• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Ascent Vaporizer - The Ordering, Shipping, & Other Nonsense thread

Are you going to definitely buy the Ascent as things stand now ?

  • Yes

    Votes: 37 26.6%
  • No

    Votes: 28 20.1%
  • Yes, and I want a pre-order from DV put in place

    Votes: 31 22.3%
  • Yes, and I DON'T want a pre-order from DV put in place

    Votes: 6 4.3%
  • Who cares !! Just wait for it and shut up !

    Votes: 37 26.6%

  • Total voters
    139
  • Poll closed .
Status
Not open for further replies.

Shrike

Flower Potted, Maxed, & Rio'd.
It has gotten exciting over there...the next few weeks should be a lot of fun!:)
 
Shrike,

Medical Mark

Well-Known Member
Well I don't know how reliable GV is but I called them today and the said the units were on there way to them as we speak and should be shipped out on June 21st , along with my 14mm straight adaptor.
So I hope its true and accurate information I have the email of the chat transcript so I hope there for real.
Medical mark
 
Medical Mark,

Dreamerr

Always in a state of confusion and silliness♀
LOL from DV to GV is oh a day at most...ok post office two days. So that tells you they have no idea cause the units haven't landed in the USA yet.
 
Dreamerr,

al bundy

Vaporist
It took me three + weeks to get my Pinnacle replaced by GV.
I wanted to send back Priority their label said UPS Ground
And the wait for the water tool ....I got the same"as we speak" qoute

Don't hold your breath.
 
al bundy,

Dreamerr

Always in a state of confusion and silliness♀
I wonder what happened to us getting a notice from DV and getting ours if we choose to before GV. I guess we are waiting since GV will have them shortly.
 
Dreamerr,

nigel

And shepherds we shall be,for Accuracy & Discovery
I wonder what happened to us getting a notice from DV and getting ours if we choose to before GV. I guess we are waiting since GV will have them shortly.

Had presumed that she shifted the thread as sales were about to start any second now. But Pak said that he shifted the thread because the review units were out and he wanted their official pronouncement in the final thread.

So, sales could still start as early as today, although, with the logistics of trying to serve people in the order they registered, I'd suspect early next week as the drop point.
 
nigel,

Nesta

Well-Known Member
Still no word on a hard release date?

:(
I called DaVinci a couple of days ago to find out where I was on the pre-registration list. They were vague when I asked about the release date, saying they were still working on some issues. When I said it sounded like it could be two more weeks -they agreed.
 
Nesta,

SleepyHead

Well-Known Member
I called DaVinci a couple of days ago to find out where I was on the pre-registration list. They were vague when I asked about the release date, saying they were still working on some issues. When I said it sounded like it could be two more weeks -they agreed.


Well if this is true, that is quite disappointing :ugh:
 
SleepyHead,

Mynameismud

Accessory Maker
Accessory Maker
Yup, I have been using something we call "butter" up here in Canada. I think this is what is referred to as "wax" in America..

Its wax or "budder" around me, some other names too. When you type "butter" people get confused and think your talking about actual butter

Well if this is true, that is quite disappointing :ugh:

Its not soo disappointing anymore, they already missed their expected release date by a month now. At least people actually have units to test out while the rest waits. Soon enough it will be out. I doubt people will be getting them in 2 weeks. Im thinking more like 3-4 weeks, plus that way ill get a nice surprise and be happy if it comes in 2
 
Mynameismud,

sam reynolds

because "Samantha" is a mouthful.
Its not soo disappointing anymore, they already missed their expected release date by a month now. At least people actually have units to test out while the rest waits. Soon enough it will be out. I doubt people will be getting them in 2 weeks. Im thinking more like 3-4 weeks, plus that way ill get a nice surprise and be happy if it comes in 2

Longer than that--original release was supposed to be 3/31. A lot of us have been waiting at least that long. I have to admit I'm losing hope and interest.

On the other hand, if the ascent had come out then, I never would have picked up my solo. Silver lining? :)
 
sam reynolds,
  • Like
Reactions: Krizzle

Mynameismud

Accessory Maker
Accessory Maker
Longer than that--original release was supposed to be 3/31. A lot of us have been waiting at least that long. I have to admit I'm losing hope and interest.

On the other hand, if the ascent had come out then, I never would have picked up my solo. Silver lining? :)
Oh ive only been paying attention since the May release date. Whoops.

And not really a silver lining, because if/when the ascent comes out and you get it you could be saying to yourself "damn im never going to use this solo again, what a waste of money!"
 
Mynameismud,

SleepyHead

Well-Known Member
I suppose in the scope of life, 2 weeks isn't that bad. It seems to be worth the wait anyways :)
 
SleepyHead,
  • Like
Reactions: OF

OF

Well-Known Member
I suppose in the scope of life, 2 weeks isn't that bad. It seems to be worth the wait anyways :)

And oh, so very traditional? I can't think of an example of a vape or accessory that came off 'on schedule'....and may of them with came with nearly immediate changes that should probably have been sorted out in Beta Testing and prior steps? Even while being late for the usual reasons.

Completed, well made designs and fastest time to market are a trade off at the best of times.

"Take all the time you need to do a good job".

OF
 

poonman

Well-Known Member
It always amazes me that the very ones selling a product know the least about it. that's why i read these forums and stay informed.

Plus we get updates from DV themselves .
They show up and answer questions .
My guess is , DV will be letting N.Americans know how to purchase one soooooooon .
 

Vaporito

Well-Known Member
Oh we'll so much for ordering by Father's Day.... In any case I just came back from running a 10k race all barefoot.... This is my 5th year in a row, and its the way I celebrate being a dad.... All by myself along with 500 runners.

Happy Father's Day to all the dads out there...
 

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
Oh we'll so much for ordering by Father's Day.... In any case I just came back from running a 10k race all barefoot.... This is my 5th year in a row, and its the way I celebrate being a dad.... All by myself along with 500 runners.

Happy Father's Day to all the dads out there...

Barefoot!!!!! Your a stud dude!
 
VaPeD&CoNfUsEd,
  • Like
Reactions: poonman

Vaporito

Well-Known Member
Yup. now I'm gonna sit back and enjoy a session with my Classic Davinci!

Barefootin', it's the way we were meant to be...
...........................
....oooO...............
.....(....).....Oooo...
......\..(......(....)......
.......\_)......)../.........
................(_/............
....................................
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Waiting for my Ascent! DG Micro Fritted!

Waiting for my Ascent! DG Micro Fritted!
Picture of bubbler didn't post. Will try again.

Picture of bubbler didn't post. Will try again.
Sorry...can't figure out how to post pics. Can someone guide me through it? Thanks!

Mod note: When possible, please avoid making back-to-back posts in a thread. Use the Edit feature located at the bottom of your posts. Three posts merged.
 
Snappo,

11eleven11

Well-Known Member
Sorry...can't figure out how to post pics. Can someone guide me through it? Thanks!


Here's what I would do.

1. go to www.imgur.com and upload the picture
2. copy the image link (should end with your file type, like .jpg or .png, etc.)
3. Post that link here wrapped in img tags --- [img*]your link[/img*] (remove the * in there, I just did it so it won't think I'm trying to post a pic)
 
11eleven11,

VaporsVaporizer

On the Stoop
You have to use an image hosting site like tinypic.com. Upload your photo and copy the image URL. Then click on Insert image but make sure you don't have the brackets in there -Just has to start with http
 
VaporsVaporizer,

OF

Well-Known Member
Actually, I tried to delete the post altogether by going to "Edit". Then I tried to delete the post by backspacing over it, but it didn't delete. Sorry, but I'm not very good at the science of posting.

Yup, that's the way it works.

When I do it (double post), I cut and paste the new stuff from the second to the first using edit. Then I edit the second to "duplicate, please delete" or similar then report myself (using the "Report" tab at the bottom") to alert the Mods (who are the only ones that can delete it).

That usually happens very quickly, if a Mod's on duty.

Screwing up doesn't make me popular, but I'm told that's the preferred technique?

OF
 
Status
Not open for further replies.
Top Bottom