• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued Pax Vaporizer by Ploom

Status
Not open for further replies.

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
Still infatuated with my gorgeous little Pax!!

Say, I've seen some conflicting info on cleaning the oven door. Is it ok to soak it in iso for a bit to clean it? I know it's ok to soak the mouthpiece, but not sure about the door...

NO. Do not soak oven door. It will full up with Iso. Just use USO on a qtip.

EDIT: ISO not USO! Damn iPhone autocorrect!
 
VaPeD&CoNfUsEd,
  • Like
Reactions: Vitolo

welderboy

its 4:20 somewhere.....
the oven door is filled with a white powder that acts as insulation.....so you don't want to soak it.
 
welderboy,
  • Like
Reactions: mollee

JPB

Well-Known Member
So no door soak. My batt mod works so well, made a 9v battery to charge cradle mod. It resets pax after low voltage condition occurs. So slide the guts out rip the flat batt, pop a charged batt. Slide shut, connect to 9v batt via cradle, plug in and unplug After light comes on. Boom full again.. Load the oven up and keep on walking. Goodnight y'all. Keep in pax and mflb comes to bed, pax on the bed side table all loaded with pipe tobacco for early rise instant nic delivery.
 
JPB,

SunDoobie

Member
I just ordered the Onyx from Plume today. I have been following this thread for months but I better refresh and reread the last hundred pages at least especially the cleaning processes. I was hesitant due to the constant problems people have had but I figure I might as well just take a shot. Combustion and the smell sucks!
 
SunDoobie,
  • Like
Reactions: mollee

kushcloud

Well-Known Member
Just enjoying this lovely day with a glass of Estrella lager beer and some purple kush. Pax chargin up and will get some lunch soon. YUMMY! :) PS. HAPPY NEW YEAR!!
2upy6uf.jpg
 

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
U got it buddy! MMMM! LOVE CANADA! The taste is phenomenal and the crystalization out of this world. Wait till i break that apart and macro it. Panty dropper im tellin yeah!

I've got some broke up macro shots of some but I don't know how to post pics on here from my iPhone.
 
VaPeD&CoNfUsEd,

rgs3

Member
Just ordered mine! Question, does anyone know if Ploom is going to make a home vape? I would buy the shit out of a home vape too if they made it.
 
rgs3,

UnixRasta

Well-Known Member

Very nice, I have been trying to get hold of a Mobius Matrix for quite a while now.
Can you post a closeup of your connection method, or explain what you used to
connect the PAX to your Matrix? Where did you get the components?
I am about to pull my PAX out of the drawer where it has been sitting for almost a month now,
specifically for this type of a project.
 
UnixRasta,

welderboy

its 4:20 somewhere.....
i used a piece of 1/2 inch i.d clear tubing from home depot . jamband gets all the credit, she has closeup pics a ways back. basically just cut a two inch piece and stretch the one end over the mouthpiece. its a pain in the ass to get it on, but it fits perfect. the other end slides into an 18mm female joint. its not perfectly airtight but i was thinking an o-ring on the tubing would fix that. other than that it hits like a boss, good luck on the moby,,,, i don't think there's one left on the planet. :ugh:
 
welderboy,

rendole

New Member
Still waiting for my pax to come in mail it's been a week now, usps tracking link says "your item is being processed by customs in Canada" that's not a bad thing is it?
 
rendole,

Tweek

Well-Known Member
Still waiting for my pax to come in mail it's been a week now, usps tracking link says "your item is being processed by customs in Canada" that's not a bad thing is it?

Usually takes 10 days from USA to Canada. Processed by customs is a normal message. It will come :)
 
Tweek,

rendole

New Member
Usually takes 10 days from USA to Canada. Processed by customs is a normal message. It will come :)
Phew, I googled it and the first few things that came up were making it sound like a bad thing. Although most were talking about how they were going to tax the package or something
 
rendole,
  • Like
Reactions: Tweek

UnixRasta

Well-Known Member
i used a piece of 1/2 inch i.d clear tubing from home depot . jamband gets all the credit, she has closeup pics a ways back. basically just cut a two inch piece and stretch the one end over the mouthpiece. its a pain in the ass to get it on, but it fits perfect. the other end slides into an 18mm female joint. its not perfectly airtight but i was thinking an o-ring on the tubing would fix that. other than that it hits like a boss, good luck on the moby,,,, i don't think there's one left on the planet. :ugh:

Thanks for the reply.
I had copied down Jam's specifications when they were posted.
I will take a look at Home Depot this weekend for a 1/2" OD 3/8" ID 1/16" Wall soft silicone tube.
I may have to settle for a ZOB bubbler in the mean time....
There is also a dual-male glass adapter at ALT since the ZOB has a female slide joint.
I am interested to see how the PAX works through a ZOB or MM bubbler.
 
UnixRasta,

Tweek

Well-Known Member
Phew, I googled it and the first few things that came up were making it sound like a bad thing. Although most were talking about how they were going to tax the package or something

They might hit you with fees at the border, but that's pretty much standard.
 
Tweek,

jambandphan03

in flavor country
tubing can vary a bit in sizing, since the mouthpiece on the pax is tapered, you can use up to 3/4" but it won't fit in the smaller 14mm size connection, but if you are using 18mm it works just fine too, just fits further down on the mouthpiece.
 
jambandphan03,
  • Like
Reactions: Bluntcrush
Status
Not open for further replies.
Top Bottom