• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Arizer Solo

Torontoke

Member
Yes I checked the spam folders. No sign of any response from arizer. I'm sad I thought it would of been here by now I can't believe it's taking so long and I didn't even get one response.
 
Torontoke,

CarolKing

Singer of songs and a vapor connoisseur
New models have more airflow? Darn i was thinking its hard to inhale. If i push my bent stem all the way down it will pretty much block airflow entirely. I lightly twist and pull up on the stem, while inhaling, so i can feel when the air holes are no longer blocked.

I still have yet to "milk" a rip. Was wondering about the speed of inhaling. I notice the temp reading drop when i inhale. Im getting vapor but not the huge clouds i had myself pumped up to see.

Does humidity effect the density of vapor we observe during exhale? Its dry as fuck where i live. Can i start blaming the weather???

The battery talk has been on my mind all day. Read your reply this morning OF. Tripping me out man. Trying to absorb it all. Definitely have some questions. The part about stopping the charge early is hard to swallow. Goes against everything i have ever read regarding Lithium batteries.

What chemistry are these batteries anyway? Im mostly familiar with Lithium Polymers used on RC toys. Guessing vaporizers use a more stable battery so we dont light our pockets on fire?
My new Solo isn't that much different from my old model Solo except for the airflow and being able to charge and use. The new model with the stock stems work like the older model with the PVHES stems.

I get a rich vapor flavor with big thick clouds with both units. The only wispy clouds that I get are when the stem is still warming up. Slow and steady draws will get you the thick vapor clouds.

If you continue to have problems with wispy weak vapor, you may have a defective unit. Your draw shouldn't be that restrictive with the newer model, but maybe units vary, I don't know. The draw needs to be somewhat restrictive, too easy of a draw isn't good either.

Don't worry about all the potential battery problems it looks like a new battery is fairly easy to change if it comes to that. I'm using my new Solo most of the time without being plugged in. With the long battery life, like 2+ hours. I charge it up when the light gets down to one. I do try not to overcharge. I do use my older Solo with the PA. This is a kick ass unit whether it's the old or new model.

You need to relax and enjoy.:smug:
 
Last edited:

cawshook

Solod out.
Is it ok if i clean the stainless steel under the bowl when its still hot? I put some oil in the solo and some of it dripped to the bottom, its been dirty for like a month. So hard to clean, any tips?
 
cawshook,

Tstat

Dead Foot Designs
Accessory Maker
I just happen to have the show "Grimm" on and two of the characters are hitting a silver Solo. Husband and wife, wife has cancer, I guess. I never watch this show, but that was cool!

Edit: actually the show is called "Hannibal" :)
 
Last edited:

spoutti

Well-Known Member
I still say , we should refer it as VIN ( Vaporizer Identification Number ) . We have to call it something ...

We can disagree all we want about the significance of the VIN .
Whether it's for sequential or the latest released .
But be sure , Arizer applies an ID #on every unit manufactured
and shipped out for a reason .

It's ill advised biz. practices to manufacture products , and Not keep account/inventory of what is made and sold .

I work in the Pharmaceutical Industry , where we have DIN .
Drug Identification Number on every bottle/pkg/vial/blister
we sell . That's in case , we have a recall on a certain medicine .
We can trace it back to the specific batch/time it was made .

I bring this up , because sometimes , I sense some bad vibes over this one specific topic . When there really shouldn't be ...
People do ask about the alpha-numerics located at the bottom .
And I do believe it's an ID # of sort .

So VIN for the Win .
My Solo's VIN is an M107 , and never gave me any problems
right from the get go . Still rocking after 2 1/2 years .
An M107 , that's the one you should be looking for , if you can still find one ...

Happy Vaping Y'all
/
I think we should refer to the purshase date instead of VIN. I presume people looking into forums will tend more to buy from a good priced reputable dealer. Wich leads always fresh solos. So purchase date is more accurate i think.

I have 2 solos from may2013 M1A and now march2014 M1A can charge and heat.. Could get confusing some day.

Is it ok if i clean the stainless steel under the bowl when its still hot? I put some oil in the solo and some of it dripped to the bottom, its been dirty for like a month. So hard to clean, any tips?
Fine ss screen, qtips with iso. Just mop pushing the screen with the isoed qtip. I was afraid to scratch the bowl this way, but i was wrong. Excellent tech from @poonman
 

combustopedia

New Member
To give you guys an idea of how big the solo is, or for a cool way to store your solo, I managed to fit my Arizer Solo perfectly into a spray axe deodorant bottle. The axe spray bottle has a circumference 1mm larger than the solo fir a snug fit. The way to build this(at your own risk):

1. Spray the axe deodorant until it is 100% finished.
2. Pull off the top plastic cap without breaking it. Put this aside for later.
3. check to make sure all the axe is out by holding the can upside down and pressing the spray nozzle to release all the liquid inside.
4. Once all the pressure and liquid is gone, carefully use a knife to cut into the black metal part at the top of the can to cut off the part attached to the spray nozzle. Work your way around the can to cut the top part off to leave a metal axe cup remaining.
5. Sand down the top of the metal cup with a metal file to smooth is out.
6. Once the edges are smooth, wash out the ace container a million times until there is no more axe smell inside the aluminium container.
6. Once the edges are smooth, try to fit the Arizer solo into the Axe cup. You may need pliers to bend the metal a little outwards to create a sort of funnel to receive the solo.
7. once the solo is in, carefully, and in a surgical like manner, cut out the inside of the ace plastic cap. Do this so that the end goal is making it so that you can pull the plastic spray button up to fit the arizer solos stem.
8. screw off the top of the solo. It still works if you use it this way.
9. put the solo into the axe cup and pop the plastic cap on. you now have an awesome solo case, which when you want to use, you can by pulling up the button on the case and popping in the stem, and vaping up.

Note, you can also fit the entire solo into the axe can upside down. the top metal piece prevents the plastic cap from fitting back on.
 

tdriver

Well-Known Member
To give you guys an idea of how big the solo is, or for a cool way to store your solo, I managed to fit my Arizer Solo perfectly into a spray axe deodorant bottle. The axe spray bottle has a circumference 1mm larger than the solo fir a snug fit. The way to build this(at your own risk):

1. Spray the axe deodorant until it is 100% finished.
2. Pull off the top plastic cap without breaking it. Put this aside for later.
3. check to make sure all the axe is out by holding the can upside down and pressing the spray nozzle to release all the liquid inside.
4. Once all the pressure and liquid is gone, carefully use a knife to cut into the black metal part at the top of the can to cut off the part attached to the spray nozzle. Work your way around the can to cut the top part off to leave a metal axe cup remaining.
5. Sand down the top of the metal cup with a metal file to smooth is out.
6. Once the edges are smooth, wash out the ace container a million times until there is no more axe smell inside the aluminium container.
6. Once the edges are smooth, try to fit the Arizer solo into the Axe cup. You may need pliers to bend the metal a little outwards to create a sort of funnel to receive the solo.
7. once the solo is in, carefully, and in a surgical like manner, cut out the inside of the ace plastic cap. Do this so that the end goal is making it so that you can pull the plastic spray button up to fit the arizer solos stem.
8. screw off the top of the solo. It still works if you use it this way.
9. put the solo into the axe cup and pop the plastic cap on. you now have an awesome solo case, which when you want to use, you can by pulling up the button on the case and popping in the stem, and vaping up.

Note, you can also fit the entire solo into the axe can upside down. the top metal piece prevents the plastic cap from fitting back on.

...pics please....
 

fernand

Well-Known Member
Where is the SEARCH function on this forum?

Can someone help with the best ways to vape small amounts of oil with the Solo?

And on the newer units (the ones that can be used with charger plugged in) - how do you tighten the o-ring around the stem?
 
Last edited:
fernand,
  • Like
Reactions: ataxian

Tstat

Dead Foot Designs
Accessory Maker
Haha, I didn't see that part. I just happened to switch to it after my basketball game was over and saw her hitting it. I yelled to my (sleeping) wife to look at what they were doing. She wasn't as psyched as I was, to say the least. So I took another couple of hits and we both slept, LOL.
 

Dr. Soxhlet

SOLO Vaporized Cannabis is my Best Medicine
I put o ring in new model but now I feel I get smaller clouds. Why?

:smug:
You can try pulling the stem up maybe 1/16 inch or so to give a little more airflow. The new Solo I have worked well without one, but I had to manually keep pushing that black factory ring back down to keep it flush with the top of the heater chamber. I found that an old plastic 35mm film canister rotated with gentle pressure made a fine tool for this pupose, although the manufacturer advises to only use your finger.
I finally just installed the "O" because that was easier as once it is in place it can be just left there. Another trick is to cut small knotches in your #113 "O" ring(not the factory ring), but I have never needed to do that myself.
When I bought the Solo, I never thought it possible that it would replace my EQ which I have had for about 4 years, but the Solo works so well and is much easier to use. But as a backup and showpiece the EQ will always have its' place. People really freak out when they see it even has a remote control.:rofl:
 
Last edited:

ataxian

PALE BLUE DOT
I'm hoping the oils will have enough CBD to be useful until the next crop comes in.

Making your own medicine is tricky.
Whats nice is you control the cure to work well in the SOLO.

The better top shelf strains 4 is my level.
If my legally grown flowers vape at level 4 I believe I cured correctly. (slow cure)
I know there are many portable vaporizer that people adore. The reason I like my SOLO'S as much as I do is because I use them for reference points.
Just so happens I get medicated at the same time.
 
Last edited:

DDave

Vape Wizard
Accessory Maker
The battery caps for the MFLB fit over the bowl on the stem perfectly. You can load the bowl and cover it with the cap.
Don't believe these caps are heat resistant. Take care not to cap too soon after a session, so not to melt the cap!

Mine does the same thing!
+1 same. No problem to report here.
Is it ok if i clean the stainless steel under the bowl when its still hot? I put some oil in the solo and some of it dripped to the bottom, its been dirty for like a month. So hard to clean, any tips?
I use round wooden toothpicks, sometimes dry - sometimes dipped in ISO, works well to take off stubborn particles and goo without scratching the oven.

DISCLAIMER: Try in a small, inconspicuous area of the oven before committing to this practice!!!! DDave takes no responsibility for damage caused by the Kids from the Age Of "Don't Try This At Home".... LoL :lol:

I put o ring in new model but now I feel I get smaller clouds. Why?

:smug:
Smaller clouds usually result from increased airflow. Draw slower to see if there's a difference.

Ever see anybody pack the oven instead of the stem???
I sense a nightmare cleaning scenario here!!!!
 

johnnyuber

New Member
Received my new Solo today! ... very impressed with the craftsmanship, and ease of use ... tastes great and my lungs don't burn ... Took a little longer for a session, but I feel great!

Their instruction leave a little to be desired, but thanks to all of YOU I have all the info I need and a sweet solution out of the box!

Even pulled through water on my first session (very carefully... glass on glass) WOOT!

Now I have to locate and purchase every accessory I can find!

Happy Daze!
 

ataxian

PALE BLUE DOT
Can someone help with the best ways to vape small amounts of oil with the Solo?
I had the SOLO for sometime before I was told to use COTTON (small piece) wrap around some wax.

When I do this I put the SOLO on level 5 (one level higher than my usual).

I use wax pens for concentrates usually. However the SOLO works pretty good actually with this method!

Your can use any cotton however I use FINN'S organic. You would think that since vitamin bottles use food and pharmaceutical grade cotton so I don't see why you couldn't use that?
Received my new Solo today! ... very impressed with the craftsmanship, and ease of use ... tastes great and my lungs don't burn ... Took a little longer for a session, but I feel great!

Their instruction leave a little to be desired, but thanks to all of YOU I have all the info I need and a sweet solution out of the box!

Even pulled through water on my first session (very carefully... glass on glass) WOOT!

Now I have to locate and purchase every accessory I can find!

Happy Daze!
http://www.dhgate.com/product/d020-bubbler-hand-blown-glass-vase-perc-water/175832535.html#s1-1-1|3284504607
Don't let the price scare you!
I have very expensive pieces that don't work as good as this one!

http://www.planetvape.ca/pvhegong-high-efficiency-gong.html

GonG's 18mm or 14mm (I have both)
GonG's PHVES or STOCK (I have both)
 
Last edited:

poonman

Well-Known Member
Where is the SEARCH function on this forum?

Can someone help with the best ways to vape small amounts of oil with the Solo?

I like this way myself , Drop a drip of oil onto the herbs .
Then cover it up a little bit with herb , to keep the oil in
the middle somewhat . Try to have it further away from the oven
so it doesn't melt down and stain it . The herbs should soak up the oil after it's heated . It works for budder/wax too .
Here's a pic , enjoy .
fHkkQMv.jpg
 

ataxian

PALE BLUE DOT
I like this way myself , Drop a drip of oil onto the herbs .
Then cover it up a little bit with herb , to keep the oil in
the middle somewhat . Try to have it further away from the oven
so it doesn't melt down and stain it . The herbs should soak up the oil after it's heated . It works for budder/wax too .
Here's a pic , enjoy .
fHkkQMv.jpg
I like wax or oil by it's self.
Some like to mix it with flower and love it.
Whatever you prefer!
I use a little too much heat for flower to vaporizer the concentrate.
I'm so funny about flavor.
I like the lower levels for flower.
That's why I keep them separate!

Whatever you like!
 

fernand

Well-Known Member
I like wax or oil by it's self.
Some like to mix it with flower and love it.
Whatever you prefer!
I use a little too much heat for flower to vaporizer the concentrate.
I'm so funny about flavor.
I like the lower levels for flower.
That's why I keep them separate!

Whatever you like!

Eggzactly!

Metal wool works OK too. Anybody know the combustion temp of cotton? I would guess same as other cellulose, like paper and cannabis plant matter.
 
fernand,

Caligula

Maximus
Eggzactly!

Metal wool works OK too. Anybody know the combustion temp of cotton? I would guess same as other cellulose, like paper and cannabis plant matter.

http://en.wikipedia.org/wiki/Cotton#Critical_temperatures

Note that the "fire point" requires exposure to an open flame. Since this obviously isnt the case, thats not a good indicator of how this would act in a convection style vape. Instead, Id be looking towards the "auto ignition" end of the spectrum... which is WAY hotter than any convection vape can get (that I know of), let alone a Solo.
 
Top Bottom