Arizer Solo

JustAnotherToker

Well-Known Member
Mine dose not go off but just down to one and i have to re set temp

But it still does the beep sound before resetting temp like it would shut down on battery and instead it just resets temp like it's just been turned on.
 
JustAnotherToker,

Blueberryyumyum

Well-Known Member
After i purchased this solo vaporizer and using it for about 3 weeks now.. Gotta say it taste really great.
But the hits are becoming so dry it really irritates my throat. So i decided to buy a bubbler to use with my solo any advice is welcome i live in europe so we don't have alot of american glass here. I really don't have any experience in buying this sort of glass so if somebody could help me out here.

http://fuckcombustion.com/threads/arizer-solo-water-filtration.11664/

Scroll down the page and let me know what you think about my considerations or if you know a better piece in my price range that matches with the solo.
 

olivianewtonjohn

Well-Known Member
After i purchased this solo vaporizer and using it for about 3 weeks now.. Gotta say it taste really great.
But the hits are becoming so dry it really irritates my throat. So i decided to buy a bubbler to use with my solo any advice is welcome i live in europe so we don't have alot of american glass here. I really don't have any experience in buying this sort of glass so if somebody could help me out here.

http://fuckcombustion.com/threads/arizer-solo-water-filtration.11664/
I dont have alot of experience but I can say this. I had a 12" reverse shower head pipe and I enjoyed it; but for me personally when I bought the pinnacle WT (very small if you havent seen it) I noticed how the hit felt just as smooth as the bigger pipe but kept alot more flavor and had less resistance.

So based on my experience I would recommend something small with alittle bit of diffusion (to keep the flavor and have less resistance).

EDIT: I like all of the small pieces you are considering other than the tree bubbler. I think you would be fine with any of them
 

Erikim

Well-Known Member
Anyone notice a much tighter airflow with an oring installed. I almost feel like the hits are not as dense maybe because lack of airflow
 
Erikim,

Hoof Hearted

Vapesallday Industries
You're probably using it with a stock stem.??

I don't like that combo (stock stem + o-ring)

Either remove the o-ring or buy you a PVHES

I'm hitting my Solo straight from a PVHEGonG right now on level 5 and blowing huge clouds

I also have an o-ring installed

HEGonG (or HE stem) + o-ring = :tup::tup:
 

clouded vision

Well-Known Member
Anyone notice a much tighter airflow with an oring installed. I almost feel like the hits are not as dense maybe because lack of airflow
lower airflow should actually give you denser hits. the faster you pull air over the heater, the less time it has to heat up and the more likely you are to overpower the heater and reduce the temperature of the heater. Are you trying to "suck" to overcome the restriction? This can cause you to come up for air sooner because your lungs get tired so the hits seem less dense. If you slow your draw to match the natural restriction you should be able to pull huge clouds
 
Last edited:

Erikim

Well-Known Member
I was trying it out with stock stems. I do have a pvhe gong and will prob use the oring just for that. Thought it was in my head, but I def get bigger hits on the stock stem without the oring.
 

Caligula

Maximus
Meh every model has some units with defects. Fact of life. If the seller is legit and says it works the same as new, then id just be concerned about the condition of the battery. Worst case you may need to pick up a new battery pack.

A 18 months is long enough for someone to nuke a battery.
 
Caligula,

vapor33

Well-Known Member
Has anyone bought one of eBay. I noticed that they are way cheaper. Just wanted to make sure they are legit before I take the plunge. It says he gets them from the company and he has good feedback, just wanted to double check. Strange that they are so much cheaper on eBay.
 
vapor33,

ataxian

PALE BLUE DOT
I'm hitting my Solo straight from a PVHEGonG right now on level 5 and blowing huge clouds

I also have an o-ring installed

HEGonG (or HE stem) + o-ring = :tup::tup:

I am sporting a PHVES STEM with the seal and I say this is what I'm doing very often.

Level 4 is all I can handle.
Level 5 must be incredible!
 

Lusi

Well-Known Member
buddies image of his super black weed says to me it DID combust. especially when looking at the stem colour. if you've ever put a flame through the thing, smoke turns it that dark color.


http://en.wikipedia.org/wiki/Charcoal
Well it doesn't look like charcoal, but the smell and taste of burned weed obvious. There might have Been a flame.... the smoke was coming out of the stem visibly. Vapors pretty much stay in there until sucked out. Then my stem is dark brown now too like the glass of a fireplace... burnt. The stem in my photo is less lessan a week in use.

I haven't Been able to recreate the experience even when purposely hitting some nasty dry brown shake up at 7 several sessions in a row. It didn't smell or taste good, but was far from torched!

I don't know how my solo did this or if there was a flame in the chamber that went out when I pulled the stem out. It was very hot! I'm still concerned it might again while I'm not paYing attention....
Check what OF suggested in post #21447 concerning the size and material for the o-ring... :)

I am internet clueless! I searched avpost called called 21447 by OF and got noththing. Do you have a link? The o-ring discussion is a huge spawling monster! I had planned to order one from pv with mh olo... just in case I needed it, but they are out. Turns out they would havee been useful!

Is there a place that sells wood stems and rings? :)
Ty
 

Pipes

Addicted DIY Enthusiast
Accessory Maker
For you guys that need a stand for your 14mm stuff. Here is a makeshift ghetto stand.
Have been going to post for a while but had to wait until I caught one which was used up.
I tend to get into trouble trashing stuff around here....:rolleyes:

P1060076_zps82dc1a68.jpg


Just cut off the thinner tip and the rest is the perfect angle for the connection. Can cut down another 1/2 inch or so if you like less clearance at the bottom. Could loose some of the outer base as well if inclined.
Works very well.

;)
 

OF

Well-Known Member
I am internet clueless! I searched avpost called called 21447 by OF and got noththing. Do you have a link? The o-ring discussion is a huge spawling monster! I had planned to order one from pv with mh olo... just in case I needed it, but they are out. Turns out they would havee been useful!

So you got the info? Dash number 113 high temperature Silicone rings are the call. They seem to all be red??? I get mine from McMaster Carr 100 at a shot.

Are you in the US? If so, and you PM me your name and address, I'll send you a couple.....but don't expect anything else for Christmas from me.....I noticed you didn't send me a Christmas card last year. Again.

Regards,

OF
 

jasong

Well-Known Member
Ok I just ordered my solo from vapornation and I wanted to know what you guys think I should buy extra to make my vaping better. Any help will be greatly appreciated thanks again
 
jasong,

Hexi

Well-Known Member
Ok I just ordered my solo from vapornation and I wanted to know what you guys think I should buy extra to make my vaping better. Any help will be greatly appreciated thanks again

Depends on what you like, what you have, what you want to do.

Check back to pgs. 700-800ish. Some sip on Stems. Others chase clouds with GONGs. I love chasing clouds, but I also realize that the Solo has limits and manage expectations accordingly (I can get some good clouds, but at a sacrifice)
 

jasong

Well-Known Member
Well that was my plan but I know a lot of the people here have great info on this vape the only thing that I think I want is a little bubbler that I can connect easily
 
jasong,
Top Bottom