Discontinued Vaporblunt 2.0 & VB 2.0 DLX

TherealVaporblunt

Well-Known Member
Manufacturer
Here is the artwork for the box of the VB 2.0 DLX. We have 4 different scientific glass water attachments to choose from. They will also be sold separately, and will fit onto the original Vapor Blunt. I'll have more specific details posted in about an hour. I hope you all like this!!!


imagejpeg_2.jpg

imagejpeg_2b.jpg

VB20Iso.jpg

VB20Side.jpg

VB20Top.jpg

VB20withConsentratesAccessories.jpg
 

TherealVaporblunt

Well-Known Member
Manufacturer
Any general price range established?

It will vary between which glass attachment you want. retail range for the 2.0 dlx will be between $399 and $499. As for the 2.0 it is still to be determined, but I am hoping to keep it at $249. It comes with the oil attachment, the glass straw for the oil attachment and the adapter to add on a whip or use it on your existing water pipe . I feel it is the most versatile machine on the market.

Here's some quick talking points about vaporblunt 2.0, I'm working on the specific detail still.

1. It as half the length of the original vaporblunt

2. Led display with 5 programmed temperature settings ranging from 370 - 500 degrees

3. a conserdable improvement on heat up time, it's currently testing at 90 seconds aprx

4. Additional oil accessory cap and glass straw included

5. Shallower, wider bowl for easy loading

6. Turning knob
7. completely straight, easily cleanable vapor path.

This is all included in the vaporblunt 2.0 basic. The 2.0 DLX will have all this plus the water attachment of your choice, as always discounts for FC members will apply.
 
TherealVaporblunt,
  • Like
Reactions: darkrom

TherealVaporblunt

Well-Known Member
Manufacturer
What is the vapor path made of?

Have you developed cleaning techniques / tips?

:peace:

the vapor path is stainless steel, and it is completely straight. we made the bowl wider and changed the screen to allow better access for cleaning.
 
TherealVaporblunt,
  • Like
Reactions: darkrom

CentiZen

Evil Genius in Training
Accessory Maker
I really like the looks of the unit, it seems that you could fit a very beefy battery in there. What size of cell are you using? If it's bigger than the 18650 than I think it's safe to say that this will have the best battery life in a portable.

However I really don't think that the guys over at VapeXHale will be very happy about the incorporation of the water tools. They are very similar in design to the HydraTubes which VXH has patented. I would be worried about potential litigation emerging from such a situation.

Either way, I like the futuristic look of it. Is there any way you could provide an estimate as to size? It dosen't really look to pocket able from the pictures
 
CentiZen,
  • Like
Reactions: darkrom

Pcpvapors

Well-Known Member
It's not in this thread but he has gained approval from the cloud camp to use hydratubes.
 
Pcpvapors,

CentiZen

Evil Genius in Training
Accessory Maker
Wow really? That's really great to hear! Makes me feel good that these two competing companies are willing to cooperate like this.
 
CentiZen,
  • Like
Reactions: Teedub

newVaper420

Vapor Enthusiast
I actually really like this. It's awesome. Price is kinda high, but I guess not really. I like the water attachments. Can't wait to see this thing in action.
 
newVaper420,

SD_haze

Well-Known Member
Here's my shoutout to the scientific glass water attachments.

Make sure the splashguard is open enough that emptying the water out isn't a big chore!
:ko:
 
SD_haze,
  • Like
Reactions: Kief

TherealVaporblunt

Well-Known Member
Manufacturer
Wow really? That's really great to hear! Makes me feel good that these two competing companies are willing to cooperate like this.

I have nothing but nice things to say about VXL. We are both business people and it took less than a week to find a middle ground. I do not feel comfortable disclosing the details of our arrangement as it's a private matter. I also do not want to talk for them and I really do not know if they are going to mention anything about any of this, so this is going to be the only post I make regarding this issue.

As for the battery, there are 2 AA Lithium ION batteries that are 2200 mAh, so there are in fact Two 18mm dia by 65mm long batteries powering this unit. It defiantly fits in your pocket, its 5 3/8 inches Length with a 1 7/8 inch Diameter at its thickest point. It's on the larger side of a pocket tape, but unless your rocking skinny jeans your bulge won't be to noticeable!!

I have been using this for a month and I can not wait until this thing comes out. I have been so excited to post this all on here, but I had to wait until the deal with VXL was done. I will openly admit that the number 1 thing in my life is making a vape that has a multi hundred page thread on FC. It drives me insane when I look at the VB thread and it has 24 pages and over a quarter of them is me. I want to be the best, and I want you all to like my products. This isn't just about money to me, I consider my work a service to the life expectancy of our people!


imagejpeg_2j.jpg
 

Mynameismud

Accessory Maker
Accessory Maker
1.21 jigawatts!!! This thing looks insane!!! May have to cancel my mivape preorder if this comes out first. Although 499, and even 399 is kinda pricey for a portable unit with stainless airpath and with glass that most likely will break if being transported around but 249 sounds awesome... Couple questions for ya

1) is the last picture in your first post of the glass straw for the oil adapter?
2) can you use the glass straw in the 2.0 without the oil adapter or is it strictly for oil? And if not can you hit it without the glass straw or dlx tubes?
3) is the adater for existing pipes that the 2.0 comes with, a ground glass joint and if so will it be availble in 14, 18mm etc...?

This may be my new go to vape and ill probably end up canceling my mivape preorder as well if i get this... Love the idea of the hydratube style mouthpieces, Planetvape has been working on a similar concept forever looks like you beat them to the punch...that being said, i probably wouldnt get the dlx version because of the steep price tag, even at 399$ id probably rather end up spending the money on a cloud, wish the dlx version was 249, or even 299 to compete with the mivape if it ever comes out but i understand that is wishful thinking....still highly interested in the 2.0 especially if i can use it with my bubbler and ill probably end up getting a dlx stem eventually if i do purchase the 2.0
 
Mynameismud,

Egzoset

Banned
Salutations TherealVaporblunt,

...I want you all to like my products.

Now that is a kind of argument i like: it's clear and direct. So direct i can't imagine a shorter path actually!

;)

...and i sincerely think intelligent people will listen if the manufacturer's offer meets the expectations of his future customers i would say!

Whatever it is that we are talking about, euh... I wish to know if it's going to be ready for Christmass, that's all (i just hope it's not written somewhere already!)... Oh, euh... By "ready" i mean something different from a new portable hitting the market all the sudden and then for months it's like they rushed it and they shouldn't have. Well, it's an hypothetical example but perhaps someone might wonder if it can happen. So, in my question the word "ready" would suggest that the ßeta testing phase has been over for a while now, if you see what i mean?...

Euh... I'm so sorry, i'm incorrigibly curious! It wasn't intended to bother. Good luck with this project!!

:peace:
 
Egzoset,

TherealVaporblunt

Well-Known Member
Manufacturer
1.21 jigawatts!!!

1) is the last picture in your first post of the glass straw for the oil adapter?

Yes, it just slips over and will be cheap to replace. even if your LHS doesn't carry VB products , an old school pre-glass on glass sleeve, i think 16mm, will work as a replacement, but ill check the details.

2) can you use the glass straw in the 2.0 without the oil adapter or is it strictly for oil? And if not can you hit it without the glass straw or dlx tubes?

Yes, the 2.0 is a machine with many functions. It can be hit like the old school vaporblunt through the flavored tip using the stir knob. It can also be used for flowers with the DLX ground joint adapter to vape by using almost anything. You could use a whip, an old bong, one of our water accessories, even direct to your mouth but It.s a little too hot to put your lips on comfortably

3) is the adater for existing pipes that the 2.0 comes with, a ground glass joint and if so will it be availble in 14, 18mm etc...?

18mm. We do not have a 14mm coming out, but if I get demand I can produce it rather quickly
 
TherealVaporblunt,
  • Like
Reactions: Egzoset

TherealVaporblunt

Well-Known Member
Manufacturer
1.21 probably wouldnt get the dlx version because of the steep price tag, even at 399$ id probably rather end up spending the money on a cloud, wish the dlx version was 249, or even 299 to compete with the mivape if it ever comes out but i understand that is wishful thinking....still highly interested in the 2.0 especially if i can use it with my bubbler and ill probably end up getting a dlx stem eventually if i do purchase the 2.0

The value of the water tool alone is $199.00 to $299.00 retail. I wouldn't go as far as saying they are as nice as Sovereignty or Toro, but they are very well made, complex scientific parts. I wish I could make it cheaper, but that is why we have a 2.0 and a 2.0 dlx package, as well as sell the water tool by itself in case you wish to add it later.

Salutations TherealVaporblunt,



Now that is a kind of argument i like: it's clear and direct. So direct i can't imagine a shorter path actually!

;)

...and i sincerely think intelligent people will listen if the manufacturer's offer meets the expectations of his future customers i would say!

Whatever it is that we are talking about, euh... I wish to know if it's going to be ready for Christmass, if you see what i mean?...

Euh... I'm so sorry, i'm incorrigibly curious! It wasn't intended to bother. Good luck with this project!!

No need to apologize, thats a great question. Yes it will be available for sale by Black Friday, and barring any unforeseen issues we will offer free shipping to the US, and all orders will ship by the next business day.

As far as the quality of the unit, I 100 percent guarantee that this product has been checked and tweaked obsessively. I am also working on a Palm 2.0, as I wish to incorporate all of my new information i've learned into it. It is probably not the smartest business move to keep making new versions as the design fees are hefty, but I learned so much while making the vb and palm that I felt like I would never be happy unless I redid them to make them absolutely perfect. Have a great weekend!

:peace:[/quote]
 

Vape N Bake

Disturbed
The design is very appealing to me. I am watching a few portable threads right now and what it comes down to for me is battery life and how efficient it is. Really looking forward to see what this sexy beast can do!
 
Vape N Bake,
Me too! I was just about to pull the trigger on a Inhalater, and then I found the Pax. Then I was just about to pull the trigger on the Pax, and then I found this. now I am stalled. What is the timeline on this puppy? Are we talking weeks? Months? Longer?
 
TheDudeNextDoor,
  • Like
Reactions: Gonzo

TherealVaporblunt

Well-Known Member
Manufacturer
Me too! I was just about to pull the trigger on a Inhalater, and then I found the Pax. Then I was just about to pull the trigger on the Pax, and then I found this. now I am stalled. What is the timeline on this puppy? Are we talking weeks? Months? Longer?

It will be for sale by the day after Thanksgiving, if not sooner.
 
TherealVaporblunt,
  • Like
Reactions: Egzoset

Vape N Bake

Disturbed
How are the batteries charged? USB, separate charger or something else? Have you tested how many hits per charge? What does the ABV look like? You know a video of a full session with and without water would be wonderful. :spliff:
 
Vape N Bake,

Mynameismud

Accessory Maker
Accessory Maker
Thanks for getting back so quickly! This looks like a game changer, im sooo excited now...cant wait to cancel my mivape preorder...completely understand the pricing, i was just giving my opinion from a broke college student, plus im already scheming up ways to get some extra money for a dlx...anyway got a couple more questions for ya

1)About usage, it looks like you pack the end cap and insert it one way to use like the old vb or reverse it to use with dlx tubes/oil/gong adapter? Is this correct/makes sense?

2) you said as of right now the 249$ will only come with an 18mm gong, but your working on a 14mm one...does this mean when it is released it will only come with 18mm but in the future it will be an option? Is there anyway I can special order a 14mm one when its released?

3) what is the thickness of the glass tubes (dlx) if you have that available?

4) about how long does a full charge last?

Thought i posted last night, had a couple more questions but i forget now...anyway like i said this seems like a game changer, im sure you wont have any problem getting hundreds of post in no time, ive already been telling/showing everyonei know cause all my friends have been waiting for me to get a mivape and they dont believe i found something better! Keep up the good work!

Any chance a video is in the works, i understand it is a very busy time, but it would be greatly appreciated. Thanks
 

TherealVaporblunt

Well-Known Member
Manufacturer
Thank you for all the kind words. I will work on a video this week, I will also get the details of battery life and post that by tomorrow. The 14mm adapter is not going to be out for until February, it was kind of an afterthought being our water tool uses 18mm.
 
TherealVaporblunt,
Top Bottom