Discontinued The Hammer Vaporizer

Hammer Vaporizer

Well-Known Member
Manufacturer
Hopefully my long-winded introduction did not bore you guys :mental: ...but I love my job!

We have already acted on your suggestions. For those of you wanting more UMPH... we have created a larger stem. Aaron should be posting the details later today.

David


I personally thought your introduction was quite riveting :D.

As David mentioned, just added a couple of new things to the store I think you guys will like...

EXTRA DEEP Mouthpiece
We now have a batch of hitters with the ridge that catches the screen moved down about twice as far as the standard one. This allows double the load size for those of you that wanted to be able to put a bit more in a single bowl.

We tested it for a few days and it works very well :ko:. If it's packed too tight, it can produce a bit more uneven result, but keeping it packed loosely and giving it a few little taps with the Hammer to stir the material during your session, totally even that out. I was able to get at least 8 thick hits out of a load consistently.

They come in a set of 2 with screens and a nail for $19.99.

http://www.thehammervaporizer.com/collections/accessories/products/2-extra-deep-mouthpieces

hammer-deep-stem-500x500_large.jpg



14mm Glass-on-Glass Stem
These will fit any 14mm glass-on-glass slide so can use the Hammer with your favorite glass piece. I know several of you have already found ways to water filter with the Hammer, but this might make it a bit easier to adapt.

It's sold as a single piece and also comes with screens and a nail for $19.99.

http://www.thehammervaporizer.com/collections/accessories/products/14mm-glass-on-glass-stem

hammer-gong-500x500_large.jpg



I added a $3 flat rate USPS Standard Mail delivery as a shipping option for orders under $40, so that means you could order both the Deep and the GonG ($39.98 total) and get them sent for $3. Or if you have yet to order a Hammer, you can add these to your order and get them shipped free with it.

These were born from your feedback, please let us know what you think and if there is anything else you would like to see or have any questions.
 
Hammer Vaporizer,
  • Like
Reactions: momatik

Egzoset

Banned
Salutations Hammer Vaporizer,

About this:



...

My appologies, i must be blind but i wonder about what length seperates the rim and the relief feature near it, below the top on this picture.

...'cause i'd be curious to know how that might fit elsewhere...

:peace:
 
Egzoset,

Hammer Vaporizer

Well-Known Member
Manufacturer
Salutations Hammer Vaporizer,

My appologies, i must be blind but i wonder about what length seperates the rim and the relief feature near it, below the top on this picture.

...'cause i'd be curious to know how that might fit elsewhere...

:peace:

Hi Egzoset,

The length from the bottom of the flared rim to the notch for the screen (the fill area essentially) is...

Standard Mouthpiece = 10-11mm (approx. 7/16")
Deep Mouthpiece = 19-20mm (approx. 3/4")

The diameter of the mouthpieces are...

Outside = 10mm
Inside = 8mm

The inside 8mm diameter is what is in direct contact with the heat exchanger.

Hope that helps! Lmk if you have other questions.
 

Soulhunter

Active Member
This one actually looks like it can give my vaporgenie some competition. I really want to get my hands on one off these. No problem getting one sendt to EU?
 

Hammer Vaporizer

Well-Known Member
Manufacturer
This one actually looks like it can give my vaporgenie some competition. I really want to get my hands on one off these. No problem getting one sendt to EU?

We currently do not ship retail to EU directly, but one of our resellers like VaporNation (see http://www.vapornation.com/store/the-hammer-vaporizer.html) can help you I'm sure. They are currently running a special on the Hammer for $129.99.

We do plan to start shipping internationally early next year.
 
Hammer Vaporizer,
uh idk, I've been using my iolites and whisprs like that for a very long time. Really trying to get off analog (smoking) cigerettes.

 
biojuggernaut,
  • Like
Reactions: OF

OF

Well-Known Member
Hammer,
If I was to put ejuice on a piece of cotton how would I go about not combusting?
uh idkI've been using my iolites and whisprs like that for a very long time. Really trying to get off analog (smoking, ) cigerettes.

I think the simple answer is don't do it. Far to easy to combust and you don't want to be sucking on burning cotton really.....

Iolite (and DV, HA and other vapes in that class) is fine since there's temperature control on your side. The air is never allowed to be heated past 400 or so degrees. Not so with the Hammer, TV products, Lotus, VG and so on where the heat source can get hotter than 400 and therefore heat the cotton too hot.

OF
 
OF,
thanks OF the exact answer I was looking for!! What is the DV? I realize no one has one yet but Do you think the venus would be best suited for my needs? I can no longer use greenherbs due to legal troubles :[
 
biojuggernaut,
  • Like
Reactions: OF

Head Tools

Well-Known Member
Manufacturer
Hammer,
If Iwas to put ejuice on a piece of cotton how would I go about not combusting?
The Hammer should actually work very well with e-cig juice, but I would not use cotton. Although combustion is unlikely, I would suggest putting a piece of very fine stainless steel wool in the glass stem. This should provide plenty of surface area to hold a few drops and will not burn.

David
 

OF

Well-Known Member
thanks OF the exact answer I was looking for!! What is the DV? I realize no one has one yet but Do you think the venus would be best suited for my needs? I can no longer use greenherbs due to legal troubles :[

You're welcome. DV is Da Vinci, a neat little portable battery powered convection vape:
http://fuckcombustion.com/threads/davinci-pocket-vaporizer-by-karma.4928/

I'm sorry, I don't know Venus.

As 'da man' suggests below, the idea is good I think, just not the cotton part. I was thinking the special pad material that the Volcano folks sell for using concentrates, basically a woven .003 inch SS wire, and 'improved steel wool pad' if you will. I've got some somewhere (I use it in HA and others with success with oils) along with some PG tincture. I'll try to get it all together and try it out for you.

OF

The Hammer should actually work very well with e-cig juice, but I would not use cotton. Although combustion is unlikely, I would suggest putting a piece of very fine stainless steel wool in the glass stem. This should provide plenty of surface area to hold a few drops and will not burn.

David
 

OF

Well-Known Member
Although combustion is unlikely, I would suggest putting a piece of very fine stainless steel wool in the glass stem. This should provide plenty of surface area to hold a few drops and will not burn.

I was thinking the special pad material that the Volcano folks sell for using concentrates, basically a woven .003 inch SS wire, and 'improved steel wool pad' if you will. I've got some somewhere (I use it in HA and others with success with oils) along with some PG tincture. I'll try to get it all together and try it out for you.

So it does work, and very easily. I'm not sure it's better than the traditional units, but it does work.

Good luck.

OF
 

Head Tools

Well-Known Member
Manufacturer
So it does work, and very easily. I'm not sure it's better than the traditional units, but it does work.

Good luck.

OF

I have tried putting a bit of concentrate on top of a filled stem... and it worked very well!
But concentrates are rare in my area and I havent been able to do as much testing as I would like to.

What was the consistency of the material in your test (on the SS wool)?
 
Head Tools,

OF

Well-Known Member
I have tried putting a bit of concentrate on top of a filled stem... and it worked very well!
But concentrates are rare in my area and I havent been able to do as much testing as I would like to.

What was the consistency of the material in your test (on the SS wool)?

No, I'm not a fan of 'concentrate on bud' accidents happen that way. I used the pad from the Volcano made for the purpose like I described above....it's not 'wool', but a superior material (smooth fine wire) intended for just this use. Minimal material, nothing to fall apart or get sucked into your lungs (I don't like the idea of steel strands in the lungs, do you?).

I used quite thin oil (kind of a worst case). A drop or two 'soaks right in' when dropped off a heated needle.

OF
 
OF,

Head Tools

Well-Known Member
Manufacturer
No, I'm not a fan of 'concentrate on bud' accidents happen that way. I used the pad from the Volcano made for the purpose like I described above....it's not 'wool', but a superior material (smooth fine wire) intended for just this use. Minimal material, nothing to fall apart or get sucked into your lungs (I don't like the idea of steel strands in the lungs, do you?).

I used quite thin oil (kind of a worst case). A drop or two 'soaks right in' when dropped off a heated needle.

OF

Thank you... That is very helpful.

Have you tried with thicker concentrates?
Does it "vape out" of the pad cleanly... or does it become clogged after a few uses?
 
Head Tools,

OF

Well-Known Member
Thank you... That is very helpful.

Have you tried with thicker concentrates?
Does it "vape out" of the pad cleanly... or does it become clogged after a few uses?

You're welcome.

No, some really thick wax/shatter is on the list. Got to clear some of the good stuff, but it'll happen now that I'm moving this way......

OF
 
OF,

Head Tools

Well-Known Member
Manufacturer
I just added some info on the Hammer to the "Portable Charts" thread...
Thought that I would add the info here too...

The Hammer is:
5.29" (13.4cm) tall
2.77oz (78.6 grams)
20 second warmup
$139
Adjustable Temperature YES
Butane Power
1 Year Warranty
Auto Shut-Off YES
 
Top Bottom