Cheap High Quality Bubbler

budha707

budha707

Well-Known Member
BoogerMan said:
Found this new one. The art is pretty cool. Male joint though which doesn't seem to be ideal for most. But hey there are always adapters :)

$43.15 shipped to US

http://www.dhgate.com/product/oil-g...ss-bongs-mini/193726279.html#s1-2-1|677405247

image_zpsbe1bfe54.jpg
Click to expand...
that looks dope!! i wanna get it but i dont know what size it is.
 
ataxian

ataxian

PALE BLUE DOT
Shit Snacks said:
Ataxian do you know how tall it is top to bottom?
Click to expand...

I need to measure it.
I have so much stuff I haven't even tried yet?

There is more stuff I want to buy!

Self Control?
N93lzxF.jpg

The D022 works amazing and I only used it 3 times?
MUQ2oNq.jpg


The D020-T works amazing and I only used it 2 times?

Then I have all these Dabbing rig's I haven't tried.
4ODueEo.jpg

I will dab with the D020-T and try it.
OWJXrFR.jpg


Control, Control?

My medical room is starting to look like a SMOKE SHOP?
 
Last edited:
cybrguy

cybrguy

Putin is a War Criminal
Shit Snacks said:
Anyhow, after searchig through some old posts thanks to you, I ended up settling on the D020-T (shout out to @ataxian for testing the waters with it and posting those pics, thanks dude!). It seems like exactly what I was looking for, a decent balance of diffusion for a vapor-bubbler beginner and size versatile enough for group or solo (or Solo, badumdum...) use. I also think the form factor will suit the lengthy LSV better than the D020's and i like the taller mouthpiece as well. I see the can height listed, but Ataxian do you know how tall it is top to bottom?
Click to expand...

This was the second piece I bought, after the D020. The can is nearly identical in size, though the piece is about an inch taller due to the different MP tube style. Roughly 9" tip to table. To be honest, I don't think there is a lot of consistency in these pieces and they are all slightly different from each other, so precise descriptions may not be useful. My 20-T, for example, is not perfect with the Lotus because after adding a reducer to get to 14mm, the head of the Lotus doesn't quite make it over the lip on the can and rests on it (it does seal). As it happens I have a slightly misshapen reducer that raises what it holds about 1/4" above normal height which is perfect for the Lotus head. There are likely other ways to raise the Lotus head slightly so this doesn't have to be a problem.

The 20-T is better with the Lotus because the head remains a little farther away and is easier to see for holding a flame on it, but the more I think about having these lighters so close to my face the more I think a bigger piece is a better idea for the Lotus. I find I often still use my old bigger bong for this reason. A decent claisen, however, or other accessories in various collections we see can easily resolve any of these issues, with the Lotus or other vaping tools.
 
Last edited:
Meghan

Meghan

Well-Known Member
Sinclue said:
One night in the throes of GAS I needed a fix so I pulled this item off my wish list (this was on DHGate at the time from Kathy) and bought it. Long story short: never received it. She jerked me around for about a month with promises and then the same day as her last excuse she abruptly returned my money.

Wonder if anybody actually has gotten one of these and what it's like.

~
Click to expand...

I bought three of them (and resold two on the Classifieds here). For the price, a very nice little hammer bubbler! I purchased mine around Xmas, though (as gifts), so I'm not sure if she really still has them in stock or not.
 
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
oli

oli

Well-Known Member
Lezi said:
Thanks !!! .....GAS is already affecting Spain :lol:....i will go to this thread to give them this info.
Click to expand...
¡Bienvenido tío!

I have been holding on for some kind of surprise but it looks like I might just be too late...

I'll explain myself, since trying to organise a group buying for the tornado bubbler that did not go to plan, sorry again about that :bowdown:

http://fuckcombustion.com/threads/tornado-cyclone-europe-order.13833/

I have been researching and managed not too long ago to find another Indian supplier. He has it in 3mm and 5mm, so I have purchased the 5mm one to try and test it first before opening my big gob like last time and try to surprise you all with another (great...) fun piece.

But it looks like you have found a better deal and beat me to it as mine cost me $52 shipped to Spain :cry:

Anyway I'll be back as soon as I receive it...if ever...or I hope it won't be another :worms: or :shit:
 
jambandphan03

jambandphan03

in flavor country
It's here! and it's green... really well made, so far I haven't spotted any cracks or bad spots. Paired with a 18mm J hook from TQG aka thickassglass it sits up nicely and is at a great vantage point for using the Lotus. Very happy so far. I like the amount of diffusion it has, and there is a lot of water play/movement going on with the added D'oh nut. :p Quick dab vid to get things started...


C7VbrTX.jpg

9vuWM8c.jpg

KCahhP5.jpg

aY08cPS.jpg
 
pigfoot

pigfoot

Dabs are vapor too!
jambandphan03 said:
It's here! and it's green... really well made, so far I haven't spotted any cracks or bad spots. Paired with a 18mm J hook from TQG aka thickassglass it sits up nicely and is at a great vantage point for using the Lotus. Very happy so far. I like the amount of diffusion it has, and there is a lot of water play/movement going on with the added D'oh nut. :p Quick dab vid to get things started...


C7VbrTX.jpg

9vuWM8c.jpg

KCahhP5.jpg

aY08cPS.jpg
Click to expand...

Nothing like a quick dab to get started! :) I like how it sits, and the angle for everything looks really good.
How about the diffusion, it is less than the frit can? I am getting ready to order some type of AC, do you like this one better than the frit? I noticed that one is kind of "left handed".
 
Mister G

Mister G

Deceptively Old Fart
oli said:
¡Bienvenido tío!

I have been holding on for some kind of surprise but it looks like I might just be too late...

I'll explain myself, since trying to organise a group buying for the tornado bubbler that did not go to plan, sorry again about that :bowdown:

http://fuckcombustion.com/threads/tornado-cyclone-europe-order.13833/

I have been researching and managed not too long ago to find another Indian supplier. He has it in 3mm and 5mm, so I have purchased the 5mm one to try and test it first before opening my big gob like last time and try to surprise you all with another (great...) fun piece.

But it looks like you have found a better deal and beat me to it as mine cost me $52 shipped to Spain :cry:

Anyway I'll be back as soon as I receive it...if ever...or I hope it won't be another :worms: or :shit:
Click to expand...

I'm real interested to find out if the Tornado model from DHgate is 3mm or 5mm.

Also, I still haven't gotten any response from B'Toc on the size of the knockoff Hitman Funnel Recycler. Plus, I'm not sure but it looks like the price went up on it too, I recall it being 60-something shipped and it's now $76.63 shipped, maybe the shipping went up?
 
snackmaster

snackmaster

Well-Known Member
D020-T arrived today!

Aside from a rough spot and a couple tooling marks on the top of the can it appears to be the cleanest China piece I've received. I bought it mainly because I was looking for something with this form factor, a female joint, and no colored glass (just not my thing). Reiterating what @cybrguy said, volume-wise it's nearly identical to the D020. However, it's doesn't have the heft of the D020 (edit - after picking them both up again there isn't really a weight diff, but the D020 still feels more solid), the joint isn't particularly thick, and it hits much "chuggier." Overall not a bad pick-up, but I see the D020 and 187 getting more action in the future.

D020 & D020-T:


Slo mo water test w/ empty nano:
 
Last edited:
ataxian

ataxian

PALE BLUE DOT
jambandphan03 said:
It's here! and it's green... really well made, so far I haven't spotted any cracks or bad spots. Paired with a 18mm J hook from TQG aka thickassglass it sits up nicely and is at a great vantage point for using the Lotus. Very happy so far. I like the amount of diffusion it has, and there is a lot of water play/movement going on with the added D'oh nut. :p Quick dab vid to get things started...


C7VbrTX.jpg

9vuWM8c.jpg

KCahhP5.jpg

aY08cPS.jpg
Click to expand...
I keep buying stuff I don't even need!
Your fault!
I have 5 SHERLOCKS coming like yours. For the LOTUS. Now I need the ASH COLLECTOR like yours.
You keep teasing me to buy more stuff!

Your setup looks so nice!
 
Dangus

Dangus

Yeah, well, that's just, like, your opinion, man.
I liked the first mini rig so much I just pulled the trigger on this one:

xxiBDuK.jpg

http://www.dhgate.com/product/mini-glass-bong-10mm/191264528.html

the wait...it begins...


I'll also see if I can get a water/dab test video done with the other rig this evening...I also picked up a Grav Labs 10mm honeycomb nano rig recently...guess I should make a video of that as well...
 
You must log in or register to reply here.
Top Bottom