Tek Spiderman's Oil Extravaganza!

tepictoton

Well-Known Member
def looks nice.

so my best guess is i hit the buttom of my chamber and it got way to hot...will be more carefull next time :doh:
 
tepictoton,

Purpl3_Haz3

On a Permanent Vakation
tamisium. a closed butane recycling system. unreasonably pricey, but safe as fuck.

and i am serious believer in no "stupid" questions. ignorance isn't unintelligent. clinging to ignorance is, lol
hehe saw that before, unfortunately out of ky league for now...

Very reasonably priced alternative to the tami ----> http://skunkpharmresearch.com/ They have instructions on how to make what's called a Terpenator, and links to buy them, along with a multitude of info on cannabis, extracts, etc. Click, read, learn, re-produce :nod: I highly suggest reading every article on this website, especially those pertaining to concentrates, etc.
 

Bob Loblaw

Astralnaut
Very reasonably priced alternative to the tami ----> http://skunkpharmresearch.com/ They have instructions on how to make what's called a Terpenator, and links to buy them, along with a multitude of info on cannabis, extracts, etc. Click, read, learn, re-produce :nod: I highly suggest reading every article on this website, especially those pertaining to concentrates, etc.
yea, those guys do great work. the terpinator is around a grand as well and isn't quite as tested, which is why i went with a tami, but give them a few more years and i'll likely be getting one of those as well.
 

Purpl3_Haz3

On a Permanent Vakation

GOATPUSSY

Active Member
Ok. I just received the oil slick DUO pads from amazon. $11 free shipping. They look realllllly nice and I can't wait to use them but MAN! These pads are tiny. About 3' x 4.5'. Postcard size. I'm sure ill be able to make good use of them but just want to give a heads up to peeps thinking its this huge pair of pads. It's not.

I will say tho... I ordered these on Monday and there here on the east coast for Wednesday. Super quick shipping!!
 
GOATPUSSY,

Puffers

Micro-Climate Mastermind
Very reasonably priced alternative to the tami ----> http://skunkpharmresearch.com/ They have instructions on how to make what's called a Terpenator, and links to buy them, along with a multitude of info on cannabis, extracts, etc. Click, read, learn, re-produce :nod: I highly suggest reading every article on this website, especially those pertaining to concentrates, etc.

:tup: skunk pharm has great info for every level of aspiring canna-alchemist :science:

PH did you see the extractor he made that's electronically controlled :drool: I geeked out on the relay pack and controls on that bad boy :lol: this is why my wife says I'm a nerd hahaha
 

Purpl3_Haz3

On a Permanent Vakation
:tup: skunk pharm has great info for every level of aspiring canna-alchemist :science:

PH did you see the extractor he made that's electronically controlled :drool: I geeked out on the relay pack and controls on that bad boy :lol: this is why my wife says I'm a nerd hahaha
OMG It is amazing! When I saw that, I just couldn't believe it! Everyone I talk to about this stuff, is just like, "Fascinating :|" And I'm all like, "But, you don't get it!" :lol:
 

Puffers

Micro-Climate Mastermind
OMG It is amazing! When I saw that, I just couldn't believe it! Everyone I talk to about this stuff, is just like, "Fascinating :|" And I'm all like, "But, you don't get it!" :lol:

Lmfao I know exactly what you mean I was at a friends house today showing him the persei and somehow started talking about winterizing bho with ethanol. i got the same kind of look that happens when I am explaining something related to my job (hvac) i.e. an airflow problem and mention fluid dynamics of air, heat transfer and refrigeration, ...... :rolleyes: welcome to my world :lol: that why I love places FC you guys :rockon:
 

smokum

I am who I am and your approval isn't needed!
Those oil slick pads & ball are a godsend !! :tup:

Not a speckle of oil on the glass (no scraping at all) and super easy to handle the errl.


suwmfq.jpg


After 12 vac purges:

xofsdz.jpg


Hardly wait to try a run of this PK once it's cured:

35ars6f.jpg
 

farscaper

Well-Known Member
I need a very small vac... does anyone know of one?

It seems that that really is the next step for me... move on to vac purge and once that's down... maybe a closed loop system custom made for little ol' runs like mine.
 
farscaper,

FLskwat

VAPOLITICS!
I need a very small vac... does anyone know of one?

It seems that that really is the next step for me... move on to vac purge and once that's down... maybe a closed loop system custom made for little ol' runs like mine.
7355a3.png

MightyVac metallic hand pump kits is what you want ! the only one that reaches really 29 psi and keeps them for more then 10 mn + with a vacuum chamber that can cop with < to 8 -10 g. of errls!

@smokum, 12 vac for that load is a little overdo IMO...at some point you are just oxydizing your oil with more and more tiny oxygene bubbles, right? I always stop at 5 for average 3gr of final product !

EDIT: read me right, not saying you did anything wrong or that lowered the quality of your product, just trying to determine where is the limit between efficiency/productivity and the added quality value it brings to the final product! My self, by security, used to do sometimes 8 or 9 vacs but the experience has shown me the product doesn't change that much after the 5th vac...so maybe you can save some time/energy in the process, that's all! Cheers!
 

Bob Loblaw

Astralnaut
7355a3.png

MightyVac metallic hand pump kits is what you want ! the only one that reaches really 29 psi and keeps them for more then 10 mn + with a vacuum chamber that can cop with < to 8 -10 g. of errls!

@smokum, 12 vac for that load is a little overdo IMO...at some point you are just oxydizing your oil with more and more tiny oxygene bubbles, right? I always stop at 5 for average 3gr of final product !

EDIT: read me right, not saying you did anything wrong or that lowered the quality of your product, just trying to determine where is the limit between efficiency/productivity and the added quality value it brings to the final product! My self, by security, used to do sometimes 8 or 9 vacs but the experience has shown me the product doesn't change that much after the 5th vac...so maybe you can save some time/energy in the process, that's all! Cheers!

i actually have an extra of those mityvac. was my first level gear. worked great. just got my oil slicks from that ebay post. thanks again to FLKswat and smokum! this set is great. ball came with logoed rubber band to keep it together and the jar to hold it (wasn't sure they'd come w/set). it has two of the small pads goat pussy got, the ball and a very large pad for spraying. so large that i'm thinking of cutting out a perfect circle to wedge into my tami and i'd still have over a third of it untouched. decisions, decisions.....
 
Bob Loblaw,
  • Like
Reactions: jpdnkstr

smokum

I am who I am and your approval isn't needed!
@smokum, 12 vac for that load is a little overdo IMO...at some point you are just oxydizing your oil with more and more tiny oxygene bubbles, right? I always stop at 5 for average 3gr of final product !

EDIT: read me right, not saying you did anything wrong or that lowered the quality of your product, just trying to determine where is the limit between efficiency/productivity and the added quality value it brings to the final product! My self, by security, used to do sometimes 8 or 9 vacs but the experience has shown me the product doesn't change that much after the 5th vac...so maybe you can save some time/energy in the process, that's all! Cheers!


Just felt like taking the vacs to the max for shit n giggles..... I managed 12 until I was only raising tiny bubbles with no substance rise, and I also started off not fully hot water purged just to see what would happen with using less heat to remain molten (which after the 4th purge need to be hit with a heat gun mildly for the remaining pulls anyways).

Frankly, I don't really notice that much of a difference in final between 4 and 12 pulls to be honest, other than it was starting to budder.

In other words........ I'm playing and just trying different things for my own sakes seeing that I wasn't pulling finger/hand/arm cramps using a hand pump any more.
 

jpdnkstr

Well-Known Member
Slick Balls full set on the way, on another note, can anyone tell me the pros or cons of blasting into warm water directly?
 

kushcabbage

vapor nerd
Slick Balls full set on the way, on another note, can anyone tell me the pros or cons of blasting into warm water directly?
I wouldn't blast into hot water as the butane might not seperate with a large surface area of water to diffuse into. I like warm pyrex with hot water bath underneath. I don't know how hard it would be to evap all the water out of the oil, but would certainly float on top. I got a set of the slick pads, need a chance to try them out! cheers
 
kushcabbage,

farscaper

Well-Known Member
I will level with you here. I had an oops that ended with oil in my water... Yes you can do it strait into water, yes it will purge, but your going to have a giant mess trying to get ur oil back out. The added water in ur oil will also casuse accelerated oxidization killing ur strength and it will never hard set to glass, it will always be a little tacky and it will sizzle and boil on ur ti and a boiling water spot doesnt taste so good on ti or quartz

I suggest aginst it, but its ur weed man.
 
farscaper,
  • Like
Reactions: jpdnkstr

jpdnkstr

Well-Known Member
I will level with you here. I had an oops that ended with oil in my water... Yes you can do it strait into water, yes it will purge, but your going to have a giant mess trying to get ur oil back out. The added water in ur oil will also casuse accelerated oxidization killing ur strength and it will never hard set to glass, it will always be a little tacky and it will sizzle and boil on ur ti and a boiling water spot doesnt taste so good on ti or quartz

I suggest aginst it, but its ur weed man.
Thanks farscaper, I was wondering about the reduction in strength, anyone else please chime in also.
 
jpdnkstr,

smokum

I am who I am and your approval isn't needed!
Slick Balls full set on the way, on another note, can anyone tell me the pros or cons of blasting into warm water directly?

Your going to absolutely luv the oil slick products :tup:

I personally never (and still don't) understand the need or want to actually spray direct into water when the process of a separate dish of hot water purge works just fine :shrug:
 
Top Bottom