The ELEV8R from Elev8 Vehicles

Want to try it out?

  • Yes

    Votes: 19 22.1%
  • Hell Yeah

    Votes: 55 64.0%
  • No, thank you

    Votes: 12 14.0%

  • Total voters
    86
  • Poll closed .

Tweakz

Well-Known Member
The quartz heater is standard 14mm? Not the herb chamber, but the heater.

Want to make sure we're talking about the same thing.

Yes, I understand you, a quartz heater is placed just in the camera, it seems to me that it is somewhere ~ 12 with something. I may be a little mistaken, but after all he gets into the tube means a little less in diameter. I saw your sticky brick runt in the corresponding thread on this forum, and I also had OG sticky brick. and also there is a lotus. but they are weaker in several important respects. if you don’t have one yet, then I highly recommend it !! I’ll post my video with the heating technique soon. I think it's perfect
 
Tweakz,
  • Like
Reactions: Planck

nonamekevin

Well-Known Member
Yes, I understand you, a quartz heater is placed just in the camera, it seems to me that it is somewhere ~ 12 with something. I may be a little mistaken, but after all he gets into the tube means a little less in diameter. I saw your sticky brick runt in the corresponding thread on this forum, and I also had OG sticky brick. and also there is a lotus. but they are weaker in several important respects. if you don’t have one yet, then I highly recommend it !! I’ll post my video with the heating technique soon. I think it's perfect
Definitely would love to see a video of your technique and clouds using the elev8r. Especially after saying that the runt is weaker in several respects, that's surprising to hear. :rockon:
 
nonamekevin,

GoldenBud

Well-Known Member
Is the heater have a "hole" that air can flow inside? or just the air that get pumped back into the heater itself?
 
GoldenBud,

Tweakz

Well-Known Member
Definitely would love to see a video of your technique and clouds using the elev8r. Especially after saying that the runt is weaker in several respects, that's surprising to hear. :rockon:
Ok bro will soon
Is the heater have a "hole" that air can flow inside? or just the air that get pumped back into the heater itself?

everything is true in the heater there is a hole from above, air enters through it, then it is converted into hot air by evaporating stuff. I heated so that I did not feel a hot stream, but giving out huge clouds! for this purpose I will direct the torch precisely to the recesses of the heater, not around the entire perimeter
 
Tweakz,

beyond6strings

Just another traveller in the Cannaverse
The quartz heater is standard 14mm? Not the herb chamber, but the heater.

Want to make sure we're talking about the same thing.

The quartz heater is approximately 18mm OD and 15mm ID. Hope this helps. It's a great device.
 
beyond6strings,

highasakite

Well-Known Member
its a standard 14mm.

NO!! Please don't get confused...Like Labpong said, the heater is an 18mm male that fits into the bowl (18mm female). The bottom of the bowl has a 14mm male end to fit into your rig.

Is the heater have a "hole" that air can flow inside? or just the air that get pumped back into the heater itself?

Yes, the heater has a small hole where the air flows through. Do not heat the hole, just focus on heating the 4 "indents" on the heater.

For more tips, you can read my review - https://www.vapecritic.com/elev8r/
 

Tweakz

Well-Known Member
Yes, the heater has a small hole where the air flows through. Do not heat the hole, just focus on heating the 4 "indents" on the heater.

For more tips, you can read my review - https://www.vapecritic.com/elev8r/

yes bro all right. This is the best technique. just heat 4 indents evenly and nothing else is needed. Moreover, I think that a nozzle-burner for a gas cylinder is not an entirely suitable option. just a big torch perfect.

bro you have an excellent review, thanks to him and all these reviews on this forum I bought elev8r - I think it is now the best manual vaporizer. Incredible beast, huge clouds and great taste !
 

beyond6strings

Just another traveller in the Cannaverse
This vaporizer deserves way more love than it gets on this forum. It offers some of the best flavor, biggest hits, and best extraction of any of my many other vapes. And it's a blast to use. And it's the one that's convinced two of my friends to get into vaping.

Just enjoyed some Cookie Wreck using my @Sneaky Pete Mega Globe. That combination is my absolute favorite. Wow.

Let's keep the Elev8r on the first page where it belongs!!
 

Diggy Smalls

Notorious
I have found that heating the elev8r is pretty easy and doesn't require any extra thought or effort. You can aim the flame at the indentations, but in my experience it doesn't matter. I have not ever scorched a load and I never time it. Once and a while I get a wispy hit at first, but I would really have to torch the heater a long time to scorch the load. I've done almost a minute and it's still good.
Don't fear the heater, just point flame at it for a while
 
Last edited:

Tweakz

Well-Known Member
This vaporizer deserves way more love than it gets on this forum. It offers some of the best flavor, biggest hits, and best extraction of any of my many other vapes. And it's a blast to use. And it's the one that's convinced two of my friends to get into vaping.

Just enjoyed some Cookie Wreck using my @Sneaky Pete Mega Globe. That combination is my absolute favorite. Wow.

Let's keep the Elev8r on the first page where it belongs!!

absolutely agree with you. elev8r is the best of all my vapes, that's for sure. I prompted at least ten people to buy it, and they all remained in great happiness.
 

Diggy Smalls

Notorious
Tonight I was high and thought "hey, the Elev8r heater fits on top of my iheat (one of the box mod dry herb Vapes)."
Then I noticed there was a little screen in there set back a bit.
Then I wondered if it could be used as a stem for this other vape. And it can. I love my elev8r. And I won it, too. I'm still rocking one of my original heaters. My package came with two heaters and the one with the little nub broke pretty early on. I've been using this heater since then.

I love the glass wand that comes with it, but it would be even cooler if it were shorter and had a structure like the heater. The extra surface area does wonders to cool the vapor. Just a suggestion. I used to use the want with all of my Vapes, but it didn't quite dissipate enough of the heat for me to use it with the elev8r.
But that's one of the things I love about this vape. It's a bunch of glass in standard sizes that is awesome out of the box. But then when I'm high I can play around with the individual glass pieces and how they interact with other Vapes.

Anyway. This is my third vape from y'all and I love them all differently. The LSV is a beast, but this mommajomma hits way harder. Wow. I honestly don't use it every day, just weekends and special times. Each draw is so potent and intense. I don't want to become acclimated to that level of THC

Anyway. That's all I got.
 

LabPong

Well-Known Member
Definitely would love to see a video of your technique and clouds using the elev8r. Especially after saying that the runt is weaker in several respects, that's surprising to hear. :rockon:

Elav8R, G43, Flowerpot......are all hella stronger than a stickybrick. They are because they have much larger heating masses.
 
LabPong,

nonamekevin

Well-Known Member
Elav8R, G43, Flowerpot......are all hella stronger than a stickybrick. They are because they have much larger heating masses.
But wouldn't you consider the torch used with a sticky brick as an infinitely sized heating mass?
 
nonamekevin,

canj00digit?

All my days in a daze...
This vaporizer deserves way more love than it gets on this forum. It offers some of the best flavor, biggest hits, and best extraction of any of my many other vapes. And it's a blast to use. And it's the one that's convinced two of my friends to get into vaping.

Man, you ain't lyin'.

I was a active member of FC until I finally got a Sublimator (5yrs ago or so) then, shortly after, a Mighty and both those really satisfied me and cured my VAS. The Sub is still the heaviest hitting desktop I've ever used. I have a Flowerpot Showerhead that only plays back up role, after testing it out I relegated it to adequate back up but never reached for it over the Sub.

But for years I'd been eyeing the ELEV8R and it seemed very interesting. But it wasn't until I had a bit of an extended blackout and couldnt use the Sub and ran the battery out on the Mighty and had to turn to smoking (ugh) that I realized I needed a new zombie apocalypse vape. I had a Lotus many years ago but it wasn't for me and made me overlook most flame vapes since.

Anyway... shit I ramble... so stoned... so I buy an ELEV8R (standard with quartz)... expecting it to be a adequate back up/change up for the Sub. Two days later I haven't hit the Sub since. WTF. I'm amazed. This thing delivers mind blowing (literally) clouds when you hit the sweet spot. I nearly whited out on one hit.
I'm using a Big Shot torch on low setting and heating for 30sec and it is perfect for me to draw decently fast and get extraction just short of charring which is how I love it.

My wife, who wouldn't touch other vapes than the Sub, loves the thing as well and wants to get another one to keep over at the computer station where she usually uses the Mighty with water adapter.

VERY impressed.
Love how simple it is.
Wow.
 

Tweakz

Well-Known Member
But wouldn't you consider the torch used with a sticky brick as an infinitely sized heating mass?
Do you mean if the lighter you use with sticky brick is suitable for elev8r? if yes, then I think we need a little more torch
 
Tweakz,
Top Bottom