Discontinued VapeXhale Cloud

Anonymouse

Anonymouse

Sith I care
MonsterWithoutBorders said:
Wouldn't it be pretty stressful on the glass.
Click to expand...

Shouldn't be, unless the expansion of the freezing water manages to push stuff apart or something. Differential thermal expansion of the glass is not an issue as boro has a very low coefficient of expansion, plus we're only talking about a delta-t of like like 80C, tops.

If you add a small enough amount of dry ice it won't freeze the water, but the pieces will quickly form a skin of water ice after which they'll sublime much more slowly. You could probably get a few super-cold hits in but the gas taste would make it not terribly pleasant. You wouldn't be at any risk, though. You could also leave the water out altogether and just use dry ice pieces on their own. They'd still cover themselves in water ice, though, but by stripping water vapour out of the incoming air, so while the hit would be cold as fuck, it'd also be completely dry. And kinda fizzy-tasting. :/

However, it was a joke suggestion. As awesome as a magical, continuously self-milking bong would be, don't actually try this; it is in no way practical. :p

Well, unless you're at a party or something and there just happens to be a cooler full of dry ice and a bong somewhere. Then totally try it. And make a video for us.
 
Last edited:
H

hookedonvape

Active Member
if you go to steve bates you tube channel theres a little better video of the tubes. looks as if the fanatic has circ ti dual turbines. green on the tube, im guessing thats it. confusing thing is he says limited edition on one that has a colored mouthpiece and single yurbine. either way im sure youll get the bang for your buck

i would love yo see a pillar made , should be a easy job.lol. any blowers out there up for a challenge?

mod note: Use Edit in order to avoid back to back posts please.
 
Last edited by a moderator:
Anonymouse

Anonymouse

Sith I care
hookedonvape said:
if you go to steve bates you tube channel theres a little better video of the tubes. looks as if the fanatic has circ ti dual turbines. green on the tube, im guessing thats it. confusing thing is he says limited edition on one that has a colored mouthpiece and single yurbine. either way im sure youll get the bang for your buck
Click to expand...

Link please? I can't find it.
 
H

hookedonvape

Active Member
october really cant come soon enough. my cloud+ has rbs, random blinking syndrome:rockon::( remedied by resetd

just search steve bates on you tube, im at work cant quite put up a link on my phone here
 
Last edited by a moderator:
hookedonvape,
Seek

Seek

Apprentice Daydreamer
I think by now I have a good picture of what is happening to the bowl with slow/hard pulls. This led me to try a technique that should be most powerful for the Cloud. And it seems to work, I've managed to vape 2/3 bowl in one hit on noon.

When pulled slowly, the heat get absorbed in lower levels until they're vaped and even then some. This will do the layer-by-layer extraction. And each layer will have very slight temp decrese it you don't stir or pull hard at all.
Large loads need at least one stir or hard pull to get really evenly finished from top to bottom.

When pulled hard, the bowl get huge temp hit from bottom to top. Air is going through bowl so fast it doesn't have time to cool down much in it. Pulling hard, you are basically vaping the whole bowl at once.

If the herb is being vaped it is it's own state - it's temp. And acording to that it is slowly fuming off the actives. Slowing the airflow while keeping the temp will increase density.
So the technique is an overall slow pull with numerous hard surges. These surges will heat up the whole bowl to be fuming at full capacity and then slow pulling that keeps the whole bowl at temp for a while when preheated while getting vapor in highest possible density. When the vapor production starts dropping down, pull hard briefly again to get it supercharged again. When it stops giving at both slow and hard pull, it's done.
 
Anonymouse

Anonymouse

Sith I care
11eleven11 said:
Maybe he's talking about the instagram videos.
Click to expand...

Hrm. His description does sound like the Instagram ones we've already seen. But those vids were direct from the Swagger factory and nothing to do with Steve Bates, plus he clearly wrote Youtube both messages. I guess we'll have to wait for the link to find out.
 
Enchantre

Enchantre

Oil Painter
Anonymouse said:
Shouldn't be, unless the expansion of the freezing water manages to push stuff apart or something. Differential thermal expansion of the glass is not an issue as boro has a very low coefficient of expansion, plus we're only talking about a delta-t of like like 80C, tops.

If you add a small enough amount of dry ice it won't freeze the water, but the pieces will quickly form a skin of water ice after which they'll sublime much more slowly. You could probably get a few super-cold hits in but the gas taste would make it not terribly pleasant. You wouldn't be at any risk, though. You could also leave the water out altogether and just use dry ice pieces on their own. They'd still cover themselves in water ice, though, but by stripping water vapour out of the incoming air, so while the hit would be cold as fuck, it'd also be completely dry. And kinda fizzy-tasting. :/

However, it was a joke suggestion. As awesome as a magical, continuously self-milking bong would be, don't actually try this; it is in no way practical. :p

Well, unless you're at a party or something and there just happens to be a cooler full of dry ice and a bong somewhere. Then totally try it. And make a video for us.
Click to expand...
Leonard? Sheldon? Is that one of you?

:bowdown:
 
SD_haze

SD_haze

Well-Known Member
Seek said:
I think by now I have a good picture of what is happening to the bowl with slow/hard pulls. This led me to try a technique that should be most powerful for the Cloud. And it seems to work, I've managed to vape 2/3 bowl in one hit on noon.

When pulled slowly, the heat get absorbed in lower levels until they're vaped and even then some. This will do the layer-by-layer extraction. And each layer will have very slight temp decrese it you don't stir or pull hard at all.
Large loads need at least one stir or hard pull to get really evenly finished from top to bottom.

When pulled hard, the bowl get huge temp hit from bottom to top. Air is going through bowl so fast it doesn't have time to cool down much in it. Pulling hard, you are basically vaping the whole bowl at once.

If the herb is being vaped it is it's own state - it's temp. And acording to that it is slowly fuming off the actives. Slowing the airflow while keeping the temp will increase density.
So the technique is an overall slow pull with numerous hard surges. These surges will heat up the whole bowl to be fuming at full capacity and then slow pulling that keeps the whole bowl at temp for a while when preheated while getting vapor in highest possible density. When the vapor production starts dropping down, pull hard briefly again to get it supercharged again. When it stops giving at both slow and hard pull, it's done.
Click to expand...
I have made very similar observations regarding VXC use!
 
oldiebutgoodie

oldiebutgoodie

Apostle, Church of Vaporization
Ice said:
Where are all my fellow Fanatics?

I haven't got my email yet, though I think I will choose the green and straight neck with ice pinches.
Click to expand...

We're here, had you thought we'd left? And those were my choices as well.

About the shirts, I'm also a medium or large depending on how its cut. But another factor to remember is shrinkage - that which is common and that which is user error (aka tossing into a hot dryer). I'm going for the large. With my physique, it won't do for me to look like I've been shrink-wrapped. Better to have room to move around in it.
 
oldiebutgoodie,
  • Like
Reactions: JoeKickass
H

hookedonvape

Active Member
i think it was the instagram. had two vids, one with the green work and one with a thin black tipped mouthpiece and had opals and a double turbine. tdub did you get a custom mouthpiece on your inline? im just wondering if this syraight neck is gonna be balls out wide and thick.
 
hookedonvape,
t-dub

t-dub

Vapor Sloth
hookedonvape said:
tdub did you get a custom mouthpiece on your inline?
Click to expand...
The whole piece is custom by SSFG, I won it from @stonemonkey55 :), it has a "Cobra" style mouthpiece on it which I don't think we will be seeing on this project. Here is a pic though . . .

inline3.jpg

---
inline6.jpg
 
U

Undeadhelghast

Member
I hope that I get the black one with the bent neck. I tried to pm troi, but am not sure if I did it correctly. I've been having trouble getting into my email, and I heard about the cutoff deadlines, so fingers crossed. Anywho, my girlfriend and I have been cloudless for a while. Ever since she accidentally broke the bamboo. We've been running off of enanos since, but have been dearly missing the perfect flavor achieved with the cloud. Also the e-nano is good for toasting bud nice and brown real quick, but I find that I cannot get a nice even low temp session like, I personally, preferred.If the Evo performs exactly like our old ticker but with a faster heat up time and longer auto timer, then... Well that'll just be swell :smug:
 
You must log in or register to reply here.
Top Bottom