smokie

Well-Known Member
Side by side is fine, the only thing we need to watch for is a connection between a battery's positive nipple and its side.
thanks for fast reply. just wanted to check as i will use case for new batteries that came with walnut mflb. i use my launchboxes less these days but still love them. and will never get rid of them.
and as batteries are safe in the case i can use caps for solo stems :)
 

OF

Well-Known Member
thanks for fast reply. just wanted to check as i will use case for new batteries that came with walnut mflb. i use my launchboxes less these days but still love them. and will never get rid of them.
and as batteries are safe in the case i can use caps for solo stems :)

Interesting idea. I think you can even buy the caps somewhere? As has been said, there's no problem as long as the positive ends don't contact anything. I usually store MFLB batteries that way (in cases) for that reason, but often fill some of the slots in a four cell case with vials of ground bud.

OF
 
OF,
  • Like
Reactions: ataxian

hoptimum

Well-Known Member
Interesting idea. I think you can even buy the caps somewhere? As has been said, there's no problem as long as the positive ends don't contact anything. I usually store MFLB batteries that way (in cases) for that reason, but often fill some of the slots in a four cell case with vials of ground bud.

OF


You can buy caps at a hardware store for about 60 cents. They are called screw caps.
 
hoptimum,

OF

Well-Known Member
You can buy caps at a hardware store for about 60 cents. They are called screw caps.

Thanks. All such are called 'screw protectors' here and those available in that size are much thicker, harder yellow plastic.....I'm told OSHA is helping us out..... The 1/2 inch size is too small and 5/8 falls off.

Like I said, I think you can buy them on line somewhere (OK maybe I forgot the on line part....) but local hardware stores aren't it. Or weren't when I tried.

OF
 
OF,

Amsterdam

Member
animation22am.gif


This is our setup now, LB @ PA & WPW + Ehle 500ml Ice = a total game changer alright! Some next level medicated fade :science:..

P'z
 

hoptimum

Well-Known Member
Thanks. All such are called 'screw protectors' here and those available in that size are much thicker, harder yellow plastic.....I'm told OSHA is helping us out..... The 1/2 inch size is too small and 5/8 falls off.

Like I said, I think you can buy them on line somewhere (OK maybe I forgot the on line part....) but local hardware stores aren't it. Or weren't when I tried.

OF

Not sure where you are, but I've bought gray caps of more flexible plastic that fit perfectly at Home Depot.
 

RUDE BOY

Space is the Place
Nice Amsterdam, Looks Like Your set for a while. Now just add Herb. ENJOY your new vape tools looks like funs a waitin'
OHNO I've been listening to a lot of SUN RA can I buy a Phauk, Really reading this thread makes me want a new MFLB , how it stands now I get to visit my Old One [my first vape] every few weeks [it's happy where it lives now] . think its time to adopt a new Box.....
 

poonman

Well-Known Member
Have anyone checked out the Magic-Flight Launch Phauk yet ?
Only available for interplanetary customers.
phauk5.jpg


Not sure if it have been posted earlier in this thread, but as I just found out...

Edit: Alright, after checking, it's old, but it made me laugh, so I hope it will to the few that didn't know about it.

Super Nice find Ano ,
How would one pronounce that name ?

As a Canadian , it looks like the black round thing you use to play hockey with ....puck .
but I know in that part of the world , the letters " ph " is pronounce like the letter " F " .
I'm actually looking forward to getting " Phauked " sometime soon .
Phauked Bigtime :)
 

Buildozer

Baked & Fried
Thanks. All such are called 'screw protectors' here and those available in that size are much thicker, harder yellow plastic.....I'm told OSHA is helping us out..... The 1/2 inch size is too small and 5/8 falls off.

Like I said, I think you can buy them on line somewhere (OK maybe I forgot the on line part....) but local hardware stores aren't it. Or weren't when I tried.

OF
i got mine at Home Depot.. they were like 70 cents for 2.. mine were grey and they are exactly like the plain black ones that comes w/ the LB. its the right material so 1/2" fits right. mine are made by a company called Crown Bolt... here's a pic of one battery w/ the MF plain black cap and the grey screw protector...
mvrax4.jpg

they didn't even know they had them when i went to look for them... they were pulling out all the hard plastic ones too and they weren't quite right.. but then i noticed these sitting in the same tray..
 

OF

Well-Known Member
i got mine at Home Depot.. they were like 70 cents for 2.. mine were grey and they are exactly like the plain black ones that comes w/ the LB. its the right material so 1/2" fits right. mine are made by a company called Crown Bolt... here's a pic of one battery w/ the MF plain black cap and the grey screw protector...

they didn't even know they had them when i went to look for them... they were pulling out all the hard plastic ones too and they weren't quite right.. but then i noticed these sitting in the same tray..

Interesting. Like I said, 'screw caps' seems to get you something different. After I learned the code, all I got was the hard version as well. I showed one guy the MF one, and was told 'those aren't safe, we don't sell them any more'. Perhaps you got lucky, I think I'll dig some and see if I can share in that. For sure they're available somewhere, they used to be very common. Maybe I need another code name....

I even considered making some. They're dipped vinyl plastic. You can buy cans of goop to dip tool handles in, same stuff. That way you could make your own size and length. If you just want to protect batteries, the caps off Chapstick and similar balms work great for that.

Thanks for the info.

OF
 

Buildozer

Baked & Fried
Interesting. Like I said, 'screw caps' seems to get you something different. After I learned the code, all I got was the hard version as well. I showed one guy the MF one, and was told 'those aren't safe, we don't sell them any more'. Perhaps you got lucky, I think I'll dig some and see if I can share in that. For sure they're available somewhere, they used to be very common. Maybe I need another code name....

I even considered making some. They're dipped vinyl plastic. You can buy cans of goop to dip tool handles in, same stuff. That way you could make your own size and length. If you just want to protect batteries, the caps off Chapstick and similar balms work great for that.

Thanks for the info.

OF
i put a link to home depot for the ones i got... they seem to still sell them on line at least.. weird that they aren't safe haha.. they seem safe enough for what they're for
 
Buildozer,

OF

Well-Known Member
i put a link to home depot for the ones i got... they seem to still sell them on line at least.. weird that they aren't safe haha.. they seem safe enough for what they're for

Thanks. I think the safe part had to do with their showing up on the ends of rebar at construction sites......which I promise not to do.....

I probably should order a few more, for now I'm just stealing them from MFLB kits....of which I have a few..... Like some vape packrat, I've left a few Chapstick tops in the tins for emergency use, but usually use battery cases myself.

OF
 
OF,

Bouldorado

Well-Known Member
Just noticed the views on this thread; almost 2.3 million! Not sure how many are unique, but that's still very impressive :clap:
 
Bouldorado,
  • Like
Reactions: Buildozer

OF

Well-Known Member
Just noticed the views on this thread; almost 2.3 million! Not sure how many are unique, but that's still very impressive :clap:

Oh, I think it's a fair bet that nearly all them there viewers think they're very unique. Extra Special, many of them....just ask 'em. Self esteem is not in short supply these days.

In a rare serious note, I'm sure it has a lot more to do with the special product we discuss (even a fun attitude from those caring folks who make and sell it). That's where the unique and special part really starts, we're just celebrating that here a bit.....and helping a few new friends join in the fun along the way.

I kinda like that.

OF
 

Ace.357

Well-Known Member
Nice album Ukulele no good! Love the nano grinder - looks good and really does a great job of powderizing your herb.
 
Ace.357,

Ukulele no good!

New Member
Where did you get that mflb can for your abv??

That's actually just a standard bud tube one of my pickups came in. When I ordered my finishing grinder I asked if they had any stickers. You can see the MFLB sticker pretty clearly - the one you don't see is wrapped over the other side and is the MF logo you see on the lid of the tin, with the 'love is stronger' message.
 
Top Bottom