Roger D

Vapor Wizard
My FV seems to have been stuck somewhere :\

That's like a month++ since it has been shipped
 
Roger D,

LeTchen

A toute vapeur !
Retailer
My FV seems to have been stuck somewhere :\

That's like a month++ since it has been shipped

Salut Roger....... It can be a problem without tracking number (but for this price FV can't send with tracking.... I think it would be better for FV and customers that they increase the price of 10 bucks and have a tracking). I hope you receive it soon, but one month seems to be lost, or a french postman enjoy the vape !
I'm really sad for you Roger :cry:....... have you gone to the post office ?
 
LeTchen,

stickstones

Vapor concierge
I think the abv on the left (the pic on the last page) looks just like a load out of my mflb when I vape it to hell and back to the point it tastes like shit...no combustion, but about as close as you can get.
 

Roger D

Vapor Wizard
Salut Roger....... It can be a problem without tracking number (but for this price FV can't send with tracking.... I think it would be better for FV and customers that they increase the price of 10 bucks and have a tracking). I hope you receive it soon, but one month seems to be lost, or a french postman enjoy the vape !
I'm really sad for you Roger :cry:....... have you gone to the post office ?

I don't think my post office can help, I will try tomorrow to ask if they have something for me stuck there but its like 1% probability. I have to ship back some crap anyway

The manufacturer says they are going to check with Canada postal services.

Unfortunately it is 30$ more for the tracking, that's why they don't consider the option.

I was about to receive the FV as a gift, so I didn't loss any money. I may order another one later
 
Roger D,

LeTchen

A toute vapeur !
Retailer
The top screen is removable but might not be easy to get back in place.

yes, you can soak the whole top cap in alcohol without any problem. however, you may find it is better to unscrew the bezel and remove the glass crystal for a more thorough cleaning.

We will be releasing the mesh filter screen as a replacment part as well very soon. As mentioned in an earlier thread, the mesh is not hard to remove and replace by hand, if you are careful. There were also some techniques discussed earlier, I will edit this post after finding it for your easy reference.

The black tube is heat shrink tubing, and is OK to soak in alcohol without any problem.

EDIT: (added this quote from earlier thread)

... that screen is actually not that hard to put back in once you get the hang of it... just take the o-ring out first, and put the screen's folded sides into the circular slot, making sure it is seated and centered. Then, push one side of the o-ring into the slot first, and press and hold it down with your finger tip. Now, with that one small section secured, slide and press the rest of the o-ring into place in a circular motion with the tip of your fingernail until you make your way all the way around (a tiny bit of stretching is required as you make it past the 1/2 way point). Now with the o-ring placed into the circular slot, carefully press down on the o-ring all the way around once again with the tip of your finger nail or a small blunt pointed tool, pushing the o-ring firmly in place into the slot, for a tight fit. The filter screen is now securely in place and ready to use.

I just take it all apart, soak in alcool and rinse with hot water.... assembly and disassembly of the top mesh is was very easy for me (I do Harley mechanic, so it's not that little thing that will piss me off :lol:) ... how much is this mesh ? 400 ?..... because I have for years with the DID of my wife !!

Another question : can we unscrew the top (where is the ceramic chamber) or it's out of warranty if it's open ?
 
LeTchen,

pakalolo

Toolbag v1.1 (candidate)
Staff member
I just take it all apart, soak in alcool and rinse with hot water.... assembly and disassembly of the top mesh is was very easy for me (I do Harley mechanic, so it's not that little thing that will piss me off :lol:) ... how much is this mesh ? 400 ?..... because I have for years with the DID of my wife !!

Another question : can we unscrew the top (where is the ceramic chamber) or it's out of warranty if it's open ?

Disassembly beyond normal operation voids the warranty. If you unscrew the top of the heater, then I think you've lost the warranty. (Sorry, Pipes.)

...because I have for years with the DID of my wife !!

I don't understand this part.
 
pakalolo,
Sorry for you Roger. FV sent mine with tracking number at the standard price - must've changed their policies or maybe got a bulk discount.
 
kelper,

KatFeith

Member
Blah, it annoys me knowing that it's possibly just sitting there.


Your Item Status:
Your item has been processed through our sort facility in ISC SAN FRANCISCO (USPS) at 9:57 pm on January 22, 2013.
 
KatFeith,

LeTchen

A toute vapeur !
Retailer
I don't understand this part.

I offered to my wife a "safe" e-cig called Mini-Did in stainless steel, made in Greece, and the system called "Genesis" employs stainless steel mesh to make yourself the wick, you can see the mesh that's rolled to form a wick (with the coil around) :
minidid-4.jpg


And I have some of these sheets (A4) of mesh in 200, 325 and 400.... so it's very easy to make a new screen with just scissors ;)............ this is a good information for your destroyed screen Pakalolo :)
 

OF

Well-Known Member
Your Item Status:
Your item has been processed through our sort facility in ISC SAN FRANCISCO (USPS) at 9:57 pm on January 22, 2013.

Don't worry, mine did exactly that. Showed like that even after I got it a day or so later. Never got scanned again near as I can tell? Was still in SF. Yet I had it. Computers, you know.

Give 'em a little time, not even to PO can loose 'em for too long these days.

OF
 

LeTchen

A toute vapeur !
Retailer
Don't worry, mine did exactly that. Showed like that even after I got it a day or so later. Never got scanned again near as I can tell? Was still in SF. Yet I had it. Computers, you know.

Give 'em a little time, not even to PO can loose 'em for too long these days.

OF

:rofl::lol: It seems that the Posts are the same all around the world !!!
 
LeTchen,
  • Like
Reactions: OF

jardri

Vapor Dreams
Hola hombre ! Remember that yesterday was the first time for me ! Today my ABV is more brown than dark... I'm learning to ride this crazy horse... better today :)
My Solo was at temp max (7) and no more vapor came, and I have a SS bowl too......
What do you mean by "a steel herb chamber cloud style I made" ? Have you pictures ?

Yes I have photos hehe http://fuckcombustion.com/threads/arizer-solo.3833/page-434#post-322163
but I dont have any photos of my vaporized material :-( but if you try that really works well
 
jardri,

jardri

Vapor Dreams
That ABV above looks like the result of having combusted in the FV. As many members can attest, after some practice with using the FV, combustion can be easily avoided using the different techniques discussed in detail throughout the thread.

here is a picture of pakalolo's tiny 0.05g load's ABV after 23 hits* in the FV, WITHOUT combustion:



A picture speaks a thousand words, but can also be misleading. The FV is a very powerful vape, that gives almost INSTANT, ON DEMAND performance. It is versatile, and good for a variety of applications using different blends, both organic herbs and solid concentrates. However, it is a powerful machine and must be used with some level of restraint when first learning to master its usage. If you are combusting, a little shorter power-on time, or a little faster pace of draw speed will change how this vape behaves. Once you get used to how it works, vaping with the FV will come as second nature to you, and you will really be able to enjoy the FV's abundant power to the fullest. But before you are comfortable with unleashing the beast, please take it easy first... practice makes perfect!

That herbs also seem a little burnt :hmm:
 
jardri,

Tweek

Well-Known Member
That herbs also seem a little burnt :hmm:

The FV can and will burn your herb if you are not careful. I wouldn't recommend it if you are someone who prefers more automation in the process. If you are like some of us, and enjoy playing around and experimenting, then it is a very rewarding vape.

Edit: Just put my Pax on the charger and dropped a whole nug into the FV for fun, no grinding. It's roasting along nicely indeed. :spliff: Will have to crumble it up in a bit, but boy is the flavour off this thing fantastic. I really notice how pure it is, especially after coming right from using the Pax.
 

Vapzilla

Well-Known Member
The FV can and will burn your herb if you are not careful. I wouldn't recommend it if you are someone who prefers more automation in the process. If you are like some of us, and enjoy playing around and experimenting, then it is a very rewarding vape.

I'll 2nd that!
It's very versatile, if you want to cook through a load, push it, get big hits and good vapor.
If you need to be a little stealth, go easy on her, great taste longer, less visible vapor with the same end result!
 

pakalolo

Toolbag v1.1 (candidate)
Staff member
That herbs also seem a little burnt :hmm:

As I said in the original post, the contrast made it look darker than it was. I can assure you that none of that ABV was burnt. I know combustion when I reach it, and that stuff did not come close.

The FV can and will burn your herb if you are not careful. I wouldn't recommend it if you are someone who prefers more automation in the process. If you are like some of us, and enjoy playing around and experimenting, then it is a very rewarding vape.

Edit: Just put my Pax on the charger and dropped a whole nug into the FV for fun, no grinding. It's roasting along nicely indeed. :spliff: Will have to crumble it up in a bit, but boy is the flavour off this thing fantastic. I really notice how pure it is, especially after coming right from using the Pax.

Kief Boy and I did that with tasty success. I know I wrote about it somewhere but it could have been in a PM.

Don't get me started on the taste you get from a Pax...
 

jardri

Vapor Dreams
I had to make wonders for getting my solo vaporizing everything at the same time and no getting "dark spots". I used to have a MFLB and hated when it happened I am very obsessive with that so this Flashvape seems quite frustrating for someone like me.
 
jardri,

JoeKickass

Well-Known Member
I had to make wonders for getting my solo vaporizing everything at the same time and no getting "dark spots". I used to have a MFLB and hated when it happened I am very obsessive with that so this Flashvape seems quite frustrating for someone like me.

Honestly it's a pretty unique vape so it's hard to know if you'd like it until you live with it for more than a week.

I didn't like the batteries and combustion at first but it's growing on me, I use about half what I did with the Pax and get only slightly less medicated
 

OF

Well-Known Member
Don't get me started on the taste you get from a Pax...

Amen to that. And ixnay on that....ya gotta watch out for them Moderator guys, they're everywhere these days you know. Get one on your case and you're toast for sure!

Honestly it's a pretty unique vape so it's hard to know if you'd like it until you live with it for more than a week.

I didn't like the batteries and combustion at first but it's growing on me, I use about half what I did with the Pax and get only slightly less medicated

Well put, JKA. It is a different sort of beast. Very set in it's ways and unlikely to change no matter how nice you ask. I too got into trouble at first by assuming I understood it and how it should work. The results can be pretty random that way. But once I started with a base plan that worked OK (five second preheat, medium draw for me) and ran a series of 'small step, cautious experiments' to learn where the boundaries were it got much better. It's kinda neat how quickly it became natural to get 'results on demand' once I stopped fighting it and did it the way the FV wanted.......

And between you and brother Pak you've just made me all the happier I gave Pax the pass a bit ago. That kinda performance I already have elsewhere and am not using it out of choice. Color me strange for not going for a pretty little vape that eats expensively and tastes poorly. I had a girlfriend like that years ago, glad I moved on there too.

Great thing this here Forum. Your experiences shared here keep guys like me from 'going there' so we can use our money for other vapes and false drugs.....as it should be.

OF
 

LeTchen

A toute vapeur !
Retailer
I think more and more than the FV needs a sort of "break-in" (like a motor car)..... I can feel that the FV is better than when I received it.... or it's me, I don't know :)
 

FlashVAPE

...fast and efficient ! http://flashvape.com
Manufacturer
I think more and more than the FV needs a sort of "break-in" (like a motor car)..... I can feel that the FV is better than when I received it.... or it's me, I don't know :)

…this may actually be true as material will tend to stick to the screen less after some use, with the buildup of oxidization on the screen surface.
 
FlashVAPE,
  • Like
Reactions: LeTchen

LeTchen

A toute vapeur !
Retailer
…this may actually be true as material will tend to stick to the screen less after some use, with the buildup of oxidization on the screen surface.

I agree totally :)
I think you can add a little explanation on how to use, like: "For the 8/10 first bowls, open the lid after the first three or four puffs to ensure that the material does not stick to the screen, if this is the case, gently peel off the grass with the brush supplied with the kit. Once this breaking is complete, you will just have to shake the FlashVAPE, the grass will not stick anymore. This breaking should be done at each change of screen "
 

OF

Well-Known Member
…this may actually be true as material will tend to stick to the screen less after some use, with the buildup of oxidization on the screen surface.

I'll suggest taking this a step further with my experience. Mine had a combustion accident a while ago. As part of the cleanup I flamed the protective screen. I pulled it out by one of the tabs, held it there in a clamp and nuked it with the mini torch until it glowed. This burned it clean (removing the smell in the process) but it also discolored (oxidized) the screen (no real problem with performance of course). Since then there has been no sticking of anything?

OF
 

LeTchen

A toute vapeur !
Retailer
I'll suggest taking this a step further with my experience. Mine had a combustion accident a while ago. As part of the cleanup I flamed the protective screen. I pulled it out by one of the tabs, held it there in a clamp and nuked it with the mini torch until it glowed. This burned it clean (removing the smell in the process) but it also discolored (oxidized) the screen (no real problem with performance of course). Since then there has been no sticking of anything?
OF

It's what we do to make a wick. To oxidize the mesh allows the ss to be not conductive, prerequisite for a Genesis system (or we have short circuit :disgust:... no good at all !)...... it's not the purpose here, of course. And you notice that the material really does not stick to the screen after this operation, OF ?

If it works, it's worth it to do it for FV at manufacturing ;)
 
Top Bottom