• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued The Persei Vaporizer for herbs and concentrates.

jambandphan03

in flavor country
I wonder if that is vapor condensation, which will coat what ever it contacts and make it sticky. When you hit the herc, does the entire capsule inside get surrounded by vapor?
 
jambandphan03,

tharealmclovin

Well-Known Member
some but its more noticable on the outside cuz im touching it. it also caused the capsule to get stuck briefly
 
tharealmclovin,

Bob Loblaw

Astralnaut
am pretty sure that's the point. as there is no hole on the top, when heated vapor will come out the bottom, then up to the mouthpiece. unless i am mistaken? ur tank should get a little sticky on the bottom, cuz that's where it makes contact with the heater. am i wrong?
 

OF

Well-Known Member
am pretty sure that's the point. as there is no hole on the top, when heated vapor will come out the bottom, then up to the mouthpiece. unless i am mistaken? ur tank should get a little sticky on the bottom, cuz that's where it makes contact with the heater. am i wrong?

I'm not so sure here, Bob. What are the four grooves under the lip for? My take is the vapor is forced out them into the airstream (such as it is) coming up from below. The bottom looks to be sintered metal, only slightly porous (didn't someone report not being able to suck air though it?). If there was a hole in the bottom and seal at the top pressure would pump it dry before you ever made vaping temperature I bet?

With any luck at all tomorrow I'll find mine hiding at the PO and will get a close look at one.

OF
 

Bob Loblaw

Astralnaut
I'm not so sure here, Bob. What are the four grooves under the lip for? My take is the vapor is forced out them into the airstream (such as it is) coming up from below. The bottom looks to be sintered metal, only slightly porous (didn't someone report not being able to suck air though it?). If there was a hole in the bottom and seal at the top pressure would pump it dry before you ever made vaping temperature I bet?

With any luck at all tomorrow I'll find mine hiding at the PO and will get a close look at one.

OF
am pretty sure. the 4 holes are on the outside of the tank. i can blow thru it.
 
Bob Loblaw,
  • Like
Reactions: OF

OF

Well-Known Member
am pretty sure. the 4 holes are on the outside of the tank. i can blow thru it.

Well if you're looking at it you sure know more than I do. Looking at the photos carefully, the notches are outside the o-ring they must be to let vapor past the cap? So the vapor is generated in the voids in the metal forming the bottom of the capsule?

OF
 
OF,

Bob Loblaw

Astralnaut
seems like. am guessing that is why previous poster removed cap and got massive hits. also can see why that isn't recommended in case of tipping.
 
Bob Loblaw,
  • Like
Reactions: ataxian

Motavation

What is your Motivation!!
Yes I have seen the Stix video, infact its a iVapor model she puts in herself:) lol notice they call it trippy stick but its the old iVapor with a cartridge..lol

Well which do you want the persei from his noise or the ivapor from her:) lol I want neither~

That is the Berner Video that started the whole trippy stick marketing along with there videos and network and word of mouth promotion! TS vaporizers are the biggest known name as even Omicron, Atmos, ivapor, and other users still call there units a Trippy Stick.

Well if only the founders could of kept the spelling right and not been on the Pixie Stix lol

Since when did the persei start doing herb(s)?
 
Motavation,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Sorry but Omicron users don't call their units a trippy stick.

As for leaking can you better explain? As there is no way for it to leak out if the Herc, it might get some on the bottoms base of the ceramic but that vapes off also.
 
THC SCIENTIFIC,

ataxian

PALE BLUE DOT
PORQUIPLANE: I'm like you trying to consolidate to one system.

So I'm doing the "PERSEI VOYAGE"!

I like the HERCULES and will load it with some different concentrates. However the 2.4 cart has provided the biggest bang for the buck. I find them super efficient or did I just get luckily with a good batch of carts? The PURE GOLD I like as well. The taste when I put PG in a cartridge when I was learning was amazing. The best so far. The bummer was the leakage. I have not tried the PG with the HERCULES yet. For now I'm discovering all the different waxes we have here in California. However I'm hopeful the 1701 will do PURE GOLD in a efficient way!

Here is my next sample to try (24 K NITRO GOLD)
  • 72.2%TotalTHC
  • 4.6%TotalCBD
  • 0.6%
Your statement:
"as well as making it too easy to over-medicate"

Maybe that's why I sleep so well with the HERCULES.
Use sparingly!
 
ataxian,

ataxian

PALE BLUE DOT
Boy, I was with you right up to that point. I've never tried it, but IMO anything that eats up the stash at that rate will leave me HUGELY loaded.....

Otherwise I agree, we're talking slamming back boilermakers here, not sipping Champagne....

OF

Your analogy is pretty spot on!
 
ataxian,
  • Like
Reactions: OF

jpdnkstr

Well-Known Member
Its ok man. No troubles. Just dont see a simple solution. been waiting for this day for a while. couldnt afford to get more carts to leak the gold, especially with the sandy damages. thats a loss on the carts and the gold. but the herc, in the end, may be a greater loss (in overall concentrate use [i.e. using alot of oil], as well as making it too easy to over-medicate).

What can ya do... Wait for whatever happens and see what goes.


Edit: Thanks ataxian. Efficiency is a kind friend to the poor man. Persei is the only unit owned. No pipe, paper, bowl, piece, glass, or anything. Got rid of all of it when got persei. So it all comes down to the unit. Cause this unit has alot of potential. covers all thatd itd be needed for here, just cant leak out Dollar Signs(the gold).
Where do you access PG that sustained damage from hurricane Sandy?
 
jpdnkstr,

Darb

Well-Known Member
I have only been using my Persei with the bender for a while now.
It took me way too long to get the desired effect with the original carts.
While it might not be for everyone, it seems like it will be perfect for me.
I can't wait until mine arrives!
 

Porquiplane

Look Into My Eyes
Where do you access PG that sustained damage from hurricane Sandy?

Its not really accessible except cali and washington (as per their site). You know how things go for things that are unaccessible.... there is someone somewhere who can find something. Just stocked on a 10 when they came. Blew 5, now 5 left. Nowhere where most likely you are from should have it. But its worth it.
 
Porquiplane,

nickzzzx

Well-Known Member
Got my herc at the post office this morning...what a work of art, fantastic design, feels very high quality. Love the fit and finish of everything. 3 tanks instead of 2 was a nice bonus as well!

Cleaned it with iso alcohol now I'm breaking in the ceramic element. After that I'll load up a tank and see what this thing can do :)

Revision:
Only had a tiny bit to test out but it tasted a lot better in the Herc than it did in the original persei cart, more pure and unadulterated (no weird tastes, just oil like you would expect from a ti pad). Some flowed to the bottom from the tank and collected around the base of the heating element, is this normal? Is this unit a load as you go system or is it possible to load more than .1-.2 without it all flowing to the bottom and collecting around the bottom of the heating element. Does it still vaporize down there (around the base of the heating element? Can't wait to load in some fresh oil and try it out some more with better stuff.

The two air intake holes do get slightly clogged from the oil collecting on the bottom but it doesn't seem to impede air flow because the entire mini-hammer gets pretty hot. I wonder how bad it would get clogged if more oil were on the bottom. Looks like we need to keep this thing clean.
 

ataxian

PALE BLUE DOT
Revision:
Only had a tiny bit to test out but it tasted a lot better in the Herc than it did in the original persei cart, more pure and unadulterated. Some flowed to the bottom from the tank and collected around the base of the heating element, is this normal? Is this unit a load as you go system or is it possible to load more than .1-.2 without it all flowing to the bottom and colling around the bottom of the heating element. Does it still vaporize down there (around the base of the heating element? Can't wait to load in some fresh oil and try it out some more with better stuff.[/quote]

The taste of the different waxes is definitely better than a cart so there is a trade off:

Yield verses Flavor and Effect
I am new to this however so far I like it and I'm starting to understand it better.

A few minutes ago I loaded up some flowers mixed with kief. (4g Indica + 1g Kief is my cocktail)
Fresh Betteries and WOW! Kicked by behind! I started engineering a glass or ceramic bowl for the use of flowers in the HERCULES.

This thing is not over it has a lot of potential!

My SOLO is good however I think the HERCULES is way stronger!
 
ataxian,
  • Like
Reactions: Puffers

dankd420

Member
I reboiled my herc 3 more times. I will have to mention to watch your water level. I probably let it boil closer to 10 min and the level boiled down to only covering 2/3 of the black outer shell. End result is that the black coating developed a bubble and flaked off. Perhaps some sort of screen that holds the items off the bottom of the pan would work too.

Another note clean any sticky residue from the persei head. Its never caused my carts issues but the bottom thread from the herc managed to stick to it(perhaps it heats more there than normal carts which caused it to stick so well) and then seperate the threading from the base. Sadly this puts me out of comission.

DankD
 
dankd420,

nickzzzx

Well-Known Member
I reboiled my herc 3 more times. I will have to mention to watch your water level. I probably let it boil closer to 10 min and the level boiled down to only covering 2/3 of the black outer shell. End result is that the black coating developed a bubble and flaked off. Perhaps some sort of screen that holds the items off the bottom of the pan would work too.

Another note clean any sticky residue from the persei head. Its never caused my carts issues but the bottom thread from the herc managed to stick to it(perhaps it heats more there than normal carts which caused it to stick so well) and then seperate the threading from the base. Sadly this puts me out of comission.

DankD
Sorry to hear about that :( thanks for the tips
Maybe something like this would be useful in boiling..
Tea-Strainer-16540825690.jpg

But why boil? Why not just find a sealable cleaning container and fill it up with iso alcohol and use that as a reusable soak/clean bath. When the alcohol solution becomes too saturated with oil, evaporate the alcohol and reclaim the oil.
 
nickzzzx,

jambandphan03

in flavor country
all of the "ecig" stuff that was coated with a color (black, titanium etc) seem to all peel after a few soaks of Iso or boil... just the nature of the coating used to color the metal.

DankD what broke due to the oil on the threads? The new cart or the Persei top? Oil in the threads is a bad thing, as it will act like superglue when cold.
 
jambandphan03,

dankd420

Member
all of the "ecig" stuff that was coated with a color (black, titanium etc) seem to all peel after a few soaks of Iso or boil... just the nature of the coating used to color the metal.

DankD what broke due to the oil on the threads? The new cart or the Persei top? Oil in the threads is a bad thing, as it will act like superglue when cold.

Basically when i went to unscrew the hercules, the hercules came off but the thread was still screwed into the persei.

EDIT:
InWVj.png

DankD
 
dankd420,

tharealmclovin

Well-Known Member
Sorry but Omicron users don't call their units a trippy stick.

As for leaking can you better explain? As there is no way for it to leak out if the Herc, it might get some on the bottoms base of the ceramic but that vapes off also.

First off I wouldn't call it a LEAK. I think is more of oil resin building up. I See now what causes it. I think in my impatient training I held the button to long and the condensation G mentioned built up. It's not a big deal.

I think we need a new word for it since its not a leak. How about "Vapor Condensation Buildup"
 
tharealmclovin,
  • Like
Reactions: Bob Loblaw

OF

Well-Known Member
Oil in the threads is a bad thing, as it will act like superglue when cold.

All too true. And it can lead to Omicron owners private little hell complete with it's own twisted catch 22 if you have a V1 or are using an e-cig that charges through the socket and it's dead with the cart stuck on and you can't heat it to break it loose to charge it because you need the charge.....

I've had to resort to fire, not a comforting thing to do. So nice to put fresh batteries in the other end.

OF
 
OF,
Top Bottom