• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

BHO Thermos tek

Status
Not open for further replies.

Shiggity

Well-Known Member
I posted this in dewaxed ntane but feel I am dreailing that thread so wanted to create a thermos tek thread. Credit to Jump and others for creating and refining this technique.

1.Take metal thermos that holds 16oz liquid and drill 3 1/8" holes in the top.http://www.amazon.com/gp/product/B004MH3NGU/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
2. Put tape over holes. Pack thermos to about 2/3 full of material and put on lid.
3. Put thermos in freezer overnight. The tape prevents entry of water which can ice over your trichomes and prevent good extraction
4. Put can of Vector butane in freezer overnight or at least a few hours. This cools the 'tane and lowers the pressure.
5. Take butane and thermos outside. Remove tape from thermos. Inject butane into thermos in one of the lid holes and let sit for 2 hours. The other two holes are for venting. If it is warm outside an ice bath can help keep the thermos cold. One can of Vector will fill the thermos about 3/4 full with the herb inside.
6. After 2hours put unbleached coffee filter over the end of thermos and insert into regular mouth ball jar with metal rim but no lid on. (the metal rim is the perfect size to go around the filter and keep it tight). The jar would be upside down over the thermos.
7. While holding everything tight together invert the thermos and jar assembly and the butane filters nicely into the ball jar. keep inverted for the 10 or so minutes it takes to get all the butane out.
8. you can let the butane offgas from the thermos after removing the thermos and filter from the ball jar. Then use Iso to get the rest of the goodness from the material. I dont do a second butane run.
9. Sit the ball jar in a warm water bath until most of the butane is gone.
10. Add 5ml everclear to the remining butane and keep in water bath ntil no bubbles are formed. You should already see some wax precipitating.
11. When no butane smell is left cap the ball jar and put it in the freezer overnight. It should go to a cloudy yellow color.
12. remove the liquid with 10ml syringe and put 0.22um syringe filter on.
13. Push the BHO/everclear mixture through the filter onto silicone sheets. Make sure not to let the everclear warm up too much when using the syringe filter or your precipitated waxes may reenter solution. let dry to a dull clear yellow. If it looks glossy water is still present. (stop here if not making eliquid and enjoy)
14 Remove the absolute from the silicone sheets. I usually warm the sheets with my hand until the absolute gets a little sticky than roll it up into a ball using the sheets.
15.Put a few drops of ejmix in a shot glass (about 10) shot glass and warm up in a water bath (100 degrees F-120F).
16. Add absolute and stir with metal dab tool until dissolved to right consistency (add more drops if needed. I like to make it viscous like honey.
17. Pick up the liquid with a syringe and use syringe to dispense onto coils of RBA. I like the syringe because it lets me add just the right amount onto the top of the coil.
18. Enjoy! (ejmix step not necessary but I like to keep my concentrates in a sryinge for easy application. Using the minimal amount of ejmix keeps the taste of the PG away and keeps the strength high.


Advantages to the thermos method
1. Increasing yield by increasing soak time.
2. There is no blasting event. You just empty the frozen can into the frozen thermos. Very low pressure so little butane if any is released from the thermos until you want to. I feel this is much safer because I am not around the thermos during the extraction. None of the butane off gasses during this soak time so that increases safety as well. I will probably switch to a steel mesh filter to reduce filtration time and waste.
3. Chorophyll is pretty much insouble at this temperature and time period. Other undesirables are also less soluble. (I still winterize to get rid of waxes)
4. No danger of butane making a tunnel and missing some of the goodies, all the nuggets are submerged in liquid butane.
5. If desired two runs can be done, the first for 30 min and the second for 2 hours. Uses more butane but you end up getting more yield.

Edits to original method:
I found a mesh tea ball that fits right into the end of my thermos and locks in. I ripped the other half off and now I just use that as my filter. Since I do the winterization and ethanol evap to clear my butane I dont have to worry about a little bit of fine particles coming through in the first dump.

Also, I turn the thermos cap upside down when filling now (open end up) so that it lies flat against the thermos opening. This loses less butane out the sides of the cap. I have heard of others using a jar lid to achieve the same effect. Then I turn the cap right side up again during the soak.

Please post your thoughts and results. I will get pics up when I can find a camera that wont embed data lol.
 
Last edited:

kingtut106

Well-Known Member
Just wondering why you would winterize with ethanol if you are keeping your butane in liquid form. You could just wait 90-120 minutes and let you unwanted materials drop out and not even need to use ethanol.
 

Shiggity

Well-Known Member
@kingtut106 I will try this next batch. Do you lower the temp even further by using a dry ice bath? I work in a science lab so I can get dry ice for free. Haven't tried vac purge yet so I use ethanol as a convenient way to get rid of residual butane. But I am going to get a nice vac soon ;)
 
Shiggity,
  • Like
Reactions: xRUFUSx

kingtut106

Well-Known Member
I pick my dry ice up from ACME ice, there is a shop a few miles from my house. I walk down with my styrofoam container and they will it up costs me $11.

From someone else who might work in a lab (hahah) I find picking up from a store even easier. They have nice pellets of dry ice, which I found is better then just one block of dry ice. I've been thinking of posting a thread with detailed pictures as a guide...?
 
kingtut106,
  • Like
Reactions: xRUFUSx

xRUFUSx

special like everyone else
For safety and discretion, I decided to move from blasting to qwiso/jar methods. I miss how selective butane is, but I'd prefer not to regularly have to manage the inherent risks... The pros you mention for the thermos method make sense though; I'll be trying that in one of my next few batches. I think.

Though relatively safe when handled with common sense (common to at least the thc extraction community), it seems the most relative risk for disaster is in emptying the can of tane. Once I'm sure I'm taking every reasonable measure to minimize that risk, I'll dive in (carefully).
Also, I turn the thermos cap upside down when filling now (open end up) so that it lies flat against the thermos opening. This loses less butane out the sides of the cap. I have heard of others using a jar lid to achieve the same effect. Then I turn the cap right side up again during the soak.
I think I get it but I imagine it'll make more sense once I have that piece in my hands :p

I've blasted a 1oz glass tube before a dozen times or so using the standard prescribed safety precautions, but didn't enjoy having to watch (face exposed) pressurized explosives spraying at arm's reach... feels sketchy.
:uhoh:
@Shiggity BTW your how-to is very thorough and a good resource for this topic imo, thanks
 
Last edited:
xRUFUSx,
  • Like
Reactions: Shiggity

farscaper

Well-Known Member
For safety and discretion, I decided to move from blasting to qwiso/jar methods. I miss how selective butane is, but I'd prefer not to regularly have to manage the inherent risks... The pros you mention for the thermos method make sense though; I'll be trying that in one of my next few batches. I think.

Though relatively safe when handled with common sense (common to at least the thc extraction community), it seems the most relative risk for disaster is in emptying the can of tane. Once I'm sure I'm taking every reasonable measure to minimize that risk, I'll dive in (carefully).
I think I get it but I imagine it'll make more sense once I have that piece in my hands :p

I've blasted a 1oz glass tube before a dozen times or so using the standard prescribed safety precautions, but didn't enjoy having to watch (face exposed) pressurized explosives spraying at arm's reach... feels sketchy.
:uhoh:
@Shiggity BTW your how-to is very thorough and a good resource for this topic imo, thanks
how is a jar any safer than a tube?

I personally just find it more wasteful on butane... and more tasking to recover all the solvent from the plant material.

with a tube you only use as much solvent as needed and you can pump air through the tube to clear the remaining solvent... without a buchner filter or a press of some kind you will still see loss and I find that jar methods are also a heck of a lot messier...

to each their own. but using a tube is more efficent. ime
 
farscaper,
  • Like
Reactions: xRUFUSx

xRUFUSx

special like everyone else
how is a jar any safer than a tube?

I personally just find it more wasteful on butane... and more tasking to recover all the solvent from the plant material.

with a tube you only use as much solvent as needed and you can pump air through the tube to clear the remaining solvent... without a buchner filter or a press of some kind you will still see loss and I find that jar methods are also a heck of a lot messier...

to each their own. but using a tube is more efficent. ime
I should clarify: I only use 91% iso in jars atm because of reasons mentioned and $$

As for the thermos... I can't say it's safer than tubes. I only meant to say (wasn't specific) qwiso/jar method is safer than bho-tube-blasting because of the difference in fire hazard from the solvents. Dealing with pouring containers full of butane while straining sounds like a point of care and precaution not present in blasting too.

I'm curious about the thermos method because of the control over exposure time. My understanding is at temps below water solubility, exposure times of 1hr+ are ok. And all I need is a $9 thermos :p
 

farscaper

Well-Known Member
I should clarify: I only use 91% iso in jars atm because of reasons mentioned and $$

As for the thermos... I can't say it's safer than tubes. I only meant to say (wasn't specific) qwiso/jar method is safer than bho-tube blasting because of the difference in fire hazard from the solvents. Dealing with pouring containers full of and butane while straining sounds like a point of care and precaution not present in blasting too.

I'm curious about the thermos method because of the control over exposure time. My understanding is at temps below water solubility, exposure times of 1hr+ are ok. And all I need is a $9 thermos :p
ahhhh qwiso. ive been concidering a pass through (blast) tenique for alcohols for a min.
but... pertaining to butane why soak for an hour when you dont need to? butane is rather aggressive... probably more so than even 99%iso but with difftent polarity properties.
most of the chilling is not so you can soak longer... but rather to keep butane in liquid form...in an unpressurized container. at room temp it would all evaporate while soaking.

as far as cost thats how much a stainless steel turkey baster costs so thats not really an issue.

no knocking anything... ive used both... I just do not favor the thermos tech due to the solvent retrieval difficulty. I have much better quality and quantity with my passthrough techniques.
 

kazz

Little Lebowski Urban Achiever
12. remove the liquid with 10ml syringe and put 0.22um syringe filter on.


What media filter do you use? Nylon, glass fiber, PTFE, Cellulose? I like the idea of straining through the syringe. Is the 0.22um required or will a 0.45um suffice?

Thanks for posting these directions!
 
kazz,
Status
Not open for further replies.
Top Bottom