Discontinued Indica Vaporizer

Slightly Medicated

(SliM) Iron Lungs
everything you put in it will fee like a sativa given the low temps!

Damn you beat me to it. I was writing this response earlier today but had to leave the house before I could finish writing it.

I was going to say with a temp range like that they should have called it the Sativa because you are going to get those low temp high. :(

Sadly I can tell from the get go this will not be a good option for me. I like the form factor allot. Always like the classic zippo style... I wonder if you could do zippo tricks with the Indica Vaporizer?

I am surprised everyone likes such a high temp. I never take my Q past 385. I think low on the pax is too low and medium is too high.
It is pretty much a requirement for me if I am going to use the device. Anything below around 400F makes the conditions I am trying to treat worse. Only at the higher temps do I get pain relief and enough sedative effect to stop my symptoms.
 

Belgianvapor

Well-Known Member
if this thing can deliver results like the pax I bet it will become a big competitor, I really like the small
form factor, something I've been waiting for since my dreams got crushed when the stealthvape became vaporware...
But...one big concern I have and that is how easy is it to clean this thing? with the pax you can go from
top to bottom in a straight line making cleaning pretty easy, here I can't see any other way to clean
the vapor path by bending pipe cleaners and try working behind the corner...altough I don't suspect that it will have the same (bad?) idea like the pax and build the on off connection close to where the most resin buildup appears but after awhile you really need to clean that path so...curious about that one !
 
Belgianvapor,

Slightly Medicated

(SliM) Iron Lungs
top to bottom in a straight line making cleaning pretty easy, here I can't see any other way to clean
the vapor path by bending pipe cleaners and try working behind the corner...

I suspect you use a pipe cleaner through the top of the mouthpiece to get to the vapor path. Then you can just clean the oven out with a q-tip or something. Don't think it will be that complicated. They would really shoot themselves in the foot if it was hard to clean. People can be really fussy about cleanliness.
 
Slightly Medicated,

1_gr8_underdog

Trapped in the Astral Planes Back from the dead
Had another e-mail session with the manufacture/creator. Here are some answers.:tup:
very interesting that they made a point to say the chamber and tube are SS but then just said a metal mouthpiece and didn't elaborate on the material. could have just been an oversight in the email but we will have to see
First to address your earlier question regarding the vaporization path, we will be molding the mouth piece out of stainless steel

What will the cost be?
Regarding the price, we have worked hard to keep all these quality attributes at an affordable price point without compromising the end product. With that said we plan to sell the Indica at a price slightly below $200.00.

Edit: I originally thought they skipped this question when I asked in the first e-mail, turns out that I forgot to ask about this in my first e-mail to them :doh:
About the temperature range.
Your forum members actually assisted us in determining the Vape temp range for herbal THC. Though it may not satisfy everyone, we felt it complimented 90% - 95% of those in the know. Please don't get me wrong, this is what the majority of Vapor consumers prefer and what research has provided, but personal preference prevail.
the chamber looks impossible to empty and clean from that tiny door
But...one big concern I have and that is how easy is it to clean this thing? with the pax you can go from
top to bottom in a straight line making cleaning pretty easy, here I can't see any other way to clean
the vapor path by bending pipe cleaners and try working behind the corner...altough I don't suspect that it will have the same (bad?) idea like the pax and build the on off connection close to where the most resin buildup appears but after awhile you really need to clean that path so...curious about that one !
Regarding cleaning, We have created the Indica Pick which has multiple applications. This stainless steel device can be attached to your key ring and is used for loading / unloading leaf and flower as well as cleaning the chamber. We have provided 5 screens for the chamber which we suggest replacing 1 each after 15 to 20 fills. Additionally we have supplied a wire chamber brush for added inside chamber cleaning. The key to a good draw of vapor is an open air path. The mouth piece is designed to be removed in inorder to give you access to the air channel. Along with the cleaning tools are 5 pipe cleaners. We suggest you clean this area regularly to remove resin buildup close to the chamber. This is a simple task and will keep the flow smooth and the experience enjoyable.\


Info about Packaging
We have put a lot of thought into passing on added value. Being well aware of sustainability and packaging waist, we designed the retail box to be a reusable beautiful lacqered wooden storage container that has a slide out cover with our Logo burnt into the top. It looks like art work and can function in any way you wish after you have taken the Indica out for it's portable use.
Finally, to protect the Indica, we have supplied you with a velvet pull string stash/storage bag to protect the device while in your pocket or on the go.
 

Slightly Medicated

(SliM) Iron Lungs
Your forum members actually assisted us in determining the Vape temp range for herbal THC. Though it may not satisfy everyone, we felt it complimented 90% - 95% of those in the know. Please don't get me wrong, this is what the majority of Vapor consumers prefer and what research has provided, but personal preference prevail.

Bummmer... those temperatures to me seem more recreational then medical... particularly for pain and sedation. I think they really missed the mark on that one. I would be purchasing this one, but the temperature ranges are just too low for what I actually need. I think if people like Sativas and those energetic type highs they will probably enjoy this device. It looks to be doing lots of stuff right in my book... just missed the mark on temperature in my assessment.
 

satyrday

Well-Known Member
I actually like the temp settings on this vape. I am already seeing people looking at me weird thinking i am crazy for sucking on a zippo all the time.
Yes, the Zippo-huffing look might make it a little less discreet than otherwise. But it is all the rage in the North Caucasus I hear! :razz:

Indica Tip #1: Always have a real Zippo up your sleeve, and if a cop approaches (... sleight of hand ...) just show him the real lighter and look all innocent shrugging your shoulders :shrug:
 

toros23

Well-Known Member
I think you are probably right stickstones.. I imagine offering higher temps would also greatly reduce their run times. Yeah, sorry for being mr obvious here.. : )
 

Belgianvapor

Well-Known Member
I've been looking at the pictures of the indica vaporizer and I've been wondering where the air inlets are...as far as I can see there are none, wich means it gets the air needed from the sides of the oven lid, maybe?
This makes me wonder if, when tightly packed, it will have a restricted airflow (like the pax)
At first I was thinking maybe the black square just above the herb chamber is an air inlet but upon inspecting closer I think it's some kind of switch?
 
Belgianvapor,

Mynameismud

Accessory Maker
Accessory Maker
Theres no actual pictures yet, those are just computer generated mock ups so theres no way to know if itll still look like that when it does come out or how it will work.
 
Mynameismud,

visionaries

Member
Battery life (continuous use):
  • 1.5 hours highest setting | 2.5 hours lowest setting
  • Up to 2 weeks of regular use between charges
Sounds good to me! ^^

Well, this vape looks interesting. To me, the stealth factor is awesome. Now, as far as performance, who knows how it will work..but to me the stealth option is great and I would love to see more stealth vape ideas
 
visionaries,
  • Like
Reactions: satyrday

AdmiralAlpacha

Well-Known Member
I guess their definition of "regular use" is a lot different than mine. No way in hell any vape can go two weeks between charges unless it is powered by uranium.

:peace:

Agreed, 2 weeks is totally unrealistic for me.

My inhalater turns off automatically after what I think is 8 Minutes, I will usually do 2 cycles during a session when I'm on the go. So their given 90 minute time on the highest setting that would last me around 5.5 on the go sessions if it is anything like my inhalater. Id say I am not usually gone long enough to warrant 2 sessions. So this would probably last me between 2-3 days then considering I use a desktop unit while at home. Not bad, not really great either, but not bad. I could probably remember to plug it in one of those days. However my dead inhalater nearby argues differently.

My bigger concern rather than the battery or tempurate, is that herb chamber looks awfully small to hold .4g. My inhalater holds around that I believe and the capsules are quite large. I suppose if that chamber runs all the way the length of the vaporizer then MAYBE, but I'm thinking their drawings are a little off, either that or this thing is a lot bigger than I'm expecting.

Edit: After reading through the entire thread it sounds like the chamber does in fact run the length of the unit. Empying and filling might prove complicated however.
 
AdmiralAlpacha,
  • Like
Reactions: RUDE BOY

1_gr8_underdog

Trapped in the Astral Planes Back from the dead
I found a picture a few days ago, I was just waiting on verification to post it. That was given today. It was taken in April during the High Times Cannabis Cup in Denver. :tup:
2VzXaIb.jpg

Since then I was told that the design of the box has been changed slightly.
The finalized box will be slightly darker and shorter in length.
Another detail that was discussed is the addition of a wooden retail box.
It's in final design stages and will be ready for the launch adding value to the overall presentation and Indica experience.
 

Belgianvapor

Well-Known Member
I'm curious if the outside will be in some kind of metal or if it's going to be some sort of metal looking plastic. I don't mind plastic (I love my pinnacle and it's all plastic) but I would prefer an all black (or other color) plastic above a white plastic with a shiny coating on top wich will scratch of in a matter of weeks and I really hope the indica doesn't have some kind of "switch" in the hinge part so you can turn it on, close it and put it in your pocket when it's heating up or close it in between inhales, making it even less obvious that it is a vaporizer.
 
Belgianvapor,
  • Like
Reactions: satyrday

justcametomind

Well-Known Member
While cruising Facebook i came across this in list of sidebar advertisements. i do NOT know anything more than the page explains. thought it looked interesting so i thought i would throw it up here.

http://www.indica2.com/


Sorry Mods i was a bad boy and did not search first

mod note: Please search before opening a thread. Your thread was merged with the existing thread.

This means Facebook knows you vape!
 

overvaped

Vapor evangelist
I like this vape, even if it is not as sophisticated as others, it has marvellous size and looks.
Let's hope they hit their deadline...no more pain waiting for vapes!
 
overvaped,

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
I think this thing looks really promising. I'll bet it's a lot like a pax. But the zippo-esq design is what draws me as a nearly lifelong zippo carrier even after I quit smoking.
 

Belgianvapor

Well-Known Member
I just recieved an email from the manufacturer
(I asked if he could participate on the forum, as it was much apriciated on other forums with other
manufacturers)
He told me he reads on the forums to learn and look for good tips, wich made them have some changes already like making sure the oven door will slide off completely in order to have better acces to the oven
for cleaning/loading.
One of the interesting things he wrote is that the indica appears to work better and roast more evenly
with a non packed oven compared to a packed oven, it would be better to "under fill" the chamber.
So not so comparable to the pax after all then..
Sounds cool if it works well with smaller loads, it would be nice if it worked well with full ovens too.
Lets hope we'll see them in here soon !
 

Bluntcrush

Director of Vapor Research Labs™
Saw it in the new HT and had wondered if anyone here had seen it too! I should have guessed! FCer's are on the ball!
 
Bluntcrush,
Top Bottom