• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Thermovape DART and EGO-C.. can they work together??

mmenzie

My friends call me "Menz"
Thermovape is selling it's DART 3.7 LV on it's site again. that has 510 threading and will thread onto the EGO without an adapter correct?? also... will the dart work with wax as well as oil?? does the 10 second cutoff from the EGO make it not a good choice to work together???
 
mmenzie,

mmenzie

My friends call me "Menz"
are there any DART owners out there that can confirm if it is indeed 510 threading?? also do you thing the 10 second cutoff from the ego battery will hinder it??
 
mmenzie,

Trever

Well-Known Member
mmenzie you are correct it is 510 threading and the 10 second cutoff will get very annoying being 10 seconds is about minimum warm up time. Probably will work but my guess is you wont be satisfied. Get a pass through or a no cutoff switch. Like the thermovape "mechanical" switch. Dart works preferibly with stable clean wax. But oils work just have to be carefull not to overload.

<3
 
Trever,

harmudge

Active Member
I thought that the Ego may need an adaptor to accept 510 threads, a friend has an ego and I was sure she couldn't use my cartomisers as I have a 510 threaded PV.
 
harmudge,

mmenzie

My friends call me "Menz"
I thought that the Ego may need an adaptor to accept 510 threads, a friend has an ego and I was sure she couldn't use my cartomisers as I have a 510 threaded PV.

i am no expert but i bought this:
http://www.tropicalvapors.com/Adapt...artomizer-Omicron-Super-Nova-Smoore_p_68.html

and this fit on my EGO and allowed me to thread an Omicron cart onto it. this says it's for 510 devices and it fits mine without issue. so my natural assumption is my EGO is 510 threaded
 
mmenzie,

mmenzie

My friends call me "Menz"
How does it work? the ecig with omicron cart?

i wish i could tell you from experience but i can not. i do not have access to quality oil so i made some and it did not work. after asking around it seems i did not have enough loaded. i was told you need at least .5 and no more than 1.0 loaded to make it work and they recommend quality oil/wax. i only had maybe .4 probably close to .3 of crappy home made oil. so i could never get it to work. HOWEVER...... after reading MANY, MANY boards other than FC there are loads of users that have successfully used omicron carts on non-omicron batteries and swear by them. so if you have access to better (and more) oil/wax than me i would give it a try
 
mmenzie,

harmudge

Active Member
i am no expert but i bought this:
http://www.tropicalvapors.com/Adapt...artomizer-Omicron-Super-Nova-Smoore_p_68.html

and this fit on my EGO and allowed me to thread an Omicron cart onto it. this says it's for 510 devices and it fits mine without issue. so my natural assumption is my EGO is 510 threaded


Looks like it.
It's just a couple of weeks ago, my friends clearomizer packed up...so I offered her one of my cartomisers and she said that they won't fit, obviously I never thought any more of it until reading this thread here.
 
harmudge,

mmenzie

My friends call me "Menz"
so here is the answer i got from Thermovape when i asked them the same questions......

Hello,
I will be happy to address your concerns regarding the Low Voltage DART Cartridge. Yes, it is 510 threaded, and will thread directly onto your EGO vaporizer. You will only need to cycle the switch if you wish to continue vaping past the cut off. Hope this answers your questions.
Please let us know if there is anything else we can assist you with.
Cheers,
Travis
 
mmenzie,

Zipsort

Member
i wish i could tell you from experience but i can not. i do not have access to quality oil so i made some and it did not work. after asking around it seems i did not have enough loaded. i was told you need at least .5 and no more than 1.0 loaded to make it work and they recommend quality oil/wax. i only had maybe .4 probably close to .3 of crappy home made oil. so i could never get it to work. HOWEVER...... after reading MANY, MANY boards other than FC there are loads of users that have successfully used omicron carts on non-omicron batteries and swear by them. so if you have access to better (and more) oil/wax than me i would give it a try

If you would like I would be willing to walk you thru the entire process of creating great BHO. If you are willing to get the correct supplies (less than 50 or 100$) it can be done right very easily.

so here is the answer i got from Thermovape when i asked them the same questions......

Hello,
I will be happy to address your concerns regarding the Low Voltage DART Cartridge. Yes, it is 510 threaded, and will thread directly onto your EGO vaporizer. You will only need to cycle the switch if you wish to continue vaping past the cut off. Hope this answers your questions.
Please let us know if there is anything else we can assist you with.
Cheers,
Travis

Awesome dude I am thinking about ordering one just to be able to throw it on my G Pen
 
Zipsort,

mmenzie

My friends call me "Menz"
Awesome dude I am thinking about ordering one just to be able to throw it on my G Pen

isn't the Gpen already a single use dabber??? thats what the dart is too.... so i guess i don't understand why you would buy it for your Gpen if it does what the Gpen does already??
 
mmenzie,

Zipsort

Member
isn't the Gpen already a single use dabber??? thats what the dart is too.... so i guess i don't understand why you would buy it for your Gpen if it does what the Gpen does already??

I get at least 10-15 solid fat ass dab rips off the gpen. I merely want the dart for something different to try.

I own a thermovape as well.
 
Zipsort,
Top Bottom