The Beast Mod Box (6 Amp Switch)

[BLAZING OG]

Interesting Box Mod Box with a 6 amp switch and 2 26500 stacked cells.
Interesting device with major power, a few adapters and you can run almost anything, equiped with variable voltage.

http://www.mister-e-liquid.com/the-beast-box-vv/

This Beast Box VV Info:

- Variable voltage chip manufactured in the USA (most competitors are using Chinese manufactured chips which experience short life)

- Potentiometer manufactured in Japan (most competitors are using Chinese manufactured pots which experience short life with inconsistent results)

- Continuous Short Circuit Protection

- Overcurrent Protection

- Overload Protection

- Overheat protection

- 6 amp limit (safe for dual coil cartomizers)

- 2 26500 3000mah batteries required

- WF-188 battery charger required

- Variable Voltage from 2.9V - 8.4V

- 510 Connection

- Drip Cup (if you use carto tanks ask for your box with no drip cup. Drip cup will work with some drip shields)

- On/Off Master Switch

- Super Clicky Tactile Activation Switch (rated for 1 Million presses)

- LED mounted outside the Beast Box, for a very bright, find your way in the dark, type of light. (or select no LED for super stealthy

- Self Leveling Epoxy sealing the Circuitry, leaving a sleek polished finish. (Not cheap, messy looking hot glue like many of our competitors, no liquid will touch the circuitry)

- The Beast Box VV is safe to use 1.5 ohm (low resistance atomizers/cartomizer)

- There will be a 3-7 day Lead Time with these units.

- Other items in your order might ship separately from these units, due to the lead time.

 

[Darb]

Not available right now. No battery stock. I'm going to order one of these. Are you using one?

 

[BLAZING OG]

Not available right now. No battery stock. I'm going to order one of these. Are you using one?

No not yet, but Iam planning on it as soon as I can find batteries or the site gets them before I find them.
I just noticed the non availability due to batteries, Iam going to email them and see if I can order just the box if I find the batteries else where.

The price is awesome for this beast, the ecig guys tend to thing its a tiny bit pricey, but for the medical marijuana community this is a steal considering MMj products get 200-300% mark-up at times.

 

[Cheerful Dub]

At that price I can't really expect much more, but I personally don't like variable devices with manual screw adjustment and without a display.

 

[jdee]

cheap plastic boxes are fun, why not just spend the $20 it costs in parts and use one of the many handy guides available online ( like the one found here http://www.howder.com/dena_howto.pdf ) to DIY?

 

[BLAZING OG]

cheap plastic boxes are fun, why not just spend the $20 it costs in parts and use one of the many handy guides available online ( like the one found here http://www.howder.com/dena_howto.pdf ) to DIY?

Thats always the funnest way @jdee, I completely agree.
Just in case some people arent technically inclined to build one them selves, the beast would for sure take care of that lol.

Great find.
Gonna study that up.

RDA, Rebuildable dripping atomizers are becoming the hot thing for waxes and oils, you build the coils for dirt cheap and its the same thing all these companies are doing except there using inferior materials.
You can rebuild your wax atomizer 15 times before it cost you the same price of one cartridge or atomizers from these Ecig/MMj pens.

Building your own coils will eliminate buying these overly marked up china carts and atomizers that people claim are not the same ecig attys. cartos, ect, ect.

At that price I can't really expect much more, but I personally don't like variable devices with manual screw adjustment and without a display.

This one has a small dial to adjust VV, but it also has a screw dial in the center.
I agree, all i would need now is a oled or lcd screen on this bad boy.

I like the fact it uses 26500 batteries, that would last me probably a week or more with out charging (maybe more).

Also they suggest to adjust VV to your liking by going on taste, if it hits hard and still taste good you found your sweet spot.

 

[jdee]

RDA, Rebuildable dripping atomizers are becoming the hot thing for waxes and oils, you build the coils for dirt cheap and its the same thing all these companies are doing except there using inferior materials.
You can rebuild your wax atomizer 15 times before it cost you the same price of one cartridge or atomizers from these Ecig/MMj pens.

Building your own coils will eliminate buying these overly marked up china carts and atomizers that people claim are not the same ecig attys. cartos, ect, ect.

This is exactly what I've been doing, and it works great. I made a solid core 'waffle cone' out of stainless steel mesh and my waffle cone holder is a vertical microcoil. I just pulse the coil to warm the cone and load it up with dabs and vape away.

 

[Darb]

This is exactly what I've been doing, and it works great. I made a solid core 'waffle cone' out of stainless steel mesh and my waffle cone holder is a vertical microcoil. I just pulse the coil to warm the cone and load it up with dabs and vape away.

Any pics?

 

[jdee]

Any pics?

if it looks like there is a puddle of reclaim right under the coil, it's not, just a weird reflection in the picture. all the oil stays in the cone and doesnt fall out, holds at least 3 dabs worth, I prefer load as you go for the cleaner taste. whatever little reclaim does build up is super easy to scap and throw back into the cone.

 

[BLAZING OG]

if it looks like there is a puddle of reclaim right under the coil, it's not, just a weird reflection in the picture. all the oil stays in the cone and doesnt fall out, holds at least 3 dabs worth, I prefer load as you go for the cleaner taste. whatever little reclaim does build up is super easy to scap and throw back into the cone.

Thanks brother, You havegreat infor here.
a DIY guide would be freaking amazing to show how to make this wick.

 

[Quetzalcoatl]

@BLAZING OG http://fuckcombustion.com/threads/diy-pen-vape.10608/#post-468695

edit: nevermind I scrolled down and you already saw it hahaha fuck

 

[BLAZING OG]

="Quetzalcoatl, post: 469314, member: 8280"]@BLAZING OG http://fuckcombustion.com/threads/diy-pen-vape.10608/#post-468695

edit: nevermind I scrolled down and you already saw it hahaha fuck[/quote]
hahaha no worries, either way thank you for the heads up.

vape on brotha!

 

[BLAZING OG]

http://www.e-cigarette-forum.com/fo...k-smokbox-varicool-6amp-usa-mod-review-3.html

this looks interesting to

LOL cheesy video

it uses stacked batteries but not actually stacked there side by side, and it steps down the voltage so you get regulated power all the way down, pretty nifty(Switching regulator).

 

[gabriellabuttons]

Hey there. I'm new to the forum deal so Hi!! Anyways, I may have to give this one a try...but, it look complicated. Maybe it's just me?? Right now I'm on the blaze twin oil vapor. Its a pen vaporizer but it rips like nothing i have used from a pen vaporizer. And it was only may 95 bucks and I got two in the box. But, I'm always on the lookout for the latest ish. Do you find that pens are weaker than the standard portables?

Thanks!!

 

[BLAZING OG]

if the pens work good then there a winner,, I love my micro pen it's so discreet, you can beat that.
T he cartridges foul up very fast, rebuilding your own is not hard just looks it.
most of these companies do this when they build there carts and then charge you 30 bucks for them, you can rebuild yours 100 times for this money.
certain atomizer seem to hit harder than others ,but they all do so about the same.

 

[BLAZING OG]

Hey there. I'm new to the forum deal so Hi!! Anyways, I may have to give this one a try...but, it look complicated. Maybe it's just me?? Right now I'm on the blaze twin oil vapor. Its a pen vaporizer but it rips like nothing i have used from a pen vaporizer. And it was only may 95 bucks and I got two in the box. But, I'm always on the lookout for the latest ish. Do you find that pens are weaker than the standard portables?

Thanks!!

there are a few exceptions of pen vapes that hut hard, I hear vb dabbler and Dr dabber are hard hitters, thermo essence cera oil vape hits hard, persei Hercules when working and loaded right vapes hard.

 

[asimplebeast]

I just ordered one of these as an alternative to my Persei to run the SR-71. I'm excited to get into the world of RBA's using it as a base too. Thanks for the inspiration.

 

[BLAZING OG]

Fucking awesome dude!!!!!

I just ordered one of these as an alternative to my Persei to run the SR-71. I'm excited to get into the world of RBA's using it as a base too. Thanks for the inspiration.

Thats what I was hoping to inspire people to DIY and build there own wax cookers and to use a bad as ecig device thats so powerful it can run most attachments on the market.
You cant loose for the price.

Just got my mechanical mod, and aim looking to get the beast next.

but I just found this , and they offer a unit with 6amp or 10 amp limit , wowowowowowowow.

Heres the best kept secret, Id like to share this with all my FC Friends.

http://custom-xmods.blogspot.com/search/label/Phiniac Custom Mods

enjoy!!!








http://custom-xmods.blogspot.com/search/label/Sold Mods Gallery

 

[asimplebeast]

Fucking awesome dude!!!!!


Thats what I was hoping to inspire people to DIY and build there own wax cookers and to use a bad as ecig device thats so powerful it can run most attachments on the market.
You cant loose for the price.

Just got my mechanical mod, and aim looking to get the beast next.

but I just found this , and they offer a unit with 6amp or 10 amp limit , wowowowowowowow.

Heres the best kept secret, Id like to share this with all my FC Friends.

http://custom-xmods.blogspot.com/search/label/Phiniac Custom Mods

enjoy!!!

http://custom-xmods.blogspot.com/search/label/Sold Mods Gallery

Those look awesome, but they don't put out more than 6v so they wouldn't work for something like the SR-71(?) Seems like a steal though, I like that they use 18650's, that gives you lots of battery options.

 

[BLAZING OG]

Edited, sorry was typing on a smart phone earlier.

Those look awesome, but they don't put out more than 6v so they wouldn't work for something like the SR-71(?) Seems like a steal though, I like that they use 18650's, that gives you lots of battery options.

Yes, Iam going to ask if he has a 6 to 7 amp switch, it has a 5amp limit in the chip but I think I'll go with the 10amp limit chip, but need a higher rated switch.

http://www.ohmslawcalculator.com/ohms_law_calculator.php
I might be wrong or doing it incorrectly but its showing 7.4v @ 1.6 ohms (My herc reads @1.7ohms) equaling 4.6 amps 34.225 watts.
Persei tops handle 5 amps 35 watts max ( I believe).
So yeah it has to be able to push out the 7.4v, but with the iris the herc has worked for me at 6v's, It might be possible your right a bit under powered.
This is great to have so many people that know and understand these devices to get the right info on what might and might not work, saves us all a headache lol lol.

Thanks for the info, going to keep looking !!!!

 

[clukx]

Persei alternative?! How many hits can you get off one load with straight bho no pg/vg or anything

 

[BLAZING OG]

Persei alternative?! How many hits can you get off one load with straight bho no pg/vg or anything

It could be possible and for the Thermo essence loose leaf and the Essential oil carts, the persei has an attachment that would require 7.4v and most devices might only have a certain limit.
With some of these you can probably run most attachments and save some bucks, plus if your into ecigs you can have one device for it all with variable voltage.

This is more for the battery unit that would power what ever cartridge you have or use, if its a load as you go were you load small dabs at a time depending on the cartridge I can get 3-5 fat as hits, if its a cera oil cart I can get 3-4 fat ass hits from a dab or load a .5 and have it going strong for the whole day, 15-20 hits maybe more, the hercules attachment when working can vape thru a .5 in a few massive its , or you can throttle the button and make it stretch a bit.
I think the herc being the more oil hungry device, not as conservative.

 

[jdee]

Heres the best kept secret, Id like to share this with all my FC Friends.

http://custom-xmods.blogspot.com/search/label/Phiniac Custom Mods

That site you linked is DZs old site, he makes nice DNA20 boxmods, probably my favorite in terms of price/performance/quality of materials used. Anyone looking to to pick one up can do so from here http://jcmsvapes.com/APV-Mods/DNA20-Mods/DZ-D20S

or if you wanna be crazy and build it yourself, these are the enclosures he starts the boxes with http://www.mammothelectronics.com/4S125B-p/500-1002.htm and here is the DNA20 board http://www.thehouseofvapor.com/product_p/1384.htm

 

[BLAZING OG]

That site you linked is DZs old site, he makes nice DNA20 boxmods, probably my favorite in terms of price/performance/quality of materials used. Anyone looking to to pick one up can do so from here http://jcmsvapes.com/APV-Mods/DNA20-Mods/DZ-D20S

or if you wanna be crazy and build it yourself, these are the enclosures he starts the boxes with http://www.mammothelectronics.com/4S125B-p/500-1002.htm and here is the DNA20 board http://www.thehouseofvapor.com/product_p/1384.htm

WOW dude, Thanks.
Thats great to know, I was wondering why I havent got a response.

 

[BLAZING OG]

This Beast Box VV Info:

- Variable voltage chip manufactured in the USA (most competitors are using Chinese manufactured chips which experience short life)

- Potentiometer manufactured in Japan (most competitors are using Chinese manufactured pots which experience short life with inconsistent results)

- Continuous Short Circuit Protection

- Overcurrent Protection

- Overload Protection

- Overheat protection

- 6 amp limit (safe for dual coil cartomizers)

- 2 26500 3000mah batteries required

- WF-188 battery charger required

- Variable Voltage from 2.9V - 8.4V

- 510 Connection

- Drip Cup (if you use carto tanks ask for your box with no drip cup. Drip cup will work with some drip shields)

- On/Off Master Switch

- Super Clicky Tactile Activation Switch (rated for 1 Million presses)

- LED mounted outside the Beast Box, for a very bright, find your way in the dark, type of light. (or select no LED for super stealthy

- Self Leveling Epoxy sealing the Circuitry, leaving a sleek polished finish. (Not cheap, messy looking hot glue like many of our competitors, no liquid will touch the circuitry)

- The Beast Box VV is safe to use 1.5 ohm (low resistance atomizers/cartomizer)

- There will be a 3-7 day Lead Time with these units.

- Other items in your order might ship separately from these units, due to the lead time.

Maybe Iam wrong but the beast so far is the only mod box that can handle 7.4 actually just noticed it says 2.9 to 8.4 (fully charged batteries).
This shy of a oled or lcd screen is the way to go for the hercules attachment.
6 amp limit and can raised to batteries max voltage (stacked).