• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

YaMon

Vaping since 2010
Expand on this a bit, would ya? Maybe I'm just a stoner, but I find myself using 3/4-4/5 of a shovelhead bowl most times I use my Weedeater, which is easily 3-4 times the amount needed to cover the double weave screen.

So, if you're using just enough to cover the screen, are you also one of those "high rollers" using temperatures of like 750? I typically use a mostly full shovelhead at around 650, which takes about 6-7 big hits (stirring inbetween) to complete. After 4-5 such bowls, I usually have to clean the screen, so every day or two.

If you want to get super baked, do you just do multiple rounds of just enough weed to cover the screen? Or is that small amount typically sufficient?
Yes, I fly high at 747 F. I enjoy the ritual of killing it quickly and reloading, but frankly that is not necessary for me. Most of the time I load 1 NewVape Pax Loading Tool at a time. 2 NewVape Pax loading tool scoops a night takes care of me, perhaps I am a lightweight, but those I hang out with do not seem to think so.

I don't see anything wrong with loading bowl right up, it's a preference for me that is influenced by my need to suck every bit of goodness out of my herbs. I have an OG FlowerPot, so I am not sure what the temperature would be on the VRod, but give a fine grind scoop a rip at these temps if you have not already. Take a walk on the high side. :spliff:

Edit: I have pretty high quality herbs, not the best I've had, but pretty darn good for an un cool state.
 

EmDeemo

ACCOUNT INACTIVE
I have never even thought of trying that. A super packed bowl at a lower temp. Going to try that in a few.

The insulated wood handle WORKS AMAZING! I had that sucker on there 20-30 mins @ 689f and you can hold it just fine. Amazing work NV!!! It's quality of life improvements like this that really set this ecosystem apart.

I noticed the wood handle will spin ever so slightly after it's at optimal torque, preventing over-torque. Don't get me wrong, it's super snug. But nice touch even if not on purpose.

With a full bowl of very good flower, ya can easily get really, really satisfying vapour at low temps. Obviously, it depends on how all your other adjustable factors are (draw speed, type of glass, capped or uncapped), but the flavour is incredible and big complete extractions are very doable.
 

Gigsabits53

Well-Known Member
So yesterday USPS decided not to knock on my door letting me know I had a package. Instead they left a slip in the mailbox even though I was home. Anyway, picked it up this morning and after running some errands I finally had a chance to unbox (everything perfectly packed which I appreciate) and give it a go after a burnoff. I have my VROD set at 650F and it works tremendously!:)

I gotta say, if you need a big, face-melting hit, this is the vape for you. I absolutely love this thing so far! I bought the tall straight tube water piece although I am using it dry at the moment. Also really like that threaded loading tool !

When un-boxing I picked up the metal stand and was impressed with the weight of it. This is all very well made equipment.

Very well done NewVape! Thank you!! :clap:
 

Baron23

Well-Known Member
I enjoy the ritual of killing it quickly and reloading, but frankly that is not necessary for me. Most of the time I load 1 NewVape Pax Loading Tool at a time.

I do the same but run my SH at 700 F. Its so easy to empty and refill that, like yourself, I enjoy the ritual and particularly enjoy not slogging through a larger load once taste has gone south.

Cheers
 

Gigsabits53

Well-Known Member
Hell yeah, the options means you can tailor your experience in so many ways.

The whole line up is so simple, but really gives you access to all the 'mastering' options you could need :)
So true, it seems you can make this vape do whatever you want. This has been too simple. I usually struggle with new vapes at first, but not with this one.

I know its probably been answered, but does anyone know how much the loading tool holds? I have been alternating between full scoops and half scoops. This thing extracts the vapor nicely.

Very happy with my purchase!
 

YaMon

Vaping since 2010
So true, it seems you can make this vape do whatever you want. This has been too simple. I usually struggle with new vapes at first, but not with this one.

I know its probably been answered, but does anyone know how much the loading tool holds? I have been alternating between full scoops and half scoops. This thing extracts the vapor nicely.

Very happy with my purchase!
0.1
 

justcametomind

Well-Known Member
If the best scenario with the FP is a fine layer covering the bowl screen it’s a lot like the Herborizer digiTi I already own. For sure a little bit better since the heating element on the FP is wider and bigger but imho not enough to be sure my results will be considerably better with higher doses. I think my better guess would be a Sublimator if they still were in production. Or just stick with my Supreme 3 with Jcat mod for my knock out session before bed.
 
justcametomind,
  • Like
Reactions: pxl_jockey

Summer

Long Island, NY
@justcametomind, I'm brand new to a vape in the FP category, but from the little I know, it's like the expression born to late, but, in your case, bought too soon. :D

I would think that unless you have deep pockets or a rich relative, what you have fills this niche very well. But I do know that the FP is excellent & well-worth owning. I know for sure that nothing will ever surpass it for me :luv:, and I have some nice vapes in different categories. This vape truly reduces the VAS craving. Got me to reprioritize & drop a few vapes off my w/l. :nod:

You can always save, & then when you get it & see it's renowned value, you could recoup some by, dare I say, selling one of those 2 vapes. :uhoh: :cool: :lol:

Have a good Sunday. :)
 
Last edited:

YaMon

Vaping since 2010
If the best scenario with the FP is a fine layer covering the bowl screen it’s a lot like the Herborizer digiTi I already own. For sure a little bit better since the heating element on the FP is wider and bigger but imho not enough to be sure my results will be considerably better with higher doses. I think my better guess would be a Sublimator if they still were in production. Or just stick with my Supreme 3 with Jcat mod for my knock out session before bed.
That's only one scenario for you may certainly use a carb cap at lower temperatures reducing boiling point OR you may fill the bowl with herb AND/OR you may enjoy a dab with your flower OR you could just enjoy a dab on it's own. I have had the Herborizer on my radar for a long time, but I suspect evaluated on just the ritual alone (the preparing, using, reloading and cleaning) the FlowerPot has the advantage. That aside the FP seems far more durable lessening my yearning for the Herborizer.
 

Cannabis-Hardware-Ed

Seeking Higher Ground
Manufacturer
What if the dCup, and puffco peak (attachments) had an offspring? I'm looking for cool product name ideas for a next gen product? I'm thinking it's time for a new theme? Nautical, aerospace, ocean, bluegrass? Let's pick a good one for the next star is born? Once a good name is selected, and the first working prototype is tested. I will post a new fc dedicated thread. This next gen product is based around the exact 30mm sapphire dish the dcup uses. The idea is to make a Peak like base that accepts the same attachments but uses the dcup dishes, and a flat coil.
 

started@52

Well-Known Member
What if the dCup, and puffco peak (attachments) had an offspring? I'm looking for cool product name ideas for a next gen product? I'm thinking it's time for a new theme? Nautical, aerospace, ocean, bluegrass? Let's pick a good one for the next star is born? Once a good name is selected, and the first working prototype is tested. I will post a new fc dedicated thread. This next gen product is based around the exact 30mm sapphire dish the dcup uses. The idea is to make a Peak like base that accepts the same attachments but uses the dcup dishes, and a flat coil.
The Aqua-Dish
 

Justpassedu

Well-Known Member
What if the dCup, and puffco peak (attachments) had an offspring? I'm looking for cool product name ideas for a next gen product? I'm thinking it's time for a new theme? Nautical, aerospace, ocean, bluegrass? Let's pick a good one for the next star is born? Once a good name is selected, and the first working prototype is tested. I will post a new fc dedicated thread. This next gen product is based around the exact 30mm sapphire dish the dcup uses. The idea is to make a Peak like base that accepts the same attachments but uses the dcup dishes, and a flat coil.
Being based in Florida : Marlin – Sea fortress .
 

thevapist

Well-Known Member
If the best scenario with the FP is a fine layer covering the bowl screen it’s a lot like the Herborizer digiTi I already own. For sure a little bit better since the heating element on the FP is wider and bigger but imho not enough to be sure my results will be considerably better with higher doses. I think my better guess would be a Sublimator if they still were in production. Or just stick with my Supreme 3 with Jcat mod for my knock out session before bed.

We just posted numerous examples where the screen is not just lightly covered. You can load a whole bowl in this and get full extraction with no combustion.

Seems like you just want to keep your hands over your ears/eye though ;)
 

EmDeemo

ACCOUNT INACTIVE
What if the dCup, and puffco peak (attachments) had an offspring? I'm looking for cool product name ideas for a next gen product? I'm thinking it's time for a new theme? Nautical, aerospace, ocean, bluegrass? Let's pick a good one for the next star is born? Once a good name is selected, and the first working prototype is tested. I will post a new fc dedicated thread. This next gen product is based around the exact 30mm sapphire dish the dcup uses. The idea is to make a Peak like base that accepts the same attachments but uses the dcup dishes, and a flat coil.

Wait... What...

IM EXCITED!
 
Top Bottom