vape humidity level (at least I hope so), although it's important to know what humidity level is best for well cured buds (~60% RH). I love to increase my buds humidity level from a 62% storage RH (Boveda humidity pack) to 72% before vape RH as it gives a nice flavour boost and improved cloud thickness along with increased smoothness. In case I get hold of a shitty selection, I tend go for a 6-8 hrs soaking in 84% RH, then vape it. To improve taste, I just add some lemongrass (pure love). Don't forget, not extra humidity and therefore thicker clouds but more trichomes will get you higher. It's not ideal, but hey, I can't grow mine here in the UK...

As a post note and fact, same amount from the 84% RH bud gets me higher then its 62% equilient. For some reason.
 
Last edited:
RwaNde,
  • Like
Reactions: howie105

Jokermachine

Well-Blown Member
Humidity during curing, storing and just before vape must be seperated carefully. What the OP ment is the just before vape humidity level (at least I hope so), although it's important to know what humidity level is best for well cured buds (~60% RH). I love to increase my buds humidity level from a 62% storage RH (Boveda humidity pack) to 72% before vape RH as it gives a nice flavour boost and improved cloud thickness along with increased smoothness. In case I get hold of a shitty selection, I tend go for a 6-8 hrs soaking in 84% RH, then vape it. To improve taste, I just add some lemongrass (pure love). Don't forget, not extra humidity and therefore thicker clouds but more trichomes will get you higher. It's not ideal, but hey, I can't grow mine here in the UK...

As a post note and fact, same amount from the 84% RH bud gets me higher then its 62% equilient. For some reason.
What method do you use to reach 72 and 84%RH?
 
Jokermachine,

RwaNde

Member
Ok, after a few sessions, I realised that 84% humid buds producing far darker ABV then vaped on 62%, therefore I assume more trychomes were utilized or been vaporized with higher intensity. I firmly think that increased humidy before vaping is equally increasing the potential of the plant material being vaped. I'd recommend going for a trial on this, but never ever store you buds in 84% RH room temp for more than a day. I don't know the timeframe and the exact factors for mold to grow, but better safe than sorry.
 
RwaNde,

flotntoke

thoroughly vaped
Ok, after a few sessions, I realised that 84% humid buds producing far darker ABV then vaped on 62%, therefore I assume more trychomes were utilized or been vaporized with higher intensity. I firmly think that increased humidy before vaping is equally increasing the potential of the plant material being vaped. I'd recommend going for a trial on this, but never ever store you buds in 84% RH room temp for more than a day. I don't know the timeframe and the exact factors for mold to grow, but better safe than sorry.

I don't think this is a safe assumption. First, trichomes will be pretty much vaped out with any decent vaporizer producing enough heat and being used properly. Check your ABV under magnification as compared to fresh bud (ground or not). To my eye it usually looks as if all that is left is the "deflated" trichome shell or hull, now an orangish, gold or tan color (if even this). The glistening full bubbles will be gone long before your ABV is too dark. It's not too hard to get to this point and still have pretty green ABV depending on your material, grind and vape.

Second, with the same amount of hits on the same temperature, a drier starting product will almost always leave a darker ABV. I attribute this to the plant matter heating more without moisture to keep it cooler and "roast" slower.

Perhaps you get more hits per load before it becomes unpleasant tasting or closer to combustion with the added moisture? More hits will usually lead to darker ABV, too. The added moisture adds more water vapor in each hit, so you will get more hits, or bigger hits, or both. But, that doesn't change the fact that the additional volume is simply steam with no additional actives. More of a vapor "filler", not unlike the additions of corn meal or cobs to pet foods. Nothing wrong with this. Most mixed drinks have fillers too, they just call them mixers. Personally, I almost always like a mixer in my liquor - but not so much in my vapor. But, could see how this would be beneficial to many for smoothing out hits, reducing throat irritation and stretching a session. Similar to the way I'd rather have my liquor with a mixer for pretty much the same reasons.

FWIW, I store mostly with 62% Boveda packs, then usually dry a bit on a warm surface (cable box, router, stereo amp) before grinding .

I've also found as others have mentioned above that starting with slightly more moist material will often give a better flavor profile on the first couple hits. I've always assumed this is because the added moisture slows the vaping process initially, allowing terpines to be released at a slower rate and prolong flavor. The same results can usually be had with material at the exact same RH (moisture content more accurately), by reducing the temperature a bit. In essence, by adding (or leaving) more moisture content you are reducing the initial vaping temperature without adjusting your vaporizer temperature. Damned near anything with the ability to absorb moisture will heat slower with a higher moisture content. Weed is no exception.

The reason I usually dry a bit more than 62% is that my material vapes more evenly, and I believe I am getting more of the actives and less water vapor (steam) - especially in the first few hits. Sort of like drinking your liquor neat, instead of in a mixed drink.

If you have doubts that the additional moisture is adding more steam, try a moist piece of cotton (or other easily moistened substitute) in your vape. Keep the temp a bit lower than you may for vaping, so you don't get that sometimes awful "band-aid" flavor. You can easily get huge clouds, but they don't do much for you other than sooth your throat. If still doubtful about this, try vaping moist cotton with two different moisture contents and witness the difference in vapor production - and I would assume number of hits before drying out.

More vapor? Yes. Slower vaping? Yes. More actives (or more trichomes utilized)? No, I don't think so. If you find this to be incorrect, let me know! Water is much cheaper and easier to come by than what I usually vape. But, let us know what water you're using. I don't think any I've had in the past has any trichomes or actives in it at all - unless sipped from my bubbler!

All other things being equal, I guess the added moisture could also allow for more efficient vaping depending on how much cloud chasing you are doing. You could have the same clouds, but actually take in less actives in each hit. Assume this would have to lead to less wasted active vapor from large clouds. Certainly less actives exhaled (because less taken in per hit), and possibly better absorption because I think the lungs can absorb water vapor more easily than MJ vapor.
 
flotntoke,
  • Like
Reactions: howie105

RwaNde

Member
I was solely after denser ballons, then found the surprising bits. I had a bottom shelf stash with very low potency. The big find is that it was producing more potent ballons on 84% RH then on 62%. I'm using only Boveda packs. Also, ABV appeared quiet a few shades darker on 84% which made me start thinking on how is this even possible. Not even mentioning the 8-10% weight increase from 62 to 84%, which means a little less plant material was being vaped in each sessions. In a nutshell.
 
Last edited:
RwaNde,

flotntoke

thoroughly vaped
Just to be clear..... I don't think this is increasing potency or see how it could. You seem to be increasing vapor production, but that vapor probably isn't isn't as high a percentage of actives as without the additional moisture. Same as my gin & tonic has more volume than just the gin in it, but no stronger with alcohol than just having a shot. Or, more closely my gimlet (2 shots gin, 1/2 shot lime juice).

What type of vape are you using? Do you find you get more bags/vapor per load? I would think the total vapor (MJ vapor + additional water vapor) will be denser in every bag also, correct? Or, the same vapor produced with a slightly smaller load.

Yeah.. you're always going to have weight increase with moisture increase. This is an old trick shady dealers have used for years. A couple of good mists of water can make as little as 12.5g of material register 14g on a scale.

This isn't to say you're not getting more potency per bag. Much depends on vaping style. I often see videos of people exhaling huge clouds from their vaping. IME (and a thread or two around here discussing the topic), doing this is at least somewhat wasting vapor. Your lungs can only absorb so much actives per hit (or breath would probably be more appropriate). If you add water vapor as filler and exhale huge clouds, part of what you are exhaling is going to be water vapor also. Less waste = more potency. I seldom go for the big clouds and try to get what I can from most hits, so not an issue here.

I also wonder what effect, if any, the additional water vapor has on absorption by the lungs.

However if you've truly found a way to increase potency or actives production with the simple addition of moisture, not only am I going to start doing this - I'm submitting you as a candidate for the Nobel Prize in Alchemy!
 
flotntoke,

TeeJay1952

Well-Known Member
Doesn't aging increase potency? (curing) Doesn't THC-A morph into THC under correct conditions?
Some users who are chasing dollars instead of clouds sell their stock as soon as possible. OP is storing under various humidity aging, then adding water. Cannot the increase in steam (potency) be aging and not water add? It would look like the water made bigger clouds but those are just (just?) the transport.
 
TeeJay1952,

RwaNde

Member
Just to be clear..... I don't think this is increasing potency or see how it could. You seem to be increasing vapor production, but that vapor probably isn't isn't as high a percentage of actives as without the additional moisture. Same as my gin & tonic has more volume than just the gin in it, but no stronger with alcohol than just having a shot. Or, more closely my gimlet (2 shots gin, 1/2 shot lime juice).

What type of vape are you using? Do you find you get more bags/vapor per load? I would think the total vapor (MJ vapor + additional water vapor) will be denser in every bag also, correct? Or, the same vapor produced with a slightly smaller load.

Yeah.. you're always going to have weight increase with moisture increase. This is an old trick shady dealers have used for years. A couple of good mists of water can make as little as 12.5g of material register 14g on a scale.

This isn't to say you're not getting more potency per bag. Much depends on vaping style. I often see videos of people exhaling huge clouds from their vaping. IME (and a thread or two around here discussing the topic), doing this is at least somewhat wasting vapor. Your lungs can only absorb so much actives per hit (or breath would probably be more appropriate). If you add water vapor as filler and exhale huge clouds, part of what you are exhaling is going to be water vapor also. Less waste = more potency. I seldom go for the big clouds and try to get what I can from most hits, so not an issue here.

I also wonder what effect, if any, the additional water vapor has on absorption by the lungs.

However if you've truly found a way to increase potency or actives production with the simple addition of moisture, not only am I going to start doing this - I'm submitting you as a candidate for the Nobel Prize in Alchemy!

It seems that water does more than just adding extra vapor - which in my opinion a rather useless feature apart from a general smoothing effect.

I'm using Extreme Q, loading 0.1 into the filter of the balloon whip for each session. Unit preheated at all times but I let the packed herb sit to warm up for 3 minutes before I start blowing the balloon. Let it be filled fully on fan 2 at a temp of 190 deg celsius. This is the same method I'm using on both 62% and 84% RH.

Again, in every case the ABV gets darker with denser vapor produced on 84% RH giving stronger high in every single case. On 62%, some plant material stay lighter brown around the edges of the filter which indicates less heat been redistributed to the effected areas - this is a normal phenomenon with cheaper units such as ExtremeQ though, just give it a stir when the ballon is half way vaped.

"I also wonder what effect, if any, the additional water vapor has on absorption by the lungs." A point here might well worth looking into.

Doesn't aging increase potency? (curing) Doesn't THC-A morph into THC under correct conditions?
Some users who are chasing dollars instead of clouds sell their stock as soon as possible. OP is storing under various humidity aging, then adding water. Cannot the increase in steam (potency) be aging and not water add? It would look like the water made bigger clouds but those are just (just?) the transport.

I'm letting my buds hydrate for a maximum of 8 hours before vape, therefore I think the aging process cannot be induced in such tight timeframe.

I do suspect that water does an extra job here somehow.
 
Last edited:
RwaNde,
Hi guys, I'm wondering... did anyone tried to add some kind of humidity to your weed before vaping it?

If we could add misture to our herb before vaping it, then our herb will have more vapor to give back...

:peace:

I had a really big tight dry herb and put it in a simple Tupperware 2sided container moist towel on small side and bud on other let sit in cupboard for a 5 days..bud was flavorful and slow burning. Just vaped it and was good too! Do not over humidify!!

Sure, but it won't get you any higher. At. All. :)

Tom
Yes but do not over humidify
 
Last edited by a moderator:
Medicalizemoegreen,

flotntoke

thoroughly vaped
I find using a humidity controlled container is the best bet. last longer than dried out crumbly stuff, and isnt 'wet' enough to cause mold, etc

this is what i use

That's what I'm talkin bout! As said above in this thread IIRC, a Boveda in a tightly sealed mason jar in a dark place is just as good. If you're set on a c-vault, they're cheaper at Amazon. Worth grabbing a couple IMO.
 
flotntoke,

smartbass

Active Member
Funny you ask this I just cleaned my grinder and it was stilll moist from the water. I ground up dry weed and left it in there for an hour, I wasn't at all planning this. I came back and its all moist and I couldnt even feel it when I vaped it. It was nice, weird this pops up right after I did it for the firs time
They say the dryer the herb the better the vape you would think it would be better if it was moist
 
smartbass,

flotntoke

thoroughly vaped
They say the dryer the herb the better the vape you would think it would be better if it was moist

Not really. Just think about it. More moisture = more water = more steam/less vaped goodies per hit.

But, your stash will store and age better with some moisture content. Optimally, I store at 62% humidity with Boveda pack and move a week's worth or so to another airtight container. Then, I lightly dry what I'll be using for a bit before grinding or breaking it up. My preferred method is to put it on top of the cable box (or receiver or whatever) for an hour or two in a folded piece of paper or open envelope. This dries it out just right for my liking. Only do this for a day or two worth. If you get in a routine, it's not hard to remember to do it. For me, I put it on to dry when I get home, put the nano on vape temp to warm up, and have dinner or do chores or whatever. When I sit down to vape about an hour - hour and half later everything is ready to go.

Sometimes I go straight from Boveda to grinding. It works, but the grinder gets messy and it takes a hit or two to preheat/dry the load to my liking on most vapes I use.

It can also get too dry if you leave it in envelope for too long (or don't store properly) which leads to less flavor and harsher hits.
 
flotntoke,

sokesleezy

Well-Known Member
I always wondered, if you jar some bud you got for 2-3 weeks will there be an improvement in flavor? I'm talking about weed that wasn't fully cured (optimal flavor and smell) in the first place .
 
sokesleezy,

Wizsteve

Well-Known Member
I always wondered, if you jar some bud you got for 2-3 weeks will there be an improvement in flavor? I'm talking about weed that wasn't fully cured (optimal flavor and smell) in the first place .

I would say yes however use caution any moisture could turn to mold .

Use a bigger jar than you need and add something that can absorb the moisture like dried mango ,pineapple, mixed with uncooked rice on top and bottom wrapped in a cheese cloth like little sachets bud in the middle.

You will find this to add a little extra the taste will come thru :leaf:
 

flotntoke

thoroughly vaped
I would say yes however use caution any moisture could turn to mold .

Use a bigger jar than you need and add something that can absorb the moisture like dried mango ,pineapple, mixed with uncooked rice on top and bottom wrapped in a cheese cloth like little sachets bud in the middle.

You will find this to add a little extra the taste will come thru :leaf:

Some people like a fruity taste in their vapor, but not me! Stay away from fruits, orange rinds, etc unless you want some of that flavor possibly imparted and you are relentless about mold - like checking with the scope daily. This part not as much of a problem if you are using truly dried fruit (buy it that way or know what you're doing with a dehydrator), but I still stay away from it. Get a couple tight sealing jars and some Boveda packs. They're about $2 apiece and each one lasts me 8 to 10 months - so less than a quarter a month.
 
flotntoke,
  • Like
Reactions: Vaponly

Wizsteve

Well-Known Member
Some people like a fruity taste in their vapor, but not me! Stay away from fruits, orange rinds, etc unless you want some of that flavor possibly imparted and you are relentless about mold - like checking with the scope daily. This part not as much of a problem if you are using truly dried fruit (buy it that way or know what you're doing with a dehydrator), but I still stay away from it. Get a couple tight sealing jars and some Boveda packs. They're about $2 apiece and each one lasts me 8 to 10 months - so less than a quarter a month.

That's what the rice is for ;). it absorbs moisture and yes the fruit will add to the smell and taste.
The nice thing is you can renew them just be placing the sachets in a food dehydrator for a few hours.
((now i am not saying not to burp the jar and just walk away from it of course you be checking it i just figured everyone knows that all ready ))

As far as i am concern if i am vaping something called pineapple whatever it better dam well taste like pineapples.:rofl: ((this just helps))

To add moisture wet clay (unfired) using cheese cloth again sealed in a jar will do wonders.to renew just soak in water.
 
Wizsteve,

FlyingLow

Team NO SLEEP!
I don't think people/general public really understands how bad adding moisture is and it usually results in mold... I have seen uneducated persons mistake this for "crystals" before - YUCK
 

flotntoke

thoroughly vaped
That's what the rice is for ;). it absorbs moisture and yes the fruit will add to the smell and taste.
The nice thing is you can renew them just be placing the sachets in a food dehydrator for a few hours.
((now i am not saying not to burp the jar and just walk away from it of course you be checking it i just figured everyone knows that all ready ))

As far as i am concern if i am vaping something called pineapple whatever it better dam well taste like pineapples.:rofl: ((this just helps))

To add moisture wet clay (unfired) using cheese cloth again sealed in a jar will do wonders.to renew just soak in water.

That's all fine, and to each his own and all, but I'd rather not add fruity flavors to my stash. I want my meds to taste like they are, not like anything else. I prefer vapes that bring flavors out and let them shine, and the last thing I want to do is change them. If I'm vaping something with pineapple in the name, I want to taste the hint of pineapple that may be there or not if it doesn't taste that way. If I want to taste pineapple, I'll eat a piece (usually fresh for me instead of dried) or have some pineapple juice.

Same with moisture to some extant. Boveda packs just increase/decrease humidity to the range they are made for. I think 62% works pretty well (tho if I could I would probably get some at around 55%). I definitely don't want more than that. It will add a little life and let flavors come through more than if drier. But, it won't refresh anything that gets to a certain level of dryness and has left me thinking that if you are taking very dry weed and adding much raw moisture (with cotton or clay) you're just begging for mold in your jar.
 
flotntoke,

Wizsteve

Well-Known Member
Clay has been used for this purpose for years long before Boveda packs was made last 3-5 years and in all a whole lot cheaper in the long run.
Forced humidification is bad and should be avoided. It can cause cigars to burst, wrappers to loosen, blister or mold. It takes ten days to two weeks to replace the moisture of dried out cigars. Restoration should be a slow, gradual process.

Color coded, dark purple when wet, light in color when dry.
When saturated, the Brick Plate does not drip water after the excess is drained off.

Why is The Brick Plate, The Wonder Moistener?

The original non-electric humidifier developed in 1925 by Mortimer “Doc”Stammelman PhD, Physical Chemistry, which has passed the test of time.

Developed specifically for tobacco products.

Automatically maintains a normal level of humidity according to requirements of tobacco.

Consists of both organic and inorganic compounds which are inert and cannot harm tobacco. It is odorless, dark when wet, light in color when dry.

bricks_small.jpg


http://www.humidorstore.com/brickhumidifier.html
 
Top Bottom