Various e-cig type Vaporizers

deadheadbill

I can see clearly now the smoke is gone...
So, I'm actually looking for the opposite as above. I have an Omicron, but want to use the cheaper carts, therefore I need a m601 batt to 510 cart.

I have searched, but the only ones I have found are around 10 bucks. I looked at the above links but found nothing that I saw would work.

I know I can get them from PV, but at 10 bucks plus shipping I'd like to find a cheaper source?
 
deadheadbill,

mystikalghost

Well-Known Member
So, I'm actually looking for the opposite as above. I have an Omicron, but want to use the cheaper carts, therefore I need a m601 batt to 510 cart.

I have searched, but the only ones I have found are around 10 bucks. I looked at the above links but found nothing that I saw would work.

I know I can get them from PV, but at 10 bucks plus shipping I'd like to find a cheaper source?

Gentlemans sells them but they are $10 for 1. I would say check ebay. I found 3 adapters for $10. Past that...it's tough. According to the e-cig industry 601 is an old threading so it's tough to find adapters.

I called 15 local vape stores the other day and ZERO had anything other than 510 devices.

These last 3 weeks have been a nightmare. The night before I am able to use my KISS cartridge, the threading on my EGO decides to strip. Fuck I am so angry. Is there anything I can do?
 
Last edited by a moderator:

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
These last 3 weeks have been a nightmare. The night before I am able to use my KISS cartridge, the threading on my EGO decides to strip. Fuck I am so angry. Is there anything I can do?

nope nothing really but im willing to make you a deal.


Send it in to us and we will fix it for you for free.


All part of my Give back to the community spirit.
 

mystikalghost

Well-Known Member
nope nothing really but im willing to make you a deal.


Send it in to us and we will fix it for you for free.


All part of my Give back to the community spirit.

If I have any trouble with my adapters tomorrow, and I know I will, I would love to take you up on that. :clap::clap::clap::clap:

Basically right now my cartomizers are sliding in, don't stop screwing, and never get tight. 2 days ago this was not the issue. I will send you a PM tomorrow if necessary and we can go from there

Thank you.
 
mystikalghost,

arrr

Well-Known Member
Yes ,I havent tried it yet since the one I got is a few day old, but I have rebuilt vivi nova heads and this seems the exact same.

@arrr
The heads are like every oil cooker on the market or most ecigs, the head has a center pin that makes contact with the battery the negative post is the threads of the head. So essentially one wire is your positive that runs to the center pin, the negative runs on the outside of rubber seal around center pin, you end up with a wire to the center pin and one on the outside ofthe rubber grommet with takes the negative wire to the threads.





I agree , pure gold and the sapphire "bud atomizers)!!!

@BLAZING OG I was wondering if you tried rebuilding the bulb atomizer yet.
 
arrr,

BLAZING OG

Vaping is a way of life!
@BLAZING OG I was wondering if you tried rebuilding the bulb atomizer yet.
I did , and it was a no go on that particular one.
The wires are so tiny that my gauge woudnt fit in the little holes, and they seem to glue in the wires, so its a PITA to try to rip them out.
I have a few others I might order to try out, but the bulb works great so far just cant rebuild it.
I have been using co2 syringe oils in the bulb with much better results and great flavor.


 

Andijo81

Member
I have tried soooo many different atomizers! I currently use an Evic w/ a few different atomizer's. I liked the globe but I broke them a lot, regardless of glass thickness/quality. I also find after some use it becomes harder to pull thru. When using the globe I tried the basic ceramic atomizer, steel sleeve w/ wick and pankcake. My preferred choice are the steele sleeve w/ wick from Divine Tribe. I have tried the VHIT A, B, C, and ReLoad for dry. Divine Tribe's Globe's, Stainless Steel Pancake & Coil, 510 Divine Tribe atomizer. The Cannon, Micro Vaped Skillet's, Q2 Ceramic Cup Tank RBA, Yocan Exgo, and a few other RBA's. I also just received The Hound but am nervous about using it. So far I really like the Yocan Exgo, It has a nice sized cup, thick glass, spring loaded contact pin on the bottom, and airflow holes in the bottom. Never hard to pull thru. My main complaint is the mouthpeice. I like The Cannon a lot, sturdy, all steel, dual coil, and way more "Legit" looking. My complaint w/ this piece is that it's cup is surrounded by a metal mesh that seems to absorb a lot of product. I have a Ithake Golden Greek on the way and am pretty excited to try it.

Sorry, that's a lot for my first post. Until now, I've been going at this alone. Not a lot of info on these type's of item's at any of local retailers, so I've just kinda had to figure it out myself. A lot of trial and some error. Good purchases and bad... puffit:(
 
Last edited by a moderator:

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
What's up everybody, I've been researching on the Okeanos but I also came across this,

http://www.dabstix.com/mobile/Product.aspx?ProductCode=WaterperkAttatchment

Seems like the same thing, I figure this would be the place to get some insight. Thanks.


And to note the wickless cartridge works great, a huge improvement over the regular globe heater attachments.

Thats plastic No? Not knocking it but seems there are threads on the bottom like the vivi nova tank. Im gonna def order one to see. Good find I like to see innovation.
 
Last edited:

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
http://www.dhgate.com/store/product/2013-high-quality-changeable-temperature/170224066.html
2013-high-quality-changeable-temperature.jpg

Never saw temp read on ecig before . Otherwise cheap shit imo :)
"
(b) Temperature can be regulated by press the thermoregulation button for different vapor. The adjustable range is between120°~250°. Temperature, can be locked by press the +,- buttons at the same time . and to press the +,- buttons at the same time to open the lock."
 
Last edited:
Abysmal Vapor,

ataxian

PALE BLUE DOT
http://www.dhgate.com/store/product/2013-high-quality-changeable-temperature/170224066.html
2013-high-quality-changeable-temperature.jpg

Never saw temp read on ecig before . Otherwise cheap shit imo :)
"
(b) Temperature can be regulated by press the thermoregulation button for different vapor. The adjustable range is between120°~250°. Temperature, can be locked by press the +,- buttons at the same time . and to press the +,- buttons at the same time to open the lock."
*make sure the heating element is made of T2 and not some crap!
 
ataxian,
Has anyone tried the Source ORB attachment? Its dual coil, supposedly Gr 2 ti coils. Also available with ceramic instead of the normal wick...


Boom E-Bob 2-in-1 Wax Percolator Vaporizer
VN-Ebob-web3.jpg




Alien Water Attachment
 
Last edited:

FlyingLow

Team NO SLEEP!
Where do you all recommend I go for the cheapest pen replacement parts?
Say I wanted to go to a larger battery, buy spare nail/coils or domes.
 
FlyingLow,

mystikalghost

Well-Known Member
Where do you all recommend I go for the cheapest pen replacement parts?
Say I wanted to go to a larger battery, buy spare nail/coils or domes.
If you are an extremely patient person, fasttech.com. It all comes from China but it is very cheap. It will take a while to get to you. If you are less patient and have a little more money, ebay.

I think of it like using ebay to pay to get the item to me fast. If something goes down and I NEED a replacement, ebay. Fasttech is for planning ahead.
 

FlyingLow

Team NO SLEEP!
I have been using the Coil w/wick Ceramic pictured above. Thanks for posting the picture.

What are the benefits of all the different nails/coils?
Should I look to change nails, or just get what I have been using?
 

707vallejo707

NorCalLeftSideWe$tSide
The wick design is just the older style coils. I found the fibrous wick does wear out. The rod coils are a lot more improved as far as flavor. You can burn them dry and not worry about burning the atomizer out.
 
Top Bottom