Arizer Solo

ataxian

PALE BLUE DOT
Hey guys got my Solo a couple days ago and used it Friday night at a party for the first time and it was awesome! I also wanted to chime in on the model number issue (sorry). I have a m1a4 and I have confirmed with Arizer support that this is a latest model. I've tested it and it can be used while charging. Arizer also stated that they reuse model numbers, so it is not a good indicator of the "latest" model.

Anyway I wanted to ask how much should the vapor "taste"? I'm vaping some juicyfruit and there's a really distinct taste afterwards, which just continues to get unpleasant as the bowl is vaped. I'm assuming this is normal but I really don't enjoy that taste. Also will rubber o-rings work to secure the stock straight stem? I heard to get silicone, but the home depot here doesn't stock silicone so i have the rubber ones right now. Should i bother ordering some silicone ones online or nah?
Qb2Pu2d.jpg

All 3 of my SOLO's have a 113 seal from CARR McMASTERS!
planet vapes includes one with a PHVES STEM as well!
There is a thinner seal for the new version of the SOLO.

Some of the more qualified member's know better than I.
I'm just a medical patient that loves the SOLO!
 

Caligula

Maximus
I didn't have them in at the time. Wanted to ask around before using them. I guess I'll find some silicone ones somewhere!

I think Mcmasters has them but you need to buy a larger quantity.

As for the taste, what temp setting are you using? Some strains will still give off vapor well after the flavor is gone. Is this taste youre talking about similar to burnt popcorn?
 
Caligula,
  • Like
Reactions: ataxian

Nu11ington

Well-Known Member
I think Mcmasters has them but you need to buy a larger quantity.

As for the taste, what temp setting are you using? Some strains will still give off vapor well after the flavor is gone. Is this taste youre talking about similar to burnt popcorn?

I use temps 3/4. The taste is basically how the herb smells- very woody and "grassy". It's just not very enjoyable and I have to take a sip of soda after each hit to mask the taste.
 

ataxian

PALE BLUE DOT
I think Mcmasters has them but you need to buy a larger quantity.

As for the taste, what temp setting are you using? Some strains will still give off vapor well after the flavor is gone. Is this taste youre talking about similar to burnt popcorn?
http://www.planetvape.ca/pvhes-high-efficiency-stems.html
Ask for a seal for the new model.
Mid April they will be in stock!
I use temps 3/4. The taste is basically how the herb smells- very woody and "grassy". It's just not very enjoyable and I have to take a sip of soda after each hit to mask the taste.
WOW!
Brick Weed?
FLAVOR is obtain from properly cured strains with good genetics!
The "HOLY GRAIL is CANNABIS"!
Change your flowers!
 

Caligula

Maximus
I use temps 3/4. The taste is basically how the herb smells- very woody and "grassy". It's just not very enjoyable and I have to take a sip of soda after each hit to mask the taste.

Sounds like your bud wasnt cured properly. Thats how you get that wet/cut grass smell/taste with herb. Where did you get it from? If it was from an MMJ or legal shop, id complain. If its from a dealer... id still complain if youre cool with him.

@ataxian im sure the other dude will appreciate that link, Thank you! Im all set with o rings myself.
 
Caligula,
  • Like
Reactions: ataxian

Nu11ington

Well-Known Member
Sounds like your bud wasnt cured properly. Thats how you get that wet/cut grass smell/taste with herb. Where did you get it from? If it was from an MMJ or legal shop, id complain. If its from a dealer... id still complain if youre cool with him.

@ataxian im sure the other dude will appreciate that link, Thank you! Im all set with o rings myself.

My dealer and good friend told me it's medical grade and I've received medical stuff from him before. Here is a picture, I'm not sure how much it will help. Got me pretty high nevertheless

AgdphpK.jpg
 

ataxian

PALE BLUE DOT
@ataxian im sure the other dude will appreciate that link, Thank you! Im all set with o rings myself.

Sorry I meant to reply to another post!

Please forgive me!

I have 113 seals I got from members and also from PLANET VAPES when I bought PHVES stems!

My 3 SOLO's are the OLD Model.
The new model I'll get later! I can kill the ones I have to justify updating them?
My dealer and good friend told me it's medical grade and I've received medical stuff from him before. Here is a picture, I'm not sure how much it will help. Got me pretty high nevertheless

AgdphpK.jpg

Where is the frost?
My MEDICAL strains taste amazing.
EFFECT and FLAVOR are both important!
 
Last edited by a moderator:

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
My dealer and good friend told me it's medical grade and I've received medical stuff from him before. Here is a picture, I'm not sure how much it will help. Got me pretty high nevertheless

AgdphpK.jpg
I think that no matter what high grade herb you use, once the majority of resin and terps approach becoming spent, your fresh flavors will greatly degrade to just heated plant cellulose flavors - some describe it as burnt popcorn, some woody/grassy, etc... I just accept it all as part of the process and use it as a gauge for how much heady stuff is left in the load. Granted the flavor you get from a diminishing load isn't luscious, it isn't putrid either ...it just is;-)
 
Last edited:

Nu11ington

Well-Known Member
Where is the frost?
My MEDICAL strains taste amazing.
EFFECT and FLAVOR are both important!
No frost/crystals visible ):

Just to clarify is this bad taste there the whole time or only towards the end after a few minutes of puffing?
In the beginning there's only a touch of the taste and after exhaling it feels as if I chewed a mint leaf (different flavored but same type of feeling if you get me). then the flavor intensifies and tastes too grassy for me.
 
Nu11ington,
  • Like
Reactions: Caligula

poonman

Well-Known Member
No frost/crystals visible ):


In the beginning there's only a touch of the taste and after exhaling it feels as if I chewed a mint leaf (different flavored but same type of feeling if you get me). then the flavor intensifies and tastes too grassy for me.

I find the 1st hit is the sweetest tasting , then the 2nd and 3rd to be the cloudier hits . Ya by the 7th hit , it can get popcorn tasty .

If you have the option to try another strain , that would help indicate if it's the current strain that is bad tasting or not . It could be that particular batch .

You stated it's new , did you do a few burn offs at the beginning?
 

Nu11ington

Well-Known Member
I find the 1st hit is the sweetest tasting , then the 2nd and 3rd to be the cloudier hits . Ya by the 7th hit , it can get popcorn tasty .

If you have the option to try another strain , that would help indicate if it's the current strain that is bad tasting or not . It could be that particular batch .

You stated it's new , did you do a few burn offs at the beginning?

I let the solo run for a full 12 minutes at level 7 when I first got it. I've probably done 5 bowls since then at 3-5
 
Nu11ington,
  • Like
Reactions: ataxian

ataxian

PALE BLUE DOT
No frost/crystals visible ):


In the beginning there's only a touch of the taste and after exhaling it feels as if I chewed a mint leaf (different flavored but same type of feeling if you get me). then the flavor intensifies and tastes too grassy for me.
Sounds to be harvested before it was fully mature?
Maybe it was a medical strain of top quality?
Typical issue these days were the grower needs to pay his bills and jumps the gun by harvesting early!
I want to see some frost!
The flower needs to be fully ripe.
Pick a bit early the taste suffers.
My loaded stems are good for 7 - 8 hits super sweet. The last 2 rips are just greed. If you can handle pass this point your taste buds are maybe not as sensitive as mine? Then again I tried the lower shelf strains once and had to give them away.

I guess it depends what is important to you?

I like both FLAVOR & EFFECT.

Seems like the 2 go together!

1/8th per month?
That's all?
 

Nu11ington

Well-Known Member
Yea anything in the solo should have vaped off already. Besides if it was the Solo the taste would always be there. This is 99.999% the herb. The question is if its normal for that strain or if its due to another factor like curing.

Dealer told me the strain was juicyfruit. It doesn't smell like skunk indica that I've smoked before. More of a natural pine-y smell. I'm not sure it fits the description of fruity or sweet smell but it definitely smells "fresher" and lighter than what I've had before. The vape tastes exactly like how it smells.
 
Nu11ington,
  • Like
Reactions: ataxian

Caligula

Maximus
I've had juicy fruit from DNA Genetics (they provide top quality seeds to growers). Not that its better than JF from any other seed bank, but im saying this to emphasize that its legit...

Anyway, it quite literally smelled like the bubble gum its named after.
 

Nu11ington

Well-Known Member
I've had juicy fruit from DNA Genetics (they provide top quality seeds to growers). Not that its better than JF from any other seed bank, but im saying this to emphasize that its legit...

Anyway, it quite literally smelled like the bubble gum its named after.


Hmm alright I think I must've picked up a different strain then. I'll verify with my dealer next time. Quality of this stuff isn't bad tho seems like a sativa strong hybrid. Bagged it for $45/eighth here in SE mich
 
Nu11ington,
  • Like
Reactions: ataxian

Threefingerlid

Well-Known Member
I do like the look of that bud except for the real lack of trichomes showing. Reminds me of long ago sativas we used to get that were often handled roughly. As has been said, finishing and curing is often overlooked in the push to market. A long cure can really improve most strains but sometimes you just encounter bud that may look great but you really don't care for the taste, high,whatever. When run through the Solo the taste is even cleaner with no where to hide..hell Id just burn through that eighth and try something new!
 
I recently purchased an Arizer Solo newer model. I'm having trouble due to material going through the holes in the glass screen. I tried cutting an installing a metallic screen but no matter what I do I can't get the metallic screen to stay inside the stem. Anyone has tips or advice? Anyone knows where I can get a stem with only a metallic screen and no glass screen?
 
MysticVaper,
  • Like
Reactions: ataxian

ataxian

PALE BLUE DOT
I recently purchased an Arizer Solo newer model. I'm having trouble due to material going through the holes in the glass screen. I tried cutting an installing a metallic screen but no matter what I do I can't get the metallic screen to stay inside the stem. Anyone has tips or advice? Anyone knows where I can get a stem with only a metallic screen and no glass screen?
Your kidding right?
On ebay I got over 100 1/2 SS Screens (less than $5) that will last a long time. When I clean a GonG or a Stem I reuse the screen if it's in good shape.

You cut your own screens?
Your awesome!
http://www.ebay.com/itm/100-1-2-50-...362?pt=LH_DefaultDomain_0&hash=item461c3e287a
 
Last edited:
Top Bottom