VaporBlunt 14.4 mm Micro-shower (PNWT) vs. PlanetVape f-BOMB

mystikalghost

Well-Known Member
For $50 I don't think you could go wrong. But it all depends on what you're planning on hooking it up to.
I just bought a KISS cart so one of those. Using it with an ego twist. I saw a video of someone here using the PNWT on a KISS.
 
mystikalghost,
  • Like
Reactions: Caligula

Caligula

Maximus
Just watched the video again. @Caligula what is that plasic piece you put over the KISS cone? Did it come with the PNWT or did you buy it somewhere?

Its just one of these with the tip cut off:

ECIG-TESTERS-2.jpg


FYI the KISS cart will fit in the PWNT without it, just remove the mouth piece and itll still seal. I use the silicone piece to just add a bit of stability.
 

Philreal187

Well-Known Member
I receive my pnp water tool yester day that was on back order since February 7th from theyoyokid on ebay. I was very pleased with the vape being filtered thru the water really makes for a smooth hit, first time I have every hit a vape thru water. I did have a concern tho, I noticed I did not have a pinnacle logo on the glass and the stem that the vape first travels thru is bent. it works but I'm not sure if this isn't the original vb 14mm water tool. If I cant get a clear enough picture ill post it. Just wanted to see if anyone else has noticed the same.
 
Philreal187,
  • Like
Reactions: SSVUN~YAH

ataxian

PALE BLUE DOT
Just wanted to see if anyone else has noticed the same.

I don't know if this is the case for a lot of people however this is what I found.

The PNWT may work well with the PINNACLE however for the SOLO a Bubbler works 100x better.
That is sooooooo sick but $100 :(.
Pretty cheap since it works better.
The mouth piece on the GBD one is much better!
 
Last edited:

olivianewtonjohn

Well-Known Member
I receive my pnp water tool yester day that was on back order since February 7th from theyoyokid on ebay. I was very pleased with the vape being filtered thru the water really makes for a smooth hit, first time I have every hit a vape thru water. I did have a concern tho, I noticed I did not have a pinnacle logo on the glass and the stem that the vape first travels thru is bent. it works but I'm not sure if this isn't the original vb 14mm water tool. If I cant get a clear enough picture ill post it. Just wanted to see if anyone else has noticed the same.
Get a picture up! Yeah I love my 14mm for the flavor. Much better than the d020 bubbler I have. But I love the bubbler for the smooth hits lol
 

ataxian

PALE BLUE DOT
Get a picture up! Yeah I love my 14mm for the flavor. Much better than the d020 bubbler I have. But I love the bubbler for the smooth hits lol
Weird?

I couldn't get the PNWT to work?
The D020 worked with out a learning curve? I also have a water tube with a 18mm connection and a removable mouth piece that is wonderful however 3x the price .
The D020 was $28 including postage!
 
ataxian,

olivianewtonjohn

Well-Known Member
Weird?

I couldn't get the PNWT to work?
The D020 worked with out a learning curve? I also have a water tube with a 18mm connection and a removable mouth piece that is wonderful however 3x the price .
The D020 was $28 including postage!
I agree the d020 is the best bang for the buck I mean 28 with shipping, crazy talk. Much lower learning curve, the PNWT takes a small amount of water so its more finicky; to really get low resistance I found I have to go alittle ways above the slits but its easy to end up with too much water. Once I got it down though its no big deal
 
olivianewtonjohn,
  • Like
Reactions: SSVUN~YAH

Philreal187

Well-Known Member
http://imageshack.com/a/img42/3743/fzjq.jpg

Here is the pnp water tool I received a few days ago. If u look at the stem where the vapor first enters the tool u will notice its not straight it curves a little at the top. it seems to work but if I got to much water it shoots in up in to the next chamber then to my mouth haha if I have just a little less it wont bubble at all. My first concern was that it had no pinnacle logo on the glass and also that stem issue. I do enjoy it and love how it cools the vapor, just wanna make sure I didn't get a cheap knock off.
 
Philreal187,
  • Like
Reactions: SSVUN~YAH

olivianewtonjohn

Well-Known Member
http://imageshack.com/a/img42/3743/fzjq.jpg

Here is the pnp water tool I received a few days ago. If u look at the stem where the vapor first enters the tool u will notice its not straight it curves a little at the top. it seems to work but if I got to much water it shoots in up in to the next chamber then to my mouth haha if I have just a little less it wont bubble at all. My first concern was that it had no pinnacle logo on the glass and also that stem issue. I do enjoy it and love how it cools the vapor, just wanna make sure I didn't get a cheap knock off.
You can double check with pinnacle but I dont know of any cheap knockoffs; I have not seen a Chinese version on the market. Its likely they did without the logo or you got an older one. Mine isnt perfect either and you wouldnt be the first to report it. I find getting some water in the upper chamber is normal and I dont drink any water unless I pull too hard. I fill it up basically to the max level without it leaking out, need to fill it up slowly to do this otherwise the pressure will cause to to leak out.
 

froidy

Member
Hi guys, new to the forum and a vape noob! I'm from Australia. I'm looking to do this properly from the start and get an Arizer Solo with the Pinnacle Water Tool. This listing says it comes with an PonG adapter included. Would anybody be able to help out a newbie and tell me if this adaptor will allow the Pinnacle Water Tool to attach to my Solo? Thanks in advance guys! Great forum you have here :)

http://www.ebay.com.au/itm/Pinnacle...679?pt=LH_DefaultDomain_0&hash=item27e49f29a7
 
froidy,

froidy

Member
The SOLO requires a 14mm glass on glass adapter (GonG)
Thanks Ataxian, silly me, I did read somewhere that it used a GonG adapter but then read the PonG and thought I was home free!
I might struggle to find one here in Aus, hopefully I can source one from the US. I also found this on eBay but not 100% sure if this will do either?

http://www.ebay.com.au/itm/Pinnacle...009?pt=LH_DefaultDomain_0&hash=item27e3a76541

The seller said it will only work with the Pinnacle Pro but I wasn't sure if that was just the standard reply because 'like me' he doesn't know?
 
froidy,
  • Like
Reactions: ataxian

froidy

Member
Keen as to get the Solo! All the reviews have said it is the go and I have done a fair bit of research. Obviously there are vapes out there that do certain things better but for all round use it will be great for me. Especially since I'm using it mostly at home. I'm getting the newer 'pass through' design also :) Lot of great info here! I'm about to start on the 1200+ pages of the Solo thread!!
 
froidy,

ataxian

PALE BLUE DOT
Thanks Ataxian, silly me, I did read somewhere that it used a GonG adapter but then read the PonG and thought I was home free!
I might struggle to find one here in Aus, hopefully I can source one from the US. I also found this on eBay but not 100% sure if this will do either?

http://www.ebay.com.au/itm/Pinnacle...009?pt=LH_DefaultDomain_0&hash=item27e3a76541

The seller said it will only work with the Pinnacle Pro but I wasn't sure if that was just the standard reply because 'like me' he doesn't know?
The hydro tube can be found for about $20 or less.. online
GonG's you need to buy from planet vapes their a Canadian Web company and very reliable.
I like ash collectors and Jhooks way better.
You did mention stealth!
Your needs may be different than mine?
 
ataxian,

froidy

Member
Hmmmm I really am a noob....haven't heard of the ash collectors or the jhook ? More researching to be done obviously! haha If anyone knows it the adapter I posted above will do the job with a Solo that would be awesome as well! Cheers all :)
 
froidy,

olivianewtonjohn

Well-Known Member
Hmmmm I really am a noob....haven't heard of the ash collectors or the jhook ? More researching to be done obviously! haha If anyone knows it the adapter I posted above will do the job with a Solo that would be awesome as well! Cheers all :)
The pinnacle water tool is designed to work with pinnacle vaporizers. It comes with adapters for pinnacle vaporizers. Since the water tool uses a 14mm connection you can use the solo with it if you buy an adapter designed for the solo.

Planetvap is currently closed but will reopen soon otherwise id link you to the adapter.

http://www.vapefiend.co.uk/images/source/pvhegong_14.18mm.png

Are you buying the hydrotube for a specific reason? Reason I ask is because IMO there are better pieces for the $.

http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/
 
olivianewtonjohn,
  • Like
Reactions: Reflexion

froidy

Member
The pinnacle water tool is designed to work with pinnacle vaporizers. It comes with adapters for pinnacle vaporizers. Since the water tool uses a 14mm connection you can use the solo with it if you buy an adapter designed for the solo.

Planetvap is currently closed but will reopen soon otherwise id link you to the adapter.

http://www.vapefiend.co.uk/images/source/pvhegong_14.18mm.png

Are you buying the hydrotube for a specific reason? Reason I ask is because IMO there are better pieces for the $.

http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/

Thanks heaps Olivia!
No real reason I was going for the hydrotube, it's just all I knew about being a noob :) I just wanted the best for my Solo and heard the glass water tube attachment was great for a little more vapor, flavor and cooling it down.

My biggest issue is being a noob with this gear AND trying to find it and get it shipped to Australia :)

Really appreciate the advice :)
 

froidy

Member
I think I'll be okay if I can just find a 14mm GonG Adapter. Nobody here sells them and the one place over there that does (Planet Vape) is down haha

Haven't been able to find much on ebay except this but even though it says GonG it looks like PonG?

http://www.ebay.com.au/itm/Pinnacle...009?pt=LH_DefaultDomain_0&hash=item27e3a76541

In the end I think I will have to go the expensive route is these guys are some of the only ones I can find that ship to Australia. Just can't really know for sure if that adaptor will do the job.
 
froidy,
Top Bottom