MaxVapor E-Nail - 2018 Version

maxvapor710

Manufacturer
Manufacturer
@PoopMachine you can view the ChangeLog in the dashboard, it is one of the tabs in the left bar.

There were too many little things fixed to name them all, but users should expect better WiFi Connection, improved screen response time, and some Audio improvements at the minimum.

With this update finally in place we can start rolling out the Heating Profile fixes and new Bluetooth features required for the Mobile App in the coming weeks.

The first new profiles will have 710Coils Axial / Banger combo, NewVape DCup, and VROD settings as a start.
 

invertedisdead

PHASE3
Manufacturer
I’m excited to be a part of this. Think I’m jumping in at a great time!

:cheers:

You're gonna dig it 52! Awesome old school Made-In-USA build quality, can't recommend the MaxVapor controller enough! Great device, and great people behind it, who actually dab!

Welcome aboard!

:party:

Got the trusty MV fired up par the course, and a bit of Blueberry Haze Live Rosin bubbling this morning.
Actually pulled my sapphire insert the other day for a couple UPTEMPS off quartz, I was enjoying the different effects you can get out of the same strain when dabbing uptemp vs static vs cooldown.

Also experimenting with some decarboxylated extracts right now to compare the perceived potency vs the raw. Interesting stuff!! :freak:
 

started@52

Well-Known Member
@PoopMachine you can view the ChangeLog in the dashboard, it is one of the tabs in the left bar.

There were too many little things fixed to name them all, but users should expect better WiFi Connection, improved screen response time, and some Audio improvements at the minimum.

With this update finally in place we can start rolling out the Heating Profile fixes and new Bluetooth features required for the Mobile App in the coming weeks.

The first new profiles will have 710Coils Axial / Banger combo, NewVape DCup, and VROD settings as a start.
What coil are you basing the Vrod profile on? Do you make an adapter to run a NV coil? I know there is a reverse head for the Vrod to work with coils wound differently then the NV also.
 
started@52,

PoopMachine

Well-Known Member
@PoopMachine you can view the ChangeLog in the dashboard, it is one of the tabs in the left bar.

There were too many little things fixed to name them all, but users should expect better WiFi Connection, improved screen response time, and some Audio improvements at the minimum.

With this update finally in place we can start rolling out the Heating Profile fixes and new Bluetooth features required for the Mobile App in the coming weeks.

The first new profiles will have 710Coils Axial / Banger combo, NewVape DCup, and VROD settings as a start.

Right on! Glad to hear things are moving ahead!!

I will say that my unit still doesnt seem to be connecting to the dashboard. I know you were working on a bug fix for my situation but as best I can tell, its still not working.
 
PoopMachine,

started@52

Well-Known Member
Well this thing is just too awesome! I on the other hand am not. Is there a way to reset it to default or does someone know the default pid settings? I adjusted the wrong setting and forget where it was to begin with.
 
started@52,

maxvapor710

Manufacturer
Manufacturer
I am not sure if you can set it on the device in the current firmware as I am normally running testing versions on my personal unit, but it would most likely be under the PID settings.

If not, you can create a heating profile in the dashboard and then sync it to your unit with the offset.
 

started@52

Well-Known Member
I am not sure if you can set it on the device in the current firmware as I am normally running testing versions on my personal unit, but it would most likely be under the PID settings.

If not, you can create a heating profile in the dashboard and then sync it to your unit with the offset.
I have been playing, just not sure where to use surface offset vs heater offset and is there any special temperature to dial it in at? Yup, I’m becoming a pia, lol.

Pretty nifty, lol. And @maxvapor710 support is top notch too!
6-A3-EC3-C0-B81-C-46-E4-B397-C2101794547-E.jpg
 
Last edited by a moderator:

maxvapor710

Manufacturer
Manufacturer
For anyone still having issues with their unit disconnecting periodically, we hope to have a firmware and backend patch up sometime this weekend.

Thanks,
MaxVapor
 

DSA-JCH

Member
@PoopMachine you can view the ChangeLog in the dashboard, it is one of the tabs in the left bar.

There were too many little things fixed to name them all, but users should expect better WiFi Connection, improved screen response time, and some Audio improvements at the minimum.

With this update finally in place we can start rolling out the Heating Profile fixes and new Bluetooth features required for the Mobile App in the coming weeks.

The first new profiles will have 710Coils Axial / Banger combo, NewVape DCup, and VROD settings as a start.
Thank you Max Vapor & Shane at 710 Coils! 2 absolute legends!
MV unit is AMAZING! Real deal Holyfield! No made in China crap! This was made in USA from people who actually dab. The customer support is 100 & the unit itself is 100. I LOVE IT.
710 Coils is the BEST! Truly AMAZING! Shane is incredible what he is doing with his Coils & everything at the store is excellent (quartz nails etc) & finally thank you fuck combustion (FC Forum) saved me! Thank you to all the members who had this forum also. Hope everyone is well and take care.
 
DSA-JCH,
  • Like
Reactions: 710Coils
My unit now keeps temp +/- 1 degree. When I first got it, it held +/- 5 degrees. Very nice improvement. I did use auto tune once. Im using the 710coils axial banger.

My unit also shows solid heart but no longer syncs with the dashboard. Deleting and using add device with a new cloud code does not fix this, but I imagine will be resolved in the next firmware update.

Im also really looking forward to the heating profiles and bluetooth function. This unit keeps getting better and better.
 
windshieldking,

maxvapor710

Manufacturer
Manufacturer
The dashboard is currently under maintenance and your units may lose connectivity randomly over the next few days while we work to resolve the issue permanently.

Thank you everyone for your patience.
 
maxvapor710,

maxvapor710

Manufacturer
Manufacturer
@MAbud despite my love for all of the additional colors, the demand so far has easily been 95% for black units only.

We do allow customers to request custom colors, so technically we could make you a silver unit, but you would have to wait until the next time we do a machining run of the cases to receive it, which can sometimes be a few months.
 
Top Bottom