treecityrnd

Active Member
My glass stem arsenal:
stems007.jpg

From Left to Right:
3.5" HI Turbo Tube (for Nano direct draw & 14mm H20)
2.5" HI Turbo Tube (for Nano and 14mm H20)
NEW 18mm All Glass Andy Tube (for Nano and Mobius, thank you!!!)
18-18mm male-male joint (for EV2 and Mobius)
LSV shorty wand (18mm for EV2 direct draw)
DBV wand (18mm for EV2 direct draw and whip if necessary)
Glass Aromatherapy cup (for Nano and other logs)

Loving the new 18mm Nano stem! It's a little long but the Nano has plenty of heat to get the job done.

I like mine set at ~6.5 and turn up the temp a little for concentrates. Probably possible to combust at max on the dial.

6.5 is about where I have mine also. It's pretty hot at 6.5, would be maxed out on other log vapes. I'd venture to say you could combust on 8 if you had a slow draw and the port were close to your load. It's a hot little girl...or kitty?
Hello E-Nano!

Quick Nano Review: I like the open core design (similar to the HI for reference, not a closed core like an UD or Zap. It makes the airflow less restricted and you can blast through a load if you want. This is a power hitter, don't kid yourself because of the size. But because of the port size, you can use almost any UD, HI or other "over the port" stem. More laters...Enjoy your Nanos!
 

ACE OF VAPE

Vape outside the box
Manufacturer
got my walnut nano today and after extensive testing :ko:i love this vape! Didn't include any instructions so took a little bit of time getting it dialed in but its great and i don't mind the extra trials. I got the all glass stem and have been vaporizing through my micro toro circ/circ with attached circ microverter, using included silicone makes a perfect seal with 14mm gong. Huge tasty rips! Even brown avb after stirring through session and very efficient. I like mine set at ~6.5 and turn up the temp a little for concentrates. Probably possible to combust at max on the dial. Flavor is really superb as is effect.
Glad you're loving the E-Nano. Nothing makes a designer/builder happier!
Working on the instruction page. Here's what I do. Your results may vary.
1) Turn on E-Nano to 10
2) Put a small amount of Herb (.08-.15g) into the glass stem. (I don't grind it first)
3) After 2mins turn E-Nano down to 5-6. Pick up the E-Nano and carefully put the wand onto the heater until it stops. Inhale smoothly, Enjoy. Repeat, stir, repeat. Enjoy.
4) Turn E-Nano off... Or not.
 

treecityrnd

Active Member
Inhale smoothly, Enjoy. Repeat, stir, repeat. Enjoy.
4) Turn E-Nano off... Or not.
You missed a couple "repeats" there...

Just posted this in the EV2 thread, but I wanted to repeat it here. The best ACT-like comparison I can make is (IMHO):
EV2 is to LSV as Nano is to UD/HI

Genius!
v v v
 

momofthegoons

vapor accessory addict
Well tree, it looks like you finally found the log vape you were looking for; one with all glass stems. :tup:

Loving the new 18mm Nano stem! It's a little long but the Nano has plenty of heat to get the job done.

Is that the one with the glass screen?
 
momofthegoons,

newVaper420

Vapor Enthusiast
Glad you're loving the E-Nano. Nothing makes a designer/builder happier!
Working on the instruction page. Here's what I do. Your results may vary.
1) Turn on E-Nano to 10
2) Put a small amount of Herb (.08-.15g) into the glass stem. (I don't grind it first)
3) After 2mins turn E-Nano down to 5-6. Pick up the E-Nano and carefully put the wand onto the heater until it stops. Inhale smoothly, Enjoy. Repeat, stir, repeat. Enjoy.
4) Turn E-Nano off... Or not.

How long does it take to change temperatures from 10 to 5?
 
newVaper420,

toros23

Well-Known Member
WOO HOO, just got my GonG adapter! Thanks Andy!

Excited to see others getting to enjoy the E-Nano. I'm getting so spoiled with this little guy and the new adapter will make it even better. As a beta tester there really isn't much to report other than what has already been said. Endless power in a small/perfect package. Getting 4 to 5 really nice rips with .1 to .14 of good material.
 
WOO HOO, just got my GonG adapter! Thanks Andy!

Excited to see others getting to enjoy the E-Nano. I'm getting so spoiled with this little guy and the new adapter will make it even better. As a beta tester there really isn't much to report other than what has already been said. Endless power in a small/perfect package. Getting 4 to 5 really nice rips with .1 to .14 of good material.

Where are the pictures?? :D
 
slowandsteady,

toros23

Well-Known Member
Scroll up and you can see a photo of the GonG in the post from treecityrnd. It has 7 tiny holes and is about 3/4" tall by about 1/2" in diameter at the end (tapers down to 3/8"). I posted a photo of the E-Nano a while back on page 3, it is the same photo as on the epic site.

I tried to get some video but could not do it justice.
 
toros23,

shredhead

Specialist
Kinda wish I got the 18 mm adapter for a change up from silicone. Oh well I'll live I'm sure!!
 
shredhead,

Ed's TnT

Woodsman
Manufacturer
Time for some pics, this thing is so clean and well put together I am so digging its look. I started it out at 8 on the dial, to warm it up then dialed it back to 5 where it gave great vapor. I quickly learned that you dont need to grind the herb, it can simply be crumbled between your fingers. I started using the stem with the glass screen. If the grind is to fine you will inhale the small bits. But no big deal, get your load right and place it over the heater core. It provides really great vapor and out performed the one I tried back in August. I have some Blue Widow left, only a couple small buds but wanted my first hits to be of the best. I hit it 3 times and was really coughing after each one. I had to set the stem down and back off of it for a minute, I was baked. I like how it has epicvape over the indicator light. The label on the dial really helps too. I have only had a couple stems out of it yesterday and have the next two days to really explore it. I am so glad I have one of these and cant wait to get to know it more.

Andy you have really made a great piece and I am super happy for you and know this is gonna be a success.

Well done man, well done!

20130122164102250.jpg


20130122164157954.jpg


20130122164221592.jpg
 

Shad0w99

Well-Known Member
hoping for more user videos! ( please show the amount of herb used if possible )

How is the efficiency of the E-nano? Those of you who have multiple vaporizers, where would you place the E-nano in terms of efficiency?

Thank you
 

newVaper420

Vapor Enthusiast
Oh, I just looked at the website. They added a new "All Glass 18mm GonG" adapter. Shit, I would have ordered that if it was up there. Now I might have to make another order. I didn't realize there was going to be two sets on GonG's.
 
newVaper420,
Top Bottom