Gear "Oil Slick" products REVIEWED

Hey fellas, just noticed this thread...
I've used a few of their products over the last 6 months+ or so. I first started with with the v2 slick pads in an attempt to stop scraping Pyrex. At first I thought it was pretty slick, but after a hand full of trials with varying results, I decided to shift gear towards their slick sheets. As a liner, it seemed to work pretty well, but I did notice sometimes some(very little) seeps through it. I was some what alright with it until I went to my lhs a month+ ago and they had a v2 that is pure PTFE, no mesh just a smooth PTFE sheet.
It works really, really well. Nothing leaks, its so thin that the heat transfer is nearly instant. Mine goes straight from the pyrex to sit on ceramic tile in my vac chamber which sits on the Nuwave induction thing keeps everything right in between 110-120.
I'm very happy with 100% PTFE, and don't think silicone will be used for anything but storage. One con I see compared to v1 slick sheet, is that it's tougher to fold into a liner, but it's not terrible to work with.
The stuff is good for storage as well, fold it up and slap it in a jar, no loss, and no constant touch to silicone.
As for the containers, I've tried plenty, and NoGoo and slik stak are my favorite. The Slick Stacks, to me, do a terrible job at keeping the smell in. The Nogoo are nice, but the top has crevasses that catch stuff if really full, I don't use the threads, I just made a little mark where to line it up, then just jam it on like a slick stack. I really like the rounded bottom of the slikStak, but the lids are wonky. Lol, can't win, or I'm too picky.

Edit:had to edit the container area for proper names, I did not have the actual brands right.
 
Last edited:

MileHighLife

Blower of glass, grower of grass
Hey fellas, just noticed this thread...
I've used a few of their products over the last 6 months+ or so. I first started with with the v2 slick pads in an attempt to stop scraping Pyrex. At first I thought it was pretty slick, but after a hand full of trials with varying results, I decided to shift gear towards their slick sheets. As a liner, it seemed to work pretty well, but I did notice sometimes some(very little) seeps through it. I was alright with it until I went to my lhs a month+ ago and they had a v2 that is pure PTFE, no mesh just PTFE.
It works really, really well. Nothing leaks, its so thin that the heat transfer is nearly instant. Mine goes straight from the pyrex to sit on ceramic tile in my vac chamber which sits on the Nuwave induction thing keeps everything right in between 110-120.
I'm very happy with 100% PTFE, and don't think silicone will be used for anything but storage. One con I see compared to v1 slick sheet, is that it's tougher to fold into a liner, but it's not terrible.
The stuff is good for storage as well, fold it up and slap it in a jar, no loss, and no constant touch to silicone.
As for the containers, I've tried plenty, and NoGoo and slick stack are my favorite. The Slick pad brands, to me, do a terrible job at keeping the smell in. The Nogoo are nice, but the top has crevasses that catch stuff if really full. I really like the rounded bottom of the slickStak, but the lids are wonky. Lol, can't win, or I'm too picky.

What is lhs? I need one of these PTFE sheets.

Edit: other than slick sheet ... no me gusta

Double edit: I'm retarded local head shop duh ... I'll have to check out that v2 :p
 
Last edited:
MileHighLife,

2clicker

Observer
Last edited:

MileHighLife

Blower of glass, grower of grass
@2clicker silicone breaks down when exposed to butane so if you evaporate butane off of silicone you can end up with silicone in your oil which is a major health hazard. PTFE and pyrex are the way to go with bho runs but the old slick sheet (which was PTFE) was a pos imo ... hoping this v2 is easier to work with.

If you're evaporating alcohol silicone is ok
 
i think this is what you want even though the pic looks incorrect. it clearly states its PTFE and not silicone.

http://www.amazon.com/Slick-Sheet-P..._3?s=industrial&ie=UTF8&qid=1388376718&sr=1-3

so HAL... you think this stuff is better for evaping out of instead of a slick pad? can it be used multiple times? $30 for 48" X 16" seems a bit pricey, but if it works really well then im all over it.
I think that's the original stuff, notice the box, it has some sort of mesh or something.

If your using alcohol, look in to it to make sure it's good for them. I haven't used them with everclear yet.
I used one up to six times, they don't warp or deteriorate, so you could probably go more. Just don't pierce it with tools, it's super thin.

edit: I'll put up a pic of it before bed, so there is no confusion with the original stuff.
 
Last edited:

2clicker

Observer
I think that's the original stuff, notice the box, it has some sort of mesh or something.

If your using alcohol, look in to it to make sure it's good for them. I haven't used them with everclear yet.
I used one up to six times, they don't warp or deteriorate, so you could probably go more. Just don't pierce it with tools, it's super thin.

edit: I'll put up a pic of it before bed, so there is no confusion with the original stuff.

i do notice the box in the pic, but the description says "PTFE Teflon". so i figured that meant its the new stuff.
 
2clicker,

2clicker

Observer
I think (don't quote me), the original stuff says that as well, we're looking for 100% pure PTFE. Check your inbox, no need to order some yet...

what a community! :rockon:

i found this resource Chemical-Resistance

Material Selected:Silicone
Alcohols:Ethyl

  • B = Good -- Minor Effect,
    slight corrosion or
    discoloration.
i would use the PTFE. it gets an A rating

this is the info i saw. thought i saw it somewhere else here on FC, but couldnt find it recently. anyway after seeing this i was unsettled about it and sent out some emails to the MFGs.

Oil Slick said:
"While Oil Slick pads are not designed for concentrate production quite like the Oil Slick Sheet..
Oil Slick pads are safe to be exposed to ethanol!
You may find some discoloration but you will not have any chemical reactions take place between the silicone and the ethanol, compared to what you may find with silpats or other food grade silicone products (including parchment).

Oil Slick silicone products use the highest quality silicone available (platinum cured medical grade) to ensure that there is no reactions that take place between your oil and the silicone."

NoGoo said:
"We don’t recommend any solvents be used directly with any silicone products."

Dab Wizard hasnt responded yet.

not sure of the validity of what Oil Slick stated, but the PTFE does sound better all around. aside from it being disposable.
 
Last edited:

MileHighLife

Blower of glass, grower of grass
i found this resource Chemical-Resistance

Material Selected:Silicone
Alcohols:Ethyl

  • B = Good -- Minor Effect,
    slight corrosion or
    discoloration.
i would use the PTFE. it gets an A rating





.

I like that tool ... silicone with isopropyl alcohol receives an A

Material Selected: Silicone
Chemical Compatibility
Alcohols:Isopropyl A-Excellent

Makes sense cause ethyl alcohol is both polar an non-polar.
 
Last edited:

2clicker

Observer
so i have been using the OS PTFE slick sheet to evap my QWET runs in. works damn well, but removing the oil from the sheet can be as tedious as scraping it up. when using the "stick n rip" method you can get most of it, but it takes some time. and if its shatter (mine always is) small bits will flake off and get all over.

starting to think that i can collect more faster using a razor.

anyone have the same experience with the ptfe slick sheet?
 

2clicker

Observer
i would love to use one of the pads or competitor silicone dish, but when you check compatibility with silicone and ethanol its not a great match.

its not likely that anything negative would happen, but im not taking any chances.

i was hoping to just peel the oil off the slick sheet, but it just doesnt work that way.

besides if you warm the glass slightly while scraping it comes out very easily. unless a new product comes out im back to the razors.
 

johnnyblaze805

Certified Dankologist
No I'm not... I've done plenty of research before I started. Thanks for your concern tho :) I felt pretty well prepared heading in.. Here's some pics of my 1st run I think my research paid off!! :tup: these pics we're takin after it's been on the griddle for 3 hours . It's been 8+ hours now and still goin strong!!!!

 

aesthyrian

Blaaaaah
May I ask what the purpose of the cheesecloth underneath the slick sheet is? Can't say I've ever seen that done before so I'm just curious.
 
aesthyrian,

aesthyrian

Blaaaaah
In the largest photo. There is what looks like cheesecloth in the pyrex dish underneath the slick sheet.
 
aesthyrian,
Top Bottom