Discontinued Vaporblunt 2.0 & VB 2.0 DLX

Pcpvapors

Well-Known Member
You mean Thoughts on what went wrong with your unit, I assume? The units I sent you guys were of the original 100 built. We build 100 units after prototype phase, about half we destroy to test the devices limits. The other half get used by my friends and in this case I gave them out as testers to you guys.There are some differences between your units and the actual production ones. I will have to check with my engineer to see his thoughts, but without seeing it I imagine he will not have a concrete answer.

What had happened is that while in cleaning that silicone o ring had moved and allowed ISO to touch the core, and then upon further investigation the negative terminal wasn't actually soldered or crimped to the core. I just wondered if ISO would have swollen that o-ring which is what allowed it to be dislodged.
 
Pcpvapors,

Jacob Arnold

Nugking IG
You mean Thoughts on what went wrong with your unit, I assume? The units I sent you guys were of the original 100 built. We build 100 units after prototype phase, about half we destroy to test the devices limits. The other half get used by my friends and in this case I gave them out as testers to you guys.There are some differences between your units and the actual production ones. I will have to check with my engineer to see his thoughts, but without seeing it I imagine he will not have a concrete answer.

I never got any emails or anything saying I might've got a faulty unit I'd like to send it back and get one that works properly I don't find that fair that I got no emails or anything saying the first shipment of units were defective.
 
Jacob Arnold,

Pcpvapors

Well-Known Member
I wasn't trying to convey in ANY WAY that my unit was defective I'm only asking questions and trying to sort it out for the sake of others here, so that what ever occurred can be avoided by other users.

EDIT: even if my "unit" was defective in some way shape or form, it wouldn't matter simply because it was infact a test unit, hell it had the sticker to say so on it. Once again I just want to restate especially to TRVB, I'm not trying to sling mud or any bullshit like that, I'm just trying to figure out what occurred so that others can avoid it. and am thankful for even being allowed to be a "tester" of this great project. Quite honestly, I've got nothing but the utmost respect for TRVB and the company.
 

stickstones

Vapor concierge
I never got any emails or anything saying I might've got a faulty unit I'd like to send it back and get one that works properly I don't find that fair that I got no emails or anything saying the first shipment of units were defective.

This applies to free units, I'm sure. If you paid for yours then it should be a production model. If you got a free one to review or test, then you got the first pre-production run and have nothing at stake.
 

TherealVaporblunt

Well-Known Member
Manufacturer
I never got any emails or anything saying I might've got a faulty unit I'd like to send it back and get one that works properly I don't find that fair that I got no emails or anything saying the first shipment of units were defective.

You did not receive a test unit. Pcpvapors received a free test unit, that was what I was talking about.
 
TherealVaporblunt,
  • Like
Reactions: Tweek

TherealVaporblunt

Well-Known Member
Manufacturer
I wasn't trying to convey in ANY WAY that my unit was defective I'm only asking questions and trying to sort it out for the sake of others here, so that what ever occurred can be avoided by other users.

EDIT: even if my "unit" was defective in some way shape or form, it wouldn't matter simply because it was infact a test unit, hell it had the sticker to say so on it. Once again I just want to restate especially to TRVB, I'm not trying to sling mud or any bullshit like that, I'm just trying to figure out what occurred so that others can avoid it. and am thankful for even being allowed to be a "tester" of this great project. Quite honestly, I've got nothing but the utmost respect for TRVB and the company.

I understood what you were saying. I will talk to my team and get an answer for you. Your input has always been informative and helpful, keep up the good fight!!
 
TherealVaporblunt,

Pcpvapors

Well-Known Member
I understood what you were saying. I will talk to my team and get an answer for you. Your input has always been informative and helpful, keep up the good fight!!
Awesome, I just didn't want any confusion or misinterpretation especially in an negative connotation.
 
Pcpvapors,

coolboy74

Member
Is there a difference between all WT (Chandelier, Double Shower, Shower, Star Perk)? Is the difference between them only the design or is there a better one than the others? Because I was about to order the DLX kit but I have no idea which one to choose.. Thank you for your help!

// coolboy74
 
coolboy74,

Pcpvapors

Well-Known Member
Is there a difference between all WT (Chandelier, Double Shower, Shower, Star Perk)? Is the difference between them only the design or is there a better one than the others? Because I was about to order the DLX kit but I have no idea which one to choose.. Thank you for your help!

// coolboy74

They all have different percs in them that's the difference, the double showerhead has twice the percolation of the single showerhead, I can only speak for the showerhead tube but it percs nice. I personally preferred just freezing the concentrate straw and using it with the PonG adapater for flowers
 
Pcpvapors,

stickstones

Vapor concierge
So I loaned my demo VB2 to my LHS owner to try so he could be better versed with the retail unit in his display case. After two weeks he doesn't want to give it back. He's been using it everywhere, especially the golf course.

Just wanted to add that to the discussion. I know this vape is not my cup of tea, but it clearly is a good vape that will make a lot of people happy!
 
stickstones,

TherealVaporblunt

Well-Known Member
Manufacturer
So I loaned my demo VB2 to my LHS owner to try so he could be better versed with the retail unit in his display case. After two weeks he doesn't want to give it back. He's been using it everywhere, especially the golf course.

Just wanted to add that to the discussion. I know this vape is not my cup of tea, but it clearly is a good vape that will make a lot of people happy!

You're the man Sticks.

FYI, I learned today that the gpen with the glass tank fits into our WT very well and makes for a nice experience. You must remove the glass tank and then it slips right in.
 
TherealVaporblunt,

TherealVaporblunt

Well-Known Member
Manufacturer
Dear Mr Pakaloo,

If it isn't too much trouble, could I Take you up on that offer to move the posts I made for the new vape to the candidates thread. The name of the unit is "Pinnacle"

Thank You
 
TherealVaporblunt,
  • Like
Reactions: 2clicker

filteredhead

Well-Known Member
I was happy to see a LHS carrying the VB 2.0 and DLX. The Star perc WT fits and works well with the VXH Cloud. Over-filled it and pulled hard through a few ELBs, never had any moisture make its way to the gong connection.
RbdSH6y.jpg

bWNgVRk.jpg
zKCv3u3.jpg
 

KingBoo

Member
Just in case anyone was thinking of getting the little accessory cleaning brush found on the VB website don't bother. It doesn't fit so it's kind of pointless.
 
KingBoo,

kungzi

New Member
Hey guys, first post here glad I finally found a community to discuss this vape with

I'm still using the VBv1 presently; but I bought the DLX attachment because I read and was told that it is still usable with the VBv1.

I was wondering if anyone had experimented with using the DLX attachment on the VBv1 and what they thought of it.
To me it seems that I don't get as much vapor as I expected. This is the only vaporizer I've ever used, so I didn't know if this was normal or not.
Thoughts? maybe I'm doing something wrong?
 
kungzi,

Stu

Maconheiro
Staff member
I had considered it, but with Cannabis Cup the following weekend, it seemed like too much for this old guy. :myday:

:peace:
 
Stu,

TherealVaporblunt

Well-Known Member
Manufacturer
I had considered it, but with Cannabis Cup the following weekend, it seemed like too much for this old guy. :myday:

:peace:

You should come Stu, I'll be there on saturday and I'll give you a private demo of the pinnacle
 
TherealVaporblunt,

Stu

Maconheiro
Staff member
As pathetic as it sounds, I actually have to work this Saturday. But thanks for the kind offer.

Have you given any thought about going to the Cannabis Cup TRVB?

:peace:
 
Stu,

TherealVaporblunt

Well-Known Member
Manufacturer
I'm planning to be there Saturday. :brow:

Sweet, see you there. This goes for anyone that wants to get special attention at our booth, mention "I'd like the FC discount". We will show you a good time. Even if you're not buying anything ask for the FC discount anyways, it will get you at least a free session with anything you have wanted to try.
 
Top Bottom