Discontinued Vapolution 3.0

ataxian

PALE BLUE DOT
It will pre-heat to the setpoint temperature. You can pre-heat to any temperature you choose.

The convection kicks in when you inhale. Fresh air is heated by the glass heater lining providing convective heat to the load. Convection is only present during inhalation. During preheat and in between hits, when there is no airflow, conduction is the primary method of heat transfer.

Below is new video showing the Infuser connected to a whip. Enjoy!
Nice Vaporizer however I'll skip the infuser.

CANNABIS is the GRAIL!
 

ataxian

PALE BLUE DOT
Why skip the Infuser? Don't you wanna be a Pioneer and take the GRAIL to another LEVEL???

It shouldn't be long now! This is the only vape I care about at the moment for VAS!
I bought into the infuser for my VAP2.

If your like me you most likely have no problem with cannabis inventory.

The Infuser I have from my VAP2 and I found it to be more of a gimmick?

I like COLAS the most!
Oil I like pure and clear.
HASH made well with Trichomes OK!

But Buds dried out and stale?

VAS I get and will get a VAP3 when available.

The INFUSER I'll pass!

CANNABIS is the GRAIL!
Not paraphilia!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Ah alright, been a while since I popped in here. Dig the progress, digital all glass direct draw and hydratubes, with whips as well. A very nice looking, simple and effective design. The infuser is a neat idea for sure. Looking forward to how the launch goes hopefully very soon!

Congratulations and good luck getting the VAP3 out there @Vapolution Vaporizers!
 

paytonpenn

Level 30 Nature/Healer
I'm checking the site daily, how am I going to get this for Christmas if it never gets released. :(

Anyone have an opinion on using this type of stuff for the tubing?
 
Last edited:

Vapolution Vaporizers

Vapolution Vaporizers
Manufacturer
I'm checking the site daily, how am I going to get this for Christmas if it never gets released. :(

I can assure you we want this released a soon as we can. One of our last 2 shipments is due to be delivered today. The last shipment will hopefully be here by the end of the week. I know we are cutting it very close to Christmas. We will post here and on social media as soon as it is available. Thank you all for your patience.
 

Rizzalso

Well-Known Member
Sorry if this has been asked before, but is the vapolution compatable with the 18mm VapeXhale hydratubes? I see the 14mm adapter on the website but don't see anything about 18mm. Thanks!
 
Rizzalso,
  • Like
Reactions: ataxian

Vapolution Vaporizers

Vapolution Vaporizers
Manufacturer
Sorry if this has been asked before, but is the vapolution compatable with the 18mm VapeXhale hydratubes? I see the 14mm adapter on the website but don't see anything about 18mm. Thanks!


Hi Rizzalso. The Vapolution 3 will be compatible with the VapeXhale hydratube with the use of our 14/18 adapter.
 
Last edited:

Harmoniousliving

Well-Known Member
I can assure you we want this released a soon as we can. One of our last 2 shipments is due to be delivered today. The last shipment will hopefully be here by the end of the week. I know we are cutting it very close to Christmas. We will post here and on social media as soon as it is available. Thank you all for your patience.
Crossing my fingers for a before Christmas release
 

paytonpenn

Level 30 Nature/Healer
I'm checking the site daily, how am I going to get this for Christmas if it never gets released. :(

Anyone have an opinion on using this type of stuff for the tubing?
Well my sleeving came and it's pretty nice. Can't wait to officially put it through the test, the material is very thin and loose, the whip does not lose its flexibility and it tightly wraps around the whip.

EDIT:
Like mentioned in the video you may want not want to cut the sleeving with scissors as it frays.
 
Last edited:

Harmoniousliving

Well-Known Member
Well my sleeving came and it's pretty nice. Can't wait to officially put it through the test, the material is very thin and loose, the whip does not lose its flexibility and it tightly wraps around the whip.
Sleeving ?is that a part of the unit or...
 
Harmoniousliving,

smutman

SmutmanMDCXX
Well, doesn't look like this will be under any christmas trees this year :(

When will this be coming out? I got $269.99 for a premium package just waiting to be transfer to Vaporlution :)
 
smutman,
  • Like
Reactions: RUDE BOY

Vapolution Vaporizers

Vapolution Vaporizers
Manufacturer
Would I still be able to hold the unit upside down as it runs through a bong?

Yes you can.

Well, doesn't look like this will be under any christmas trees this year :(

When will this be coming out? I got $269.99 for a premium package just waiting to be transfer to Vapolution :)

Our final shipment is supposed to be delivered today. Everything takes longer than I would like it too. We will start production as soon as we have all the parts. I apologize for missing Christmas. I am disappointed as well, but I cannot control the delivery schedule. I can assure you VAP3 will be available for purchase before Christmas, but it probably will not get delivered in time to open on Christmas morning.

Thank you for your patience. It will be worth the wait!
 

smutman

SmutmanMDCXX
Yes you can.



Our final shipment is supposed to be delivered today. Everything takes longer than I would like it too. We will start production as soon as we have all the parts. I apologize for missing Christmas. I am disappointed as well, but I cannot control the delivery schedule. I can assure you VAP3 will be available for purchase before Christmas, but it probably will not get delivered in time to open on Christmas morning.

Thank you for your patience. It will be worth the wait!

So when would they be delivered? Next week? January? Just curious because I'll buy when I know they ship then not later. I'm not a preorder person. Thanks for the quick response.
 
smutman,

Vapolution Vaporizers

Vapolution Vaporizers
Manufacturer
All this time I thought that you could only use the VAP3 with a whip or HT, but now I read that it's possible to use it inverted? Whaaat?! :rockon:

You can use it inverted with dry herb only. Gravity will not allow for concentrates.

So when would they be delivered? Next week? January? Just curious because I'll buy when I know they ship then not later. I'm not a preorder person. Thanks for the quick response.

This is exactly why we have not offered it for sale until we have all the parts to build VAP3. We do not believe in pre-orders and only sell what we have in stock.


We have already begun building VAP3 since the remaining parts arrived safely today, so......

VAP3 is available for purchase from our website! Yeah!!

All orders placed will be mailed out within 3-4 business days until we can build up a stock pile. Once we have a good stock, we will be shipping the same day your order is placed.

Thank you for all your patience. We look forward to hearing what y'all think of it.

P.S. - Could a mod please move this thread into the correct forum since VAP3 is no longer unreleased.

Thanks! :nod:
 
Top Bottom