• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

concentrate tools

mvapes

Scratchin' Glass!
Accessory Maker
It's the shit! This one is custom made by a buddy of a buddy, this one is a self calibrating prototype.

And for sticky stuff I use this. Not the top (pointy)but the bottom. Scoop up the sticky and place the bottom rounded part onto your nail and the heat will go right through the tool and evap the sticky icky.
 
Last edited by a moderator:

vape4health

Well-Known Member
Its not really that bulky or clumsy. Comparable in size to my cosmic whatever dabber i got from vitolo. The good thing about these is that they dont stick to the tool. So as long as you get the oil you want on there all you need to do is touch it to something it will stick to like the coil or rod in the hercules. No heat needed and no leftovers on the tool. If your not careful or delicate it will get on the sides and become quite messy.
Thats the nogoo tool posted that your talking about working for the SR71? Glad to hear it works and fits in the chamber.
 
vape4health,

tedthehed

Member
eh, any pointing awl type tool will do, just dangle your snot glob from the very tippy pin like tip, and anything it touches will pull it off...
in my experience..
 
tedthehed,

tedthehed

Member
you may have the wrong forum unless your looking to be branded via highly educated.

? " branded via highly educated ".....what? Cowboys speaking English as a second language?

Shall I remind you of the NAME OF THIS WEBSITE??? :)
 
tedthehed,

mvapes

Scratchin' Glass!
Accessory Maker
Maybe the Parkinsons is messing with me or maybe I'm just stoned but I am having trouble understanding you.

I post a picture od an 800° electric nail to which you asked where would the penis go?

Admittedly, the question was at first funny but quickly became a concern that someone may actually enjoy the sensation of such a hot piece of titanium on their junk. But hey, who am I to ask? I've seen worse.

Maybe someone should actually design a penis shaped stand for that very hot nail. In fact you could be the mold donor.

I would be but the fact is I'm a Jew and come on, I'm sure you've heard about the curse.

Anyway, if there's anything else I can help guide you with please feel free to reach out.

Oh, and by the way - welcome to fc, feel free to join any of my threads.

Just make sure you sanitize before coming in, some of us are sick for fuck sake.
 

tedthehed

Member
now were both confused.

when you talk about a penis shaped stand to burn ones 'junk' as you call it, on a 800F nail, do you mean the nail is
INSIDE the mold so it is actually penetrates the urethra ? Or is the hot nail sitting proudly astride the top of the 'stand' ready for insertion in to some other, willing, orifice?
The curse? you mean the one where you're chosen? well? Batter up, man, I can only see the circumcision being an advantage in this situation..
btw I experienced Parkinsonism through the miracle of modern meds by way of allergic reaction...no fun, no fun at all..
 
tedthehed,

mvapes

Scratchin' Glass!
Accessory Maker
You may either be my father or someone I never thought I'd talk to again.
 
mvapes,

mvapes

Scratchin' Glass!
Accessory Maker
I'm looking to get another ball tip dabber. Anyone try the Santa Cruz dab tools?

I have their shredder and it's dope but have never tried anything else.
 

Patrick Hughes

Stoneman

BLAZING OG

Vaping is a way of life!
These are cool too:
HAPPY DADDY KATANA DABBER GRADE 2 TITANIUM | Chief Cottonmouth
HAPPY DADDY K BAR DABBING KNIFE GRADE 2 TITANIUM | Chief Cottonmouth
those are pricey but I love all the happy daddy dabbers. They are handmade with hammers and shit, and they look like it. The more regular style dabbers are very reasonable if you buy direct:
https://happydaddyproducts.net/product-listing/product/listing
Thats too funny ,you beat me to it!!!
I actually own a happy daddy titanium dabber , all hand made and all like you said. I love it , got it at the Beyond Boro (OIL CUP) here in Cali.
:rockon::clap::nod:
Good Shit.
I have the baby buddah, works great, has a a little spoon like end to get those finicky crumbles that are real dry and dont stick well.

http://www.instavillage.com/p/603299920437472261_55073226/

http://www.instavillage.com/u/skywalkerwraps/
 
Last edited:
BLAZING OG,
  • Like
Reactions: mvapes
I've been rockin' one of these for 4+ months or so.
http://santacruzshredder.com/product/cookie-cutter/
They are spendy, but the cookie cutter end works really(!) well hard to stick stuff. I guess it's a different take on a scoop.
One really big difference is the cup sort of feeds it over 2-3 seconds as opposed to everything going on the nail at once. This sort of allows you to "pull out" if you went too big, or early (hot). It's a nice feature, but not for everyone. It's especially nice for beginners to be able to pull out, but by then, for them it's usually too late.

Another nice feature, that is subtle but important, is the shaft is a triangle with the tips flattened. The triangle keeps it from rolling, and the flattened tips complete a really nice overall feel to it, feels nice in the hand.

Edit: those swords are awesome!
 
Last edited:

Caligula

Maximus
get your Teflon coated tools here!

check out the "burnisher" for a quarter inch tip, or this for a needle-like awl tool:


http://www.bonefolder.com/category_s/1850.htm

Just got around to ordering a set of these teflon wax sculpting tools as well as a pair of teflon coated tweezers. Ill update with a review when I get them.

I should also note that these are NOT for dabbing. According to DuPont, Teflon coatings start to break down at 500°F and starts to burn/off-gas at about 650°F.

I dont really care seeing as how I dont even own a nail. I just want tools to handle my concentrates with and to help load my Sr71 and KISS carts. Hopefully it will work as I imagine unlike that Nogoo tool.
 
Last edited by a moderator:

MileHighLife

Blower of glass, grower of grass
Just got around to ordering a set of these teflon wax sculpting tools as well as a pair of teflon coated tweezers. Ill update with a review when I get them.
I should also note that these are NOT for dabbing. According to DuPont, Teflon coatings start to break down at 500°F and starts to burn/off-gas at about 650°F.

I dont really care seeing as how I dont even own a nail. I just want tools to handle my concentrates with and to help load my Sr71 and KISS carts. Hopefully it will work as I imagine unlike that Nogoo tool.

The nogoo tool works great for what it is but it is a bit bulky for the herc.

I'm interested to see how those work out.
 
MileHighLife,
  • Like
Reactions: Caligula

Caligula

Maximus
I have the Nogoo tool.

The silicone on the scoop side split open pretty shortly after getting it (looking at amazon reviews and this seems to happen a lot) making that side useless. The blunt side is intact but isnt good for getting stuff out of my containers or off the silicone mat. Plus concentrates seem to stick tothe silicone on the tool pretty readily. It's really odd since the same stuff doesnt stick to my Oilslick pad or my Slickball containers... not really all that great considering the silicone covers on the ends pull off quite easily.

Only use I've found for it is pushing little chunks of shatter down onto the Hercules oil coil if it gets stuck on the chamber wall on the way down.

Meh.
 
Caligula,

MileHighLife

Blower of glass, grower of grass
I have the Nogoo tool.

The silicone on the scoop side split open pretty shortly after getting it (looking at amazon reviews and this seems to happen a lot) making that side useless. The blunt side is intact but isnt good for getting stuff out of my containers or off the silicone mat. Plus concentrates seem to stick tothe silicone on the tool pretty readily. It's really odd since the same stuff doesnt stick to my Oilslick pad or my Slickball containers... not really all that great considering the silicone covers on the ends pull off quite easily.

Only use I've found for it is pushing little chunks of shatter down onto the Hercules oil coil if it gets stuck on the chamber wall on the way down.

Meh.

Did you see the review where the guy took a dab off a nogoo tool? He says it tasted bad lol

I have had my tool for a few months now and use it after scraping my pyrex on bho runs to get the oil off my scraping tool. I'm pretty brutal with it and have seen no wear and tear yet but I use the blunt side for the most part. If it does break I'll probably replace it will some Teflon coated tools ... they look like they could be a perfect fit.
 
MileHighLife,
  • Like
Reactions: Caligula

ataxian

PALE BLUE DOT
It's the shit! This one is custom made by a buddy of a buddy, this one is a self calibrating prototype.

And for sticky stuff I use this. Not the top (pointy)but the bottom. Scoop up the sticky and place the bottom rounded part onto your nail and the heat will go right through the tool and evap the sticky icky.
The guy at the hydro store said that anything that requires a battery is lame.
He say's that DABBING is his daily method.
Cheap and powerful.

I wonder sometimes do we make it more complicated than it needs to be?
His wax was blonde and honeycomb crumbled!
 

MileHighLife

Blower of glass, grower of grass
The guy at the hydro store said that anything that requires a battery is lame.
He say's that DABBING is his daily method.
Cheap and powerful.

I wonder sometimes do we make it more complicated than it needs to be?
His wax was blonde and honeycomb crumbled!
Did you show him a picture of your persei/battery box after that? :lol: :o
 
MileHighLife,
  • Like
Reactions: aesthyrian
Top Bottom