• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

axakal

Well-Known Member
i completely agree with you on being able to have all stuff in one case but it seems impossible to me with these, at least with out a drop in fit. judging from the pictures it hast at least the size of two mflb tins and you can put a lot more in two mflb tins. :) i use an empty cigar box for the stuff that doesn't fit in the tin. ironically it has the obligate "smoking kills" warning on it. :)

Even if it is overkill, I appreciate being able to have all my stuff in a case. Living in a small apartment with my girlfriend, cases make organization and packing things out of the way far easier.
 

GenYHippie

Well-Known Member
Why not just save yourself the effort of making one, and get one of these:
http://www.sears.com/shc/s/p_10153_..._sku=SPM8191542017&sid=IDx20131030xMPHWxCPA15

I have to admit i really like mine (got it as part of my 420 puff it up pack with my box) other than that it is hard to open. It really is well protected and stink proof.

If you want to buy a case fitting most of the accessories while not taking too much place, standard e-cig cases like this one might be worth it (I bought mine for less than $10) :

The FG fits well where the grinder is on that picture.
More details in an old post.

Thanks so much for posting this! I love my vape case but it isnt discrete for when im out and about. No one would think twice about an e-cig case unless they knew me (ive never smoked)
 

OF

Well-Known Member
Thanks so much for posting this! I love my vape case but it isnt discrete for when im out and about. No one would think twice about an e-cig case unless they knew me (ive never smoked)

This is my favorite field case for the LB:
http://www.amazon.com/Case-Logic-Po...066103&sr=8-6&keywords=case+logic+camera+case

It's big enough to hold the box and stem (box loaded of course) and a four AA battery holder with two charged batteries and two one dram vials (same size as an AA battery) with premeasured loads. 3 guaranteed trenches in your pocket. If I expect more need than that I can double that by abandoning the convenience of premeasured loads (each vial will hold more) and can squeeze another battery in next to the LB.

OF
 

GenYHippie

Well-Known Member
This is my favorite field case for the LB:
http://www.amazon.com/Case-Logic-Point-Camera-TBC-402/dp/B007Y4NWI2/ref=sr_1_6?ie=UTF8&qid=1399066103&sr=8-6&keywords=case logic camera case

It's big enough to hold the box and stem (box loaded of course) and a four AA battery holder with two charged batteries and two one dram vials (same size as an AA battery) with premeasured loads. 3 guaranteed trenches in your pocket. If I expect more need than that I can double that by abandoning the convenience of premeasured loads (each vial will hold more) and can squeeze another battery in next to the LB.

OF

Thank you! Funny enough i had that one in my cart but i was still debating since it doesnt have a pic of the inside. Would you mind sharing a pic of it?
 
GenYHippie,

OF

Well-Known Member
A quick update for the 'free 4/20 stem' faithful.
If you don't have yours by now, don't blame me, it's the Post Office.......

Thanks for the patients, guys, regards to all.

I just realized, I forgot to remind folks to clean the stem before use. Sorry for the obvious, but these days it never hurts to remind each other.

Thank you! Funny enough i had that one in my cart but i was still debating since it doesnt have a pic of the inside. Would you mind sharing a pic of it?

Nothing really to show, nothing going on inside. It's a simple, padded case. Nothing fancy, even has exposed seams. It protects stuff and keeps it together.

OF
 

GenYHippie

Well-Known Member
I just realized, I forgot to remind folks to clean the stem before use. Sorry for the obvious, but these days it never hurts to remind each other.



Nothing really to show, nothing going on inside. It's a simple, padded case. Nothing fancy, even has exposed seams. It protects stuff and keeps it together.

OF

Ahh ok thank you. I wasnt sure if it had pockets or bands to hold stuff
 
GenYHippie,

Vitolo

Vaporist
Has anybody created a nifty looking travel case for their box? I would love to get some ideas :)
Over time I have used a few cases...
Photoon2011-08-04at19232.jpg

Photoon2011-08-04at1922.jpg


Then I used:
Photoon2012-02-05at09465.jpg

Photoon2012-02-05at0946.jpg


Then there was:
DSC00188.jpg



I use this one to this day... it is my favorite!
Photoon2011-10-01at0931.jpg

DSC00292.jpg



My sucrets era
DSC00977.jpg

DSC00974.jpg

DSC00972.jpg

Photoon2011-12-30at1324.jpg

with fake sucret insert
Photoon2011-12-30at1316.jpg

The cutting out of the fake sucrets insert!
 

axakal

Well-Known Member

horst

horsed
I carry my MFLB in this case on the go. http://www.vatra.com/product/dragon/#.U2Sr_8fHcl4

Nothing special anyway, but I like the size. Fits a little more bulky than a pack of cigarettes in my pocket and holds the MFLB, 2 Batteries, 2 Stems, Brush, QTip, Toothpick, Elastic, ABV-Grip and the finishing grinder (or 4 pre-grounded herb-pills).

But can't really recommend it. It was advertised as smell proof but after a few days this thing is the same smell bomb as any photo-case would be. So instead of spending extra bucks for headshop products next time I will also look at cheaper cases designed for other things.

Pack of Cigarettes: Also a stealth way to carry I prefer at concerts, an empty cigarette pack. Fits the MFLB, Stem and Battery tied up with an elastic nicely and gets you through every body inspection. No one ever tended to look in it.
 

420democrat

Well-Known Member
How is the mflb with pa for concentrates . I recently got a connect for waxes and have no way of using them currently
 
420democrat,

Vitolo

Vaporist
works good with the concentrate tray.
I have used it pressed flat within cotton... directly in box.
tin foil works if you shape it right and keep the size down.
 

kente777

Well-Known Member
image-5.jpg
image-6.jpg


For those of you tired of a little herb always slipping out when transporting, here's my solution. I cut out a hole from a cardboard coaster, ran a piece of string in the center, and voila, a little hole cover easily removed.
 

axakal

Well-Known Member
the creativity of the members around here doesn't seize to amaze me. first horst with his graphic adventure and now this nifty idea. gotta love fc! :)

image-6.jpg


For those of you tired of a little herb always slipping out when transporting, here's my solution. I cut out a hole from a cardboard coaster, ran a piece of string in the center, and voila, a little hole cover easily removed.
 
Top Bottom