• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Errlectric Concentration Station

DieHard

Accessory supplier
Accessory Maker
Saw this unit at the South Florida Glass and Vape Show. I spoke with Matt at their booth and really liked what I saw. It is Made in the USA which I like a lot. It also has a 2 year warranty. Here is their website. https://www.errlectric.com/
This unit has some features that I don't see on most E-nails. It has a shut-off timer that can be set from 3-420 minutes. It continues to display a caution message and Nail temperature until it cools upon power down.
I opted for all of the options with mine. They have a Ti "Vortex" cap/dabber in various colors. A Ti cleaning brush and a Travel case. I also purchased their quartz nail insert, this will allow dabbing from either quartz or Ti.
I mentioned FC said he said he had heard of us. I suggested an "FC Discount" and got one. I really like this thing so far. It came very fast upon ordering and was packaged well and very discreet. I am going to see if they are interested in joining FC.
sRdf9VU.jpg
 

blindowl

goin to some place where I've never been before
I am seriously considering one of those too. I like the extra functions such as the adjustable timer. Also it being made in the USA. The one thing which i dont like though is that the coil and nail are firmly attached and removing the coil voids the warranty on the coil. But still, its the most attractive enail on the market to me right now. Would be rad if they joined FC.
 

vjt324

Well-Known Member
dude im seriously considering grabbing one.. im sketched out about not being able to switch nails...any thoughts bro? @DieHard
 
vjt324,

DieHard

Accessory supplier
Accessory Maker
I find that when heating up from cold, it only takes about 2-3 minutes max to get to 700-800. Didn't really time it tho. It does not overshoot the preset temperature by more than a few degrees. Running at 600 now. It seems to hold within +/- 5 degrees at idle. Immediately after an average capped dab it drops a few degrees while hitting my WP, but back up to within +/-5 in seconds. It does not ever wildly overshoot the set temp. The Vortex cap is very low mass so there is not a lot of heat loss due to a cold cap. I have never seen the coil turn red hot. I'm going to bring my Fluke Meter with Thermocouple into the mix today to verify the accuracy. I'm sure this has to help the coil last longer.
 

DieHard

Accessory supplier
Accessory Maker
The nail is attached to the coil. They also have an option that has the dish part for a HE Infiniti nail. There is a quartz insert for their nail.
 

DieHard

Accessory supplier
Accessory Maker
So I have put enough shatter and crumble through this thing to need to do some minor maintenance. The nail has some build-up in the chimney. I found that the Vortex cap is a perfect fit to use to clean the chimney. The shape of the end is not the best for a dabber but it works great for cleaning. Push in and twist, and the wedge-shaped end augers out all of the crusty build- up. This is the best vapor-related purchase I have made. 4 months of hard daily use and no hiccups or regrets.
 

Silver420Surfer

Downward spiral
@mixchu69 -- Yo can use the Auber universal nail with the Errlectric vortex cap.
The universal nail has 2 pieces that you can use as the top "dish", one is smaller than the other and the vortex cap fits it perfectly. I have been a HUGE fan of the Errlectric vortex cap and am so happy I can use it with my Auber. My cap should be here next week. Just thought I'd mention it, not trying to derail this thread.
 

white russian

Well-Known Member
i find this an amazing product, had my @errlectric 6 months thing is an absolute beast, so much so i don't think i would bother with flowers again, definitely a dabbing convert here, heat up time of nail is lightening quick, lovely control over temp too makes things a breeze. I've got the quartz insert loved this little guy but unfortunately i broke the centre part last night when i was too aggressive cleaning out some grunge after i gave it a ultrasonic bath, so beware people the insert breaks easy if you don't handle it with kid gloves.

i like that these guys are not resting on there laurels i hear per instagram a FULL QUARTZ NAIL is on the way! these guys get my full backing as i have never received customer service like these fellas provide, quite astonishing the lengths they go to make sure you are happy. HIGHLY.. recommended.
 

white russian

Well-Known Member
Here's a little video that I made with the Kathy057 "toro Knock-off".

DieHard what is your fave temp using the quartz insert and capping? at the moment my sweet spot is 650 f i really enjoy the flavour and the high set here, but if i want to get more ripped i turn it up but sacrifice flavour somewhat doing this.
 
white russian,
  • Like
Reactions: DieHard

white russian

Well-Known Member
DieHard

i Tried using the nail without the quartz insert for the first time last night, i choose the 550f that you mentioned, i found this to be way hotter than i like but boy was i REKT, i now realise that using the
quartz insert is far superior in every way, you need to crank up the heat to compensate but the taste is
miles better imo. i'm definitely all over the full quartz nail when its released.
 
white russian,
  • Like
Reactions: DieHard

DieHard

Accessory supplier
Accessory Maker
DieHard

i Tried using the nail without the quartz insert for the first time last night, i choose the 550f that you mentioned, i found this to be way hotter than i like but boy was i REKT, i now realise that using the
quartz insert is far superior in every way, you need to crank up the heat to compensate but the taste is
miles better imo. i'm definitely all over the full quartz nail when its released.
The instructions that
Came with the quartz insert say that you may need to run 100F hotter than your normal temp on the Ti.
 
Top Bottom